Menu
Your Cart

Power

Model: 12V1ADCADAPTER
A standard 12V DC adapter with standard 5.5/2.1mm DC jack. Specifications: Output voltage: 12V Maximum output current: 1A Input voltage: 100 - 240V AC 50 ~ 60Hz Maximum input current: 0.4A Cable length: approximately 1.2m Brand: ESPE Type: PRO1212W2E For more information s..
€8.00
Ex Tax:€6.61
Model: 12V2ADCADAPTER
A standard 12V DC adapter with standard 5.5/2.1mm DC jack. Specifications: Voltage (output): 12V Maximum current (output): 2A Voltage (input): 100 - 240V AC 50 ~ 60Hz Maximum current (input): 0.6A Cable length: approximately 1.5m Brand: ESPE Type: PRO2412W2E For more i..
€10.00
Ex Tax:€8.26
Model: 12V3ADCADAPTER
A standard 12V DC adapter with standard 5.5/2.1mm DC jack. Specifications: Input voltage: 12V Maximum output current: 3A Input voltage: 100-240V AC 50~60Hz Length cables: approx. 1.05m Brand: Cellevia Power Type: CLD-3612-T2-EB For more information see the datasheet under the..
€12.00
Ex Tax:€9.92
Model: 18650BATMODV3
This module contains a 1x 18650 battery holder that can be charged with the existing micro USB port, and can supply power with the existing USB-A port. Handy for powering your Arduino, Raspberry Pi, Wemos, etc. In addition to the available USB port, this module also contains 3x 3.3V and 3x 5V connec..
€4.50
Ex Tax:€3.72
Model: 18650-PC2-WCELL
An 18650 battery holder that has separate wires on either side of the battery.  Specifications: Suitable for: 1x 18650 battery Dimensions: 77.5 x 21 x 21.5mm Note: This battery holder is only suitable for standard 18650 cells. The 18650 cells with protection circuit do not&..
€1.50
Ex Tax:€1.24
Model: 1x18650PCBHOL
A 18650 battery holder that has separate pins on each side of the battery. (eg. for on a printed circuit board or other plate) Note 1: The pin positions of this battery holder are not standard and the pins themselves are too thick for the experimental circuit boards. This battery holder is t..
€1.50
Ex Tax:€1.24
Model: 1x18650LEADSHOL
The battery holder can hold a battery so you can have the voltage of a  18650 battery . (approximately 4.2V charged) This battery holder is suitable for standard 18650 cells, also 18650 cells with protection circuit fit in here. Dimensions: 76.5 x 21.5 x 20mm..
€1.00
Ex Tax:€0.83
Model: 1xAALEADSHOL
For example, to connect an AA battery to your Breadboard (approx. 1.5V)..
€0.50
Ex Tax:€0.41
1x AAA Battery Holder with Loose Wires
2-4 Weeks
Model: 1xAAALEADSHOL
A battery holder with loose wires that can be used to connect a battery to, for example, a breadboard or printed circuit board. Specifications: Suitable for: AAA Number of batteries: 1 Package contents: 1x x AAA Battery Holder with Loose Wires..
€0.50
Ex Tax:€0.41
Model: 1xCLEADSHOL
For example, to connect a C battery to your Breadboard (approx. 1.5V)..
€1.00
Ex Tax:€0.83
Model: 1x2032LEADSHOL-LW-SW
A CR2032/LIR2032 battery holder with space for 1 battery. For example, to connect a CR2032 or LIR2032 battery to a breadboard or module. Specifications: Number of batteries: 1 Built-in on/off switch Package contents: 1x 1 CR2032/LIR2032 Battery holder with loose wires and switc..
€1.00
Ex Tax:€0.83
Model: 1xDLEADSHOL
For example, to connect a D battery to your Breadboard (approx. 1.5V)..
€1.50
Ex Tax:€1.24
Model: 18650-PC4-WCELL
An 18650 battery holder that has separate wires on either side of the battery.  Specifications: Suitable for: 2x 18650 battery Dimensions: 77.5 x 40.5 x 21.5mm Note: This battery holder is only suitable for standard 18650 cells. The 18650 cells with protection circuit do no..
€2.00
Ex Tax:€1.65
Model: 2x18650PCBHOL
A 18650 battery holder that has separate pins on each side of the battery. (eg for on a printed circuit board or other plate) Note 1: The pin positions of this battery holder are not standard and the pins themselves are too thick for the experimental circuit boards. This battery holder is th..
€2.50
Ex Tax:€2.07
Model: 2x18650LEADSHOL
The battery holder puts the batteries in series so you get 2x the voltage of a 18650 battery (about 8.4V at a cell voltage of 4.2V) This battery holder is suitable for standard 18650 cells, also 18650 cells with protection circuit fit in here. Dimensions: 76.5 x 41.5 x 20mm..
