Model: ZD-99KIT
This kit with a budget soldering station and lots of accessories is a good base to start soldering.
Specifications ZD-99 soldering iron:
Input voltage: 230VAC
Soldering iron power: 48W
Temperature adjustable with a range of 150-480°C (on..
€25.00
Ex Tax:€20.66
Model: VM-VTSS5
With this budget soldering station you can easily solder for a low price.
A standard 1mm tip is supplied with this soldering station with which you can perform both large and small soldering work.
Specifications:
Voltage: 230VAC
S..
€21.75
Ex Tax:€17.98
Model: ZD-99
With this budget soldering station you can solder perfectly for a low price.
At this soldering station a standard 1mm point is supplied with which you can do almost all the standard soldering work.
Specifications:
Voltage: 230VAC
..
€16.75
Ex Tax:€13.84
Model: CABLEGLANDM12
An M12 cable gland to make a waterproof cable entry.
Specifications:
Color: Gray
Material: Polyamide
Cable thickness: 3.0 - 6.5mm
Dimensions: See the datasheet under the tab "Downloads".
IP67 rating (if cable gland and cable are corr..
€0.60
Ex Tax:€0.50
Model: CABLEGLANDM16
An M16 cable gland to make a waterproof cable entry.
Specifications:
Color: Gray
Material: Polyamide
Cable thickness: 6.5 - 8.0mm
Dimensions: See the datasheet under the tab "Downloads".
IP67 rating (if cable gland and cable are corr..
€0.70
Ex Tax:€0.58
Model: CABLEGLANDM20
An M20 cable gland to make a waterproof cable entry.
Specifications:
Color: Gray
Material: Polyamide
Cable thickness: 8.0 - 12.0mm
Dimensions: See the datasheet under the tab "Downloads".
IP67 rating (if cable gland and cable are cor..
€0.85
Ex Tax:€0.70
Model: PW-D.3081
A cable gland to make a waterproof cable entry...
€1.50
Ex Tax:€1.24
Model: CASETPA3116-2X50-1x100
A kit to build a transparent case for a TPA3116 amplifier.
Specifications:
Suitable for:
TPA3116 2x50W and 1x100W Audio Amplifier - Bass-Treble Control
TPA3116 2x50W and 1x100W Audio Amplifier - Bluetooth 4.2 - Bass-Treble Control
..
€9.00
Ex Tax:€7.44
Model: CASETPA3116-2X50
A kit to build a transparent case for a TPA3116 amplifier.
Specifications:
Suitable for:
TPA3116 2x50W Audio Amplifier
Dimensions: 104 x 74 x 51mm
Package contents:
Enclosure:
6x Acrylic panel
4x M3 bolt 20m..
€10.50
Ex Tax:€8.68
Model: CASETPA3116-2X50BMT
A kit to build a transparent case for a TPA3116 amplifier.
Specifications:
Suitable for:
TPA3116 2x50W Audio Amplifier - Bass-Mid-Treble Control
TPA3116 2x50W Audio Amplifier - Bluetooth 4.2 - Bass-Mid-Treble Control
Dimensi..
€12.00
Ex Tax:€9.92
Model: ORNAMENTKIT
This kit contains everything to make a Christmas ornament with flashing lights for a unique decoration in the, for example, Christmas tree! In addition to hanging, it is also possible to place it on a 3D-printed stand (not included). See the fol..
€7.50
Ex Tax:€6.20
Model: VM-WSSA100B
This kit contains everything you need to builld your own christmas tree with lights. An extended manual is included in this kit.
Note: 9V Battery is not included...
€8.50
Ex Tax:€7.02
Model: DUPONTCLIPBLACK
This is widely used when you want to measure on the pins of a component.
You can connect this clip to a female dupont plug.
Almost indispensable in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
Model: DUPONTCLIPBLUE
This is widely used when you want to measure on the legs of a component.
You can connect this clip to a female dupont plug.
Almost essential in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
Model: DUPONTCLIPGREEN
This is widely used when you want to measure on the legs of a component.
You can connect this clip to a female dupont plug.
Almost essential in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
Model: DUPONTCLIPRED
This is widely used when you want to measure on the legs of a component.
You can connect this clip to a female dupont plug.
