Menu
Your Cart

Cables and Connectors - page 11

Model: GX16-6
With this sturdy connector you can make a good 6-pin connection. With this set you get both connectors with a mountable part and a part where you can attach a cable...
€2.20
Ex Tax:€1.82
Model: GX16-6-CONSETKEYWAY
With this connector set you can make a sturdy connection. The housing of the connectors is secured using a vertical screw keyway...
€2.70
Ex Tax:€2.23
Model: GX16-6-CONSETTWIST
With this connector set you can make a sturdy connection. The housing of the male connector is secured with a thread (twist fixation), the housing of the female connector is secured with a vertical screw keyway...
€2.70
Ex Tax:€2.23
Model: GX16-6-CONSETMOUNT
With this connector set you can make a sturdy connection. The housing of the male connector can be fixed on a flat surface with the supplied bolts...
€2.70
Ex Tax:€2.23
Model: GX16-7
With this sturdy connector you can make a good 7-pin connection. With this set you get both connectors with a mountable part and a part where you can attach a cable. Note: The picture shows the 6-pin version. This picture is for illustration purpo..
€2.20
Ex Tax:€1.82
Model: GX16-7-CONSETKEYWAY
With this connector set you can make a sturdy connection. The housing of the connectors is secured using a vertical screw keyway...
€2.70
Ex Tax:€2.23
Model: GX16-7-CONSETTWIST
With this connector set you can make a sturdy connection. The housing of the male connector is secured with a thread (twist fixation), the housing of the female connector is secured with a vertical screw keyway...
€2.70
Ex Tax:€2.23
Model: GX16-7-CONSETMOUNT
With this connector set you can make a sturdy connection. The housing of the male connector can be fixed on a flat surface with the supplied bolts...
€2.70
Ex Tax:€2.23
Model: GX16-8
With this sturdy connector you can make a good 8-pin connection. With this set you get both connectors with a mountable part and a part where you can attach a cable...
€2.20
Ex Tax:€1.82
Model: GX16-8-CONSETKEYWAY
With this connector set you can make a sturdy connection. The housing of the connectors is secured using a vertical screw keyway...
€2.70
Ex Tax:€2.23
Model: GX16-8-CONSETTWIST
With this connector set you can make a sturdy connection. The housing of the male connector is secured with a thread (twist fixation), the housing of the female connector is secured with a vertical screw keyway...
€2.70
Ex Tax:€2.23
Model: GX16-8-CONSETMOUNT
With this connector set you can make a sturdy connection. The housing of the male connector can be fixed on a flat surface with the supplied bolts...
€2.70
Ex Tax:€2.23
Model: GX16-9
With this sturdy connector you can make a good 9-pin connection. With this set you get both connectors with a mountable part and a part where you can attach a cable...
€2.40
Ex Tax:€1.98
Model: GX16-9-CONSETKEYWAY
With this connector set you can make a sturdy connection. The housing of the connectors is secured using a vertical screw keyway...
€2.90
Ex Tax:€2.40
Model: GX16-9-CONSETTWIST
With this connector set you can make a sturdy connection. The housing of the male connector is secured with a thread (twist fixation), the housing of the female connector is secured with a vertical screw keyway...
€2.90
Ex Tax:€2.40
Model: GX16-9-CONSETMOUNT
With this connector set you can make a sturdy connection. The housing of the male connector can be fixed on a flat surface with the supplied bolts...
€2.90
Ex Tax:€2.40
Model: HD-LINK-HDMIBREAKOUT
An HDMI breakout board...
€3.25
Ex Tax:€2.69
Model: MHDMI-TO-HDMI-ADAPTER
This HDMI to micro HDMI adapter is ideal for situations where you want to connect a screen that only has an HDMI output to the Micro HDMI input of your Raspberry Pi 4B...
€3.00
Ex Tax:€2.48
Model: HD-LINK-HDMISCHROEF-EXT
An HDMI to screw terminal adapter. With this version, the open sides of the screw terminals face the outside of the PCB, you can find a version here with the screw terminals facing inward: HDMI to Screw Terminal Adapter - Type B..
€4.75
Ex Tax:€3.93
Model: HD-LINK-HDMISCHROEF-INT
An HDMI to screw terminal adapter. With this version, the open sides of the screw terminals are toward the inside of the PCB, you can find a version here with the screw terminals facing outward: HDMI to Screw Terminal Adapter - Type A..
€4.75
Ex Tax:€3.93
Model: HRS-U.FL-R-SMT-1
An antenna connector for a printed circuit board...
€0.50
Ex Tax:€0.41
Model: ZX-HY2.0-4PZZ-GW
A Grove compatible connector for a printed circuit board...
