Menu
Your Cart

Tools and Mounting - page 3

Model: ESP8266-12-BOARD
A handy breakout board for ESP-07 and ESP-12 with a built-in pull-down resistor on GPIO15 and a pull-up resistor on the EN-pin. The breakout board also has the option of soldering a voltage regulator on it, so that the ESP module can also b..
€1.50
Ex Tax:€1.24
Model: ET-LABRADOR
All-in-one open-source USB Oscilloscope, Signal Generator, Power Supply, Logic Analyzer and Multimeter...
€27.75
Ex Tax:€22.93
Model: PCB15x20DUBHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture). Note: Due to the production process, some copper splinters may occur..
€3.50
Ex Tax:€2.89
Model: PCB2x8DUB
An experimental circuit board for placing and soldering components.   This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects!   Distance between holes: 2.54mm (default) Diameter holes..
€0.60
Ex Tax:€0.50
Model: PCB4x6DUB
An experimental circuit board for placing and soldering components.   This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects!   Distance between holes: 2.54mm (default) Diameter holes..
€0.70
Ex Tax:€0.58
Model: PCB5x7
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 5 x 7cm Note: This circuit board may be a bit crooked/hollow...
€0.60
Ex Tax:€0.50
Model: PCB5x7DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 5 x 7cm Note: Th..
€0.65
Ex Tax:€0.54
Model: PCB5x7DUB
An experimental circuit board to place and solder components on. This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects! Specifications: Color PCB: Green PCB type: Double sided Distance..
€0.80
Ex Tax:€0.66
Model: PCB5x7DIVERSELANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has several lanes and islands. (see image) Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 5 x 7cm ..
€0.65
Ex Tax:€0.54
Model: PCB6.5x14.5
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 6.5 x 14.5cm Note: This circuit board may be a bit crooked/ho..
€0.90
Ex Tax:€0.74
Model: PCB6.5x14.5LANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has lanes over the entire length (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 6.5 x 1..
€2.00
Ex Tax:€1.65
Model: PCB7x9
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 7 x 9cm Note: This circuit board may be a bit crooked/hollow...
€1.00
Ex Tax:€0.83
Model: PCB7x9DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 7 x 9cm Note: Th..
€0.65
Ex Tax:€0.54
Model: PCB7x9DUBHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture). Note: Due to the production process, some copper splinters may occur..
€2.00
Ex Tax:€1.65
Experiment PCB 7cm*9cm - Double-sided
2-4 Weeks
Model: PCB7x9DUB
An experimental circuit board for placing and soldering components. This variant is double-sided and can be soldered from both sides. Ideal for small hobby projects! Distance between holes: 2.54mm (default) Diameter holes: 1mm    ..
€1.50
Ex Tax:€1.24
Model: PCB7x9ENK
An experimental PCB for placing and soldering components.   This variant is single-sided and can therefore be soldered from both sides. Ideal for small hobby projects!   Distance between holes: 2.54mm (default) Diameter holes: 1mm..
€1.50
Ex Tax:€1.24
Model: PCB9x15
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 9 x 15cm Note: This circuit board may be a bit crooked/hollow..
€2.00
Ex Tax:€1.65
Model: PCB9x15DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 9 x 15cm Note: T..
€2.50
Ex Tax:€2.07
Model: PCB9x15DUB
An experimental circuit board for placing and soldering components. This variant is double-sided and can be soldered from both sides. Ideal for small hobby projects! Distance between holes: 2.54mm (default) Diameter holes: 1mm..
€2.50
Ex Tax:€2.07
Model: PCB9x15LANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has lanes over the entire length (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 9 x 15c..
€2.00
Ex Tax:€1.65
Model: PCB9x15TRIHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture). Note: Due to the production process, some copper splinters may occur..
€2.75
Ex Tax:€2.27
Model: FANSCREW-10MM-100X
These screws are suitable for the mounting holes of most axial cooling fans...
€3.00
Ex Tax:€2.48
Model: FANSCREW-7MM-100X
These screws are suitable for the mounting holes of most axial cooling fans...
€3.00
Ex Tax:€2.48
A USB breakout board from Feasycom that is compatible with various Bluetooth modules, including: FSC-BT826, FSC-BT836, FSC-BT986 etc...
€11.50
Ex Tax:€9.50
Model: FLRPI4CASE
The Flirc is an aluminum housing with built-in heatsink for the Raspberry Pi 4. This housing is very easy to assemble. Mounting material is included. Specifications: Dimensions: 94 x 66 x 26mm Color: Aluminum and black Materials: Plas..
€19.00
Ex Tax:€15.70
Model: FLRPICASEV2.1
The Flirc is an aluminum housing with built-in heatsink for the Raspberry Pi B+, 2(B+), 3(B+). This housing is very easy to assemble. Mounting material is included. Specifications: Dimensions: 93.5 x 66.5 x 27mm Color: Aluminum and blac..
€17.50
Ex Tax:€14.46
Model: FLRPI5CASE
The Flirc is an aluminum housing with built-in heatsink for the Raspberry Pi 5. This housing is very easy to assemble. Mounting material is included...
€20.00
Ex Tax:€16.53
Fnirsi 2C23T - 3-in-1 Handheld - Digital Oscilloscope - Multimeter - Waveform Generator
New
The 2C23T from Fnirsi is a handheld digital oscilloscope, multimeter and waveform generator...