Almost essential in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
Model: DUPONTCLIPWHITE
This is widely used when you want to measure on the legs of a component.
You can connect this clip to a female dupont plug.
Almost essential in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
Model: DUPONTCLIPYELLOW
This is widely used when you want to measure on the legs of a component.
You can connect this clip to a female dupont plug.
Almost essential in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
"Congrats" DIY soldering kit for DIY kits. The pin headers can be used to solder the accessory PCB to the main PCB...
€2.40
Ex Tax:€1.98
Model: M3X6MM-100
A set of bolts...
€3.25
Ex Tax:€2.69
Model: VM-3696L
A handy, multifunctional pliers with a total of 4 different functions.
Specifications:
Built-in crimper:
Suitable cable lugs: Red (0.5-1mm²), blue (1.5-2.5mm²) and yellow (4-6mm²)
Built-in bolt cutter:
Suitable bolts: M2-..
€6.50
Ex Tax:€5.37
Model: VM-VTECT3
A handy tool for crimping bootlace ferrules.
Specifications:
Suitable bootlace ferrules: FCEB, FCEBK, FCEGY, FCER and FCEW
Crimping range:
0.25, 0.5, 0.75, 1.0, 1.5, 2.5mm²
AWG 24, 20, 18, 17, 16 and 14
Length pliers: 145m..
€17.50
Ex Tax:€14.46
Model: CUPCAKEDIYKIT
A DIY soldering kit for making a unique decoration with flashing lights...
€10.65
Ex Tax:€8.80
Model: CURVOLTMETER10A
Simply connect to the cables whose voltage is to be measured.
Voltage range: 7V-100VDC
Power range: 0-10ADC
Installation dimensions: 46x27mm
Maximum thickness of mounting material: 3mm
Recommended installation thickness: 2mm
Note: If the th..
€5.00
Ex Tax:€4.13
Model: SHEARCUTTER170
With this wire cutter you can cut cables or pieces of wire. E.g. to neatly cut off components on your circuit board. Think of the ends of LEDs or chips that protrude after soldering.
Specifications:
Cuts cables up to 18 AWG (1.0mm²)
Only s..
€4.00
Ex Tax:€3.31
Model: DESOLPUMP
Desoldering pump with teflon nozzle, made of ABS and aluminum.
Length: 190mm..
€4.00
Ex Tax:€3.31
Model: DESOLDERWIRE1MM
1mm wide solder ribbon for removing solder.
The desoldering ribbon "absorbs" the soldering tin.
Comes on a handy bobbin...
€2.00
Ex Tax:€1.65
Model: DESOLDERWIRE2MM
2mm wide solder ribbon for removing solder.
The desoldering ribbon "absorbs" the soldering tin.
Comes on a handy bobbin...
€2.00
Ex Tax:€1.65
Model: DESOLDERWIRE3MM
3mm wide solder ribbon for removing solder.
The desoldering ribbon absorbs the soldering tin.
Comes on a handy bobbin...
€2.00
Ex Tax:€1.65
Model: 582693478794
This is a development board for the ESP32-WROOM Wi-Fi module. The ESP32-WROOM can easily be connected to this. With the help of this board, the module can be controlled and programmed without having to solder...
€9.50
Ex Tax:€7.85
Model: DEVBOARDEPS32WROVER
This is a development board for the ESP32-WROVER Wi-Fi module. The ESP32-WROVER can easily be connected to this. With the help of this board, the Wi-Fi module can be controlled and programmed without having to solder.
This board uses a CP2..
€8.00
Ex Tax:€6.61
Model: DEVBOARD-ESP8266
This is a development board for ESP8266 Wi-Fi modules. Using this board, the Wi-Fi module can be controlled and programmed without soldering.
Specifications:
Compatible ESP boards: ESP-01, ESP-01S, ESP-07, ESP-07S, ESP-12E, ESP-12F, ESP-12S ..
€10.25
Ex Tax:€8.47
Model: DDADHESIVE
Brand: Devil Design
This adhesive for your 3D printer is easy to apply to your print bed and prevents loose prints. It is suitable for almost all materials, including ABS and ASA.
When the print bed has cooled down, the print can be easily removed with a spatula/putt..