€1.50
Ex Tax:€1.24
Model: 2xAALEADSBOXSWITCH
For example, to connect two batteries to your Breadboard. The battery holder puts the batteries in series so that you have 2x the voltage of an AA battery (about 3V)..
€1.50
Ex Tax:€1.24
Model: 2xAALEADSHOL
For example, to connect two AA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 2x the voltage of an AA battery (about 3V)..
€0.80
Ex Tax:€0.66
Model: 2xAAALEADSBOXSWITCH
For example, to connect two AAA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 2x the voltage of a AAA battery (about 3V)..
€1.50
Ex Tax:€1.24
Model: 2xAAALEADSHOL
For example, to connect two AAA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 2x the voltage of a AAA battery (about 3V)..
€0.80
Ex Tax:€0.66
Model: 2xCLEADSHOL
For example, to connect two C batteries to your Breadboard. The battery holder puts the batteries in series so that you have twice the voltage of a C battery (about 3V)..
€1.50
Ex Tax:€1.24
Model: 2x2032LEADSHOL-LW-SW
A CR2032/LIR2032 battery holder with space for 2 batteries. For example, to connect two CR2032 or LIR2032 batteries to a breadboard or module. Specifications: Number of batteries: 2 Switching method: Series (Voltages of batteries are added) Built-in on/off switch Package contents: ..
€1.00
Ex Tax:€0.83
Model: 2xDLEADSHOL
For example, to connect two D batteries to your Breadboard. The battery holder puts the batteries in series so that you have twice the voltage of a D battery (about 3V)..
€2.00
Ex Tax:€1.65
Model: 18650-PC6-WCELL
An 18650 battery holder that has separate wires on either side of the battery.  Specifications: Suitable for: 3x 18650 battery Dimensions: 77.5 x 60 x 21.5mm Note: This battery holder is only suitable for standard 18650 cells. The 18650 cells with protection circuit do not&..
€2.50
Ex Tax:€2.07
Model: 3x18650PCBHOL
A 18650 battery holder that has separate pins on each side of the battery. (eg for on a printed circuit board or other plate) Note 1: The pin positions of this battery holder are not standard and the pins themselves are too thick for the experimental circuit boards. This battery holder is th..
€3.50
Ex Tax:€2.89
Model: 3x18650LEADSHOL
The battery holder puts the batteries in series to give you 3x the voltage of a  18650 battery (about 12.6V with a cell voltage of 4.2V) This battery holder is suitable for standard 18650 cells, also 18650 cells with protection circuit fit in here. Dimensions: 76.5 x 61.5 x 20mm..
€2.00
Ex Tax:€1.65
Model: 3xAALEADSBOXSWITCH
For example, to connect three batteries to your Breadboard. The battery holder puts the batteries in series so that you have 3 times the voltage of an AA battery (about 4.5V)..
€1.75
Ex Tax:€1.45
Model: 3xAALEADSHOL
For example, to connect three AA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 3 times the voltage of an AA battery (about 4.5V)..
€1.00
Ex Tax:€0.83
Model: 3xAAALEADSBOXSWITCH
For example, to connect three AAA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 3x the voltage of a AAA battery. (approx 4.5V)..
€1.75
Ex Tax:€1.45
3x AAA Battery Holder with Loose Wires
2-4 Weeks
Model: 3xAAALEADSHOL
A battery holder with loose wires that can be used to connect batteries to, for example, a breadboard or printed circuit board. Specifications: Suitable for: AAA Number of batteries: 3 Connection: Series Package contents: 1x 3x AAA Battery Holder with Loose Wires..
€1.00
Ex Tax:€0.83
Model: 3xCLEADSHOL
For example, to connect three C batteries to your Breadboard. The battery holder puts the batteries in series so that you have 3 times the voltage of a C battery (about 4.5V)..
€2.00
Ex Tax:€1.65
Model: 3xDLEADSHOL
For example, to connect three D batteries to your Breadboard. The battery holder puts the batteries in series so that you have 3 times the voltage of a D battery (about 4.5V)..
€2.50
Ex Tax:€2.07
Model: 18650-PC8-WCELL
An 18650 battery holder that has separate wires on either side of the battery.  Specifications: Suitable for: 4x 18650 battery Dimensions: 77.5 x 79.5 x 21.5mm Note: This battery holder is only suitable for standard 18650 cells. The 18650 cells with protection circuit do no..
€3.00
Ex Tax:€2.48
Model: 4x18650PCBHOL
A 18650 battery holder that has separate pins on each side of the battery. (eg for on a printed circuit board or other plate) Note 1: The pin positions of this battery holder are not standard and the pins themselves are too thick for the experimental circuit boards. This battery holder is th..