€74.50
Ex Tax:€61.57
Fnirsi DS215H - Digital Oscilloscope
New
The Fnirsi DS215H is a compact, digital oscilloscope...
€74.50
Ex Tax:€61.57
Fnirsi FNB58 - USB Fast Charge Protocol Tester
New
With this module from Fnirsi you can analyze the USB voltage and current. Furthermore you can test and monitor virtually all major fast-charging protocols (QC2.0/3.0, FCP/SCP, PD2.0/3.0, VOOC/WARP, Super VOOC 1.0/2.0)...
€44.50
Ex Tax:€36.78
Fnirsi HS-02A Soldering Iron - 100W - Adjustable Temperature
New 2-4 Weeks
A soldering iron with adjustable temperature from Fnirsi.Note: No power supply is included. Ideally, a USB PD/QC charger with a minimum output of 100W is required, though a 65W powerful supply will also work: USB Fast Chargers..
€42.50
Ex Tax:€35.12
Fnirsi LCR-ST2 - LCR meter
New
The LCR-ST2 from Fnirsi is a compact LCR meter, also capable of measuring DC voltage up to 30V...
€37.75
Ex Tax:€31.20
Fnirsi SAG-55 - Hot Air Gun for Desoldering
New
The Fnirsi SAG-55 is a very handy hot air gun that can be used for desoldering components...
€54.00
Ex Tax:€44.63
Geekworm N502 Metal Case for Orange Pi Zero 3 - with Fan - Black
2-4 Weeks
Model: GW-N502
A firm metal case for the Orange Pi Zero 3, including a 4010 5V cooling fan. This protects the Orange Pi and cools it properly at the same time (see images). Note: The Orange Pi is not included...
€12.50
Ex Tax:€10.33
Model: GW-N505
A firm metal case for the Orange Pi 5(B) including a cooling fan and aluminium heatsink. This protects the Orange Pi and cools it properly at the same time (see images). Note: The Orange Pi is not included...
€12.00
Ex Tax:€9.92
Model: GW-N506
Een stevige metalen behuizing voor de Orange Pi 5(B), inclusief een ventilator en aluminium heatsinks. Hiermee is de Orange Pi beschermd en wordt hij tegelijkertijd goed gekoeld (zie afbeeldingen). In addition, this case also has room for an external..
€13.50
Ex Tax:€11.16
Model: GW-N515
A firm metal case for the Orange Pi 5 Pro of Orange Pi 5 Max, including a cooling fan. This protects the Orange Pi and cools it properly at the same time (see images). Note: The Orange Pi is not included...
€14.00
Ex Tax:€11.57
Model: GW-P579
A firm metal case for the Raspberry Pi 5, which allows enough space for an NVMe SSD...
€11.00
Ex Tax:€9.09
Model: GW-RAB-HOLDER
A convenient mounting plate on which you can mount a Raspberry Pi, Arduino and breadboard. This plate is compatible with the Raspberry Pi 3(B)(+)/4B/5, Arduino Uno/Mega/Leonardo/Due and standard 400 or 830 point breadboards (none of which are include..
€6.00
Ex Tax:€4.96
Model: X1202-C1
A firm metal case for the Raspberry Pi 5, designed with room to accommodate a X1202 UPS module...
€16.25
Ex Tax:€13.43
Model: GOOBAY17104
These self-adhesive cable holders from Goobay are ideal for easily bundling cables and keeping them in one place. The adhesive base makes this holder easy to mount on all kinds of surfaces. The shape of this holder makes it easy to attach cables usin..
€5.00
Ex Tax:€4.13
Model: GOOBAY56660
This waterproof enclosure from Goobay with glands makes it easy to make connections between 3 cables. Note: The terminal block visible in the images is not included...
€6.00
Ex Tax:€4.96
Goobay 59176 Hot Glue Gun - 20W - Ø11-12mm - with 2 Glue Sticks
Discontinued
Model: GOOBAY-59176
A hot glue gun from Goobay with two glue sticks...
€6.00
Ex Tax:€4.96
Model: GOOBAY70360
A roll of hook-and-loop fastener to bundle or fix e.g. cables. The roll can easily be cut to desired lengths using scissors...
€3.00
Ex Tax:€2.48
Model: GOOBAY70681
A set of 5 handy flexible cable holders with a 3M adhesive layer for easy mounting. The different cable holders are suitable for different cable diameters (see datasheet)...
€4.50
Ex Tax:€3.72
Model: GOOBAY70683
A set of 5 handy flexible cable holders with a 3M adhesive layer for easy mounting. The different cable holders are suitable for different cable diameters (see datasheet)...
€4.50
Ex Tax:€3.72
Model: GOOBAY72513
Convenient PVC clips for labeling cables...
€4.00
Ex Tax:€3.31
Model: GOOBAY72514
Convenient PVC clips for labeling cables...
€3.50
Ex Tax:€2.89
Model: GOOBAY72515
Convenient PVC clips for labeling cables...
€3.75
Ex Tax:€3.10
Model: GOOBAY77002
Quick drying super glue from Goobay. The glue is suitable for numerous surfaces, including ceramics, metals, plastics, glass, rubber and leather...
€1.50
Ex Tax:€1.24
Showing 101 to 150 of 575 (12 Pages)
1
false
true
true
Remove
Change
tr