€9.00
Ex Tax:€7.44
Model: DFROBOT-DFR0999
Brand: DFRobot
This plug-and-play tool makes using sensors easy by automatically converting their signals into simple data. It’s a great all-in-one device for science projects, teaching, and hobbyist electronics...
€40.75
Ex Tax:€33.68
Model: DFROBOT-FIT0647
Brand: DFRobot
A silicone case for the DFRobot HuskyLens: DFRobot Gravity HuskyLens - AI Camera - Vision Sensor..
€4.50
Ex Tax:€3.72
Model: DFROBOT-FIT0935
Brand: DFRobot
A silicone case for the UNIHIKER single-board computer. This case protects the single-board computer and makes it more comfortable to hold.
Note: the UNIHIKER board is not included...
€6.50
Ex Tax:€5.37
Model: DISCOBALLDIYKIT
A DIY soldering kit for making a unique decoration with flashing lights...
€10.35
Ex Tax:€8.55
Model: EIC-404
A breadboard that can be used for prototyping...
€15.00
Ex Tax:€12.40
Model: EIC-801
A breadboard that can be used for prototyping...
€3.80
Ex Tax:€3.14
Model: EIC-801-8
A breadboard that can be used for prototyping...
€3.75
Ex Tax:€3.10
Model: EIC-102
A breadboard that can be used for prototyping...
€6.00
Ex Tax:€4.96
Model: EIC-1302
A breadboard that can be used for prototyping...
€6.00
Ex Tax:€4.96
Model: CASE100x68x40MM
See images for the outer dimensions. Material is ABS plastic.
Inside dimensions: 93 x 61 x 31 mm (without legs on the inside), 93 x 61 x 25 mm (with legs on the inside)
Note: The inner dimensions are based on the dimensions in the middle. Inside,..
€3.50
Ex Tax:€2.89
Model: CASE100x68x40MMTR
See images for the outer dimensions. Material is ABS plastic.
Inside dimensions: 93 x 61 x 31 mm (without legs on the inside), 93 x 61 x 25 mm (with legs on the inside)
Note: The inner dimensions are based on the dimensions in the middle. Inside,..
€4.00
Ex Tax:€3.31
Model: CASE65x38x22MM
Specifications:
Inner dimensions: 61 x 34 x 18mm (without legs on the inside), 61 x 34 x 13mm (with legs on the inside)
Outer dimensions: see image
Material: ABS
The case must be opened carefully to prevent the legs from breaking. This..
€2.00
Ex Tax:€1.65
Model: CASE92x57x31MM
See images for the outer dimensions. Material is ABS plastic.
Inside dimensions: 86 x 52 x 25mm (without legs on the inside), 86 x 52 x 21mm (with legs on the inside)
Note: This type of housing may be slightly damaged on the top and botto..
€2.50
Ex Tax:€2.07
Model: XH-WH1209-CASE
A housing suitable for the XH-W1209 Digital Thermostat. This gives your Thermostat extra protection and a nicer finish.
Specifications:
Dimensions: 60x50x14mm
Supplied including screws, nuts and plastic washers
Note: The XH-W1209 Dig..
€2.00
Ex Tax:€1.65
Model: HT-WIFILORA32V3ENCLOSURE
An enclosure for the Heltec Wi-Fi LoRa 32 Boards.
Note: Heltec Wi-Fi LoRa 32 is not included.
Note: The Heltec Wi-Fi LoRa 32 V3 comes standard with an SMA antenna that doesn't fit inside the enclosure. See here for compatible antennas:
86..
€4.50
Ex Tax:€3.72
Model: TTMATRIX-ENCL-STD
A 3D printed enclosure for the TinyTronics Smart Home RGB LED Matrix. All parts are printed in Azurefilm PETG filament. This enclosure comes with feet at a 60 degree angle.
See product images for assembly instructions.
You can also print this h..
€9.50
Ex Tax:€7.85
Model: TTMATRIX-BEHUIZING-MUUR
A 3D printed enclosure for the TinyTronics Smart Home RGB LED Matrix. All parts are printed in Azurefilm PETG filament.
See product images for assembly instructions.
You can also print this housing yourself, the files for this can be found on t..
€9.50
Ex Tax:€7.85