€4.50
Ex Tax:€3.72
Model: 4x18650LEADSHOL
The battery holder puts the batteries in series so that you have 4x the voltage of a 18650 battery (about 16.8V at a cell voltage of 4.2V) This battery holder is suitable for standard 18650 cells, also 18650 cells with protection circuit do niot fit in here. Dimensions: 76.5 x 81 x 20..
€2.50
Ex Tax:€2.07
Model: 4xAALEADSBOXSWITCH
For example, to connect four batteries to your Breadboard. The battery holder puts the batteries in series so that you have 4 times the voltage of an AA battery. (approx. 6V)..
€2.00
Ex Tax:€1.65
Model: 4xAALEADSHOL
For example, to connect four AA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 4 times the voltage of an AA battery. (approx. 6.0V)..
€1.50
Ex Tax:€1.24
Model: 4xAAALEADSHOL
To connect four AAA batteries to your Breadboard for example. The battery holder puts the batteries in series so that you have 4x the voltage of a AAA battery. (approx. 6.0V)..
€1.40
Ex Tax:€1.16
Model: 4xCLEADSHOL
For example, to connect four C batteries to your Breadboard. The battery holder puts the batteries in series so that you have 4x the voltage of a C battery. (approx. 6.0V)..
€2.50
Ex Tax:€2.07
Model: 4xDLEADSHOL
For example, to connect four D batteries to your Breadboard. The battery holder puts the batteries in series so that you have 4x the voltage of a D battery (about 6.0V)..
€3.00
Ex Tax:€2.48
Model: 5V2A4.0/1.7DCADAPTER
A standard 5V DC adapter with 4.0/1.7mm DC jack. The DC jack fits all Orange Pi products that have a DC input and is therefore very suitable for the Orange Pi.  Specifications: Voltage (output): 5V Maximum current (output): 2A Voltage (input): 100 - 240V AC 50 ~ 60Hz Maximum cur..
€9.00
Ex Tax:€7.44
Model: 5V2ADCADAPTER
A standard 5V DC adapter with standard 5.5/2.1mm DC jack. Specifications: Voltage (output): 5V Maximum current (output): 2A Voltage (input): 100 - 240V AC 50 ~ 60Hz Maximum current (input): 0.3A Cable length: approximately 1.45m Brand: ESPE Type: ESPE 1005 or similar For mo..
€8.00
Ex Tax:€6.61
Model: 6xAALEADSHOL
For example, to connect six AA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 6x the voltage of an AA battery. (approx. 9V) Dimensions: 93mm x 57mm x 15mm..
€3.00
Ex Tax:€2.48
Model: 8XAADCHOLDBL
For example, to connect eight AA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 8x the voltage of an AA battery (approximately 12V) With this battery holder the batteries are in a double 4xAA setup...
€3.50
Ex Tax:€2.89
Model: 8XAADCBOXSWITCH
For example, to connect eight AA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 8x the voltage of an AA battery (about 12V)..
€4.50
Ex Tax:€3.72
Model: 8xAALEADSBOXSWITCH
For example, to connect eight AA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 8x the voltage of an AA battery (about 12V)..
€4.00
Ex Tax:€3.31
Model: 8xAALEADSHOL
For example, to connect eight AA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 8x the voltage of an AA battery (about 12V) Dimensions: 120 x 57.5 x 16mm..
€3.50
Ex Tax:€2.89
Model: 8xAALEADSHOLDDBL
For example, to connect eight AA batteries to your Breadboard. The battery holder puts the batteries in series so that you have 8x the voltage of an AA battery (approximately 12V) With this battery holder the batteries are in a double 4xAA setup...
€3.50
Ex Tax:€2.89
Model: 9V1ADCADAPTER
A standard 9V DC adapter with standard 5.5/2.1mm DC jack. Specifications: Voltage (output): 9V Maximum current (output): 1A Voltage (input): 100 - 240V AC 50 ~ 60Hz Maximum current (input): 0.6A Cable length: approximately 1.2m Brand: LVSUN Type: LS-PW12-9V1AV For more info..
€8.00
Ex Tax:€6.61
Model: 9VDCBOXSWITCH
A 9V battery box with a DC jack (5.5*2.1mm) and a switch to, for example, connect a 9V battery to your Arduino...
€3.00
Ex Tax:€2.48
Model: 9VLEADSBOXSWITCH
For example, to connect a 9V battery to your Breadboard...
€1.50
Ex Tax:€1.24
Showing 1 to 50 of 221 (5 Pages)
1
false
false
true
Remove
Change
tr