€0.25
Ex Tax:€0.21
Model: ZX-HY20-4PWZ-GW
A Grove compatible connector for a printed circuit board...
€0.25
Ex Tax:€0.21
Model: JSTGHRTODUPONT6P
A handy adapter cable for the Sensirion SEN55 Environmental Sensor, for example...
€1.20
Ex Tax:€0.99
JST-PA Female to DuPont Female Compatible Cable - 5p - 30cm
New
Model: JSTPAF-DPF-5P30CM
A JST-PA to DuPont compatible cable. Note: The cable is suitable for Panasonic and Toshiba devices, but the colors don't logically correspond with the pinout. So check this carefully!..
€2.40
Ex Tax:€1.98
JST-PH 2p Compatible Connector with Cable
Discontinued
Model: JSTPH2.0CABLE2P10CM
This connector is often used to connect li-ion cells to a board. This cable can be connected to your li-ion or li-po battery so that you can connect it to your board...
€0.40
Ex Tax:€0.33
JST-PH 2p Compatible PCB Connector Male
2-4 Weeks
Model: JST-PHPCB2PMALE
A JST-PH compatible connector for a printed circuit board...
€0.10
Ex Tax:€0.08
Model: JST-PHPCB2PMALE90DEG
A JST-PH compatible connector for a printed circuit board...
€0.10
Ex Tax:€0.08
Model: JST-PHSMD2PMALE
A JST-PH compatible SMD connector...
€0.10
Ex Tax:€0.08
JST-PH 3p Compatible Cable - 20cm
2-4 Weeks
Model: 3PJST-PHCABLE20CM
This JST-PH compatible cable can for example be used in combination with a TA2024 amplifier...
€1.50
Ex Tax:€1.24
JST-PH 3p Compatible Cable - 30cm
2-4 Weeks
This JST-PH compatible cable can for example be used in combination with a TA2024 amplifier...
€1.50
Ex Tax:€1.24
Model: JST-PHPCB3PMALE
A JST-PH compatible connector for a printed circuit board...
€0.12
Ex Tax:€0.10
Model: JST-PHPCB3PMALE90DEG
A JST-PH compatible connector for a printed circuit board...
€0.12
Ex Tax:€0.10
Model: JST-PHSMD3PMALE
A JST-PH compatible SMD connector...
€0.12
Ex Tax:€0.10
Model: JST-PHPCB4PMALE
A JST-PH compatible connector for a printed circuit board...
€0.15
Ex Tax:€0.12
Model: JST-PHPCB4PMALE90DEG
A JST-PH compatible connector for a printed circuit board...
€0.15
Ex Tax:€0.12
Model: JST-PHSMD4PMALE
A JST-PH compatible SMD connector...
€0.15
Ex Tax:€0.12
Model: JST-PH-SET
A set with male and female JST-PH plugs and different housings...
€6.00
Ex Tax:€4.96
Model: JSTPH-DUPF-8P15CM
A JST-PH to DuPont cable...
€1.20
Ex Tax:€0.99
Model: JSTPH-DUPF-3P15CM
A JST-PH to Dupont cable...
€0.70
Ex Tax:€0.58
Model: JSTPH-DUPF-4P15CM
A JST-PH to DuPont cable...
€0.80
Ex Tax:€0.66
Model: JSTPH-DUPF-5P15CM
A JST-PH to DuPont cable...
€0.90
Ex Tax:€0.74
Model: JSTPH-DUPF-6P15CM
A JST-PH to DuPont cable...
€1.00
Ex Tax:€0.83
Model: JSTPH-DUPF-7P15CM
A JST-PH to DuPont cable...
€1.10
Ex Tax:€0.91
Model: JSTPH-DUPF-2P15CM
A JST-PH to DuPont cable...
€0.60
Ex Tax:€0.50
Model: JSTSM-EXCABLE3P100CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3 and 4 pins...
€2.50
Ex Tax:€2.07
Model: JSTSM-EXCABLE3P30CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3 and 4 pins...
€2.00
Ex Tax:€1.65
Model: JSTSM-EXCABLE3P50CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3 and 4 pins...
€2.25
Ex Tax:€1.86
JST-SM 3p Compatible Splitter - 2x15cm
2-4 Weeks
Model: JSTSM-SPLITTER3P15CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3 and 4 pins...
€2.50
Ex Tax:€2.07
Model: JSTSM-EXCABLE4P100CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3 and 4 pins...
€2.50
Ex Tax:€2.07
Showing 501 to 550 of 876 (18 Pages)
1
false
true
true
Remove
Change
tr