Model: WS-17431
With this ICE Tower Cooler from 52Pi you can provide a Raspberry Pi with active cooling. The heatsink is equipped with a fan that constantly blows air over the heatsink. This ensures that the Raspberry Pi remains lower in temperature than with a..
€22.75
Ex Tax:€18.80
Model: WS-18549
With this ICE Tower Cooler from 52Pi you can provide a Raspberry Pi with active cooling. The heatsink is equipped with a fan that constantly blows air over the heatsink. This ensures that the Raspberry Pi remains lower in temperature than with a..
€22.75
Ex Tax:€18.80
Model: 608ZZ
Closed ball bearing of the type 608ZZ
Specifications:
Inner diameter: 8mm
Outer diameter: 22mm
Thickness: 7mm..
€1.00
Ex Tax:€0.83
Model: 623ZZ
Closed ball bearing type 623ZZ.
Specifications:
Inner diameter: 3mm
Outer diameter: 10mm
Thickness: 4mm..
€1.00
Ex Tax:€0.83
Model: CORKABSNEMA17-3MM
A shock absorber suitable for stepper motors. The shock absorber is made of cork and ensures less transmission of vibrations to the frame.
Specifications:
Suitable for: NEMA 17 stepper motors
Dimensions: 42 x 42 x 3mm
Note: No mountin..
€1.00
Ex Tax:€0.83
Model: FIXEDCOUPLER5-5MM
This fixed motor coupler is suitable for a coupling between two 5mm shafts.
The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: FIXEDCOUPLER5-8MM
This fixed motor coupler is suitable for a coupling between a 5mm shaft and 8mm shaft.
The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: FIXEDCOUPLER8-8MM
This fixed motor coupler is suitable for a coupling between two 8mm shafts.
The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: FLEXCOUPLER5-8MM
This flexible motor coupler is suitable for a coupling between a 5mm shaft and 8mm shaft.
The coupling is 25mm high and 19mm in diameter. There are four screws supplied to mount the coupler...
€2.50
Ex Tax:€2.07
Model: FLEXCOUPLER8-8MM
This flexible motor coupler is suitable for a coupling between two 8mm shafts.
The coupling is 25mm high and 19mm in diameter. There are four screws supplied to mount the coupler...
€2.50
Ex Tax:€2.07
Model: GT2PULLEY16T5MM
This pulley is suitable for GT2 timing belts and motors with an axle of 5mm.
Specifications:
Timing belt type: GT2
Timing belt width (max): 7mm
Number of teeth: 16
Diameter axle: 5mm
Comes with two screws to attach axle..
€2.50
Ex Tax:€2.07
Model: GT2PULLEY20T5MM
This pulley is suitable for GT2 timing belts and motors with an axle of 5mm.
Specifications:
Timing belt type: GT2
Timing belt width (max): 7mm
Number of teeth: 20
Diameter axle: 5mm
Comes with two screws to attach axle..
€2.50
Ex Tax:€2.07
Model: GT2PULLEY20T8MM
This pulley is suitable for GT2 timing belts and motors with an axle of 8mm.
Specifications:
Timing belt type: GT2
Timing belt width (max): 7mm
Number of teeth: 20
Diameter axle: 8mm
Comes with two screws to attach axle..
€2.50
Ex Tax:€2.07
Model: GT2-BELT-110MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 110mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT2
..
€2.50
Ex Tax:€2.07
Model: GT2-BELT-158MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 158mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT2
..
€2.50
Ex Tax:€2.07
Model: GT2TIMINGBELT6MM
This timing belt is suitable for GT2 pulleys with a minimum width of 6mm.
Specifications:
Timing belt type: GT2
Timing belt width: 6mm
Sold per meter with two loose ends
Note: This product may be sold in one meter pieces. If you wan..
€2.00
Ex Tax:€1.65
Model: GT2-BELT-200MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and has a length of 200mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT..
€2.75
Ex Tax:€2.27
Model: GT2-BELT-280MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 280mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT2
..
€2.75
Ex Tax:€2.27
Model: GT2-BELT-300MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 300mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT2
..
€3.00
Ex Tax:€2.48
Model: GT2-BELT-320MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 320mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT2
..
€3.00
Ex Tax:€2.48
Model: GT2-BELT-400MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 400mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT2
..
€3.50
Ex Tax:€2.89
Model: GT2-BELT-610MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 610mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT2
..
€4.00
Ex Tax:€3.31
Model: GT2-BELT-852MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 852mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT2
..
€4.50
Ex Tax:€3.72
Model: GT2316T
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm.
Specifications:
16 Teeth
Inner diameter 3mm
Outer diameter: 13mm
Height: 8.5mm
Suitable for belts of 6mm
See image for the exact dimensions...
€1.50
Ex Tax:€1.24
Model: GT2316S
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm.
Specifications:
Toothless, but has the same diameter as a GT2-16 with 16 teeth pulley
Inner diameter 3mm
Outer diameter: 13mm
Height: 8.5mm
Suitable for ..
€1.50
Ex Tax:€1.24
Model: GT2520T
A GT2 belt pulley with an internal roller bearing and an inner diameter of 5mm.
Specifications:
20 Teeth
Inner diameter 5mm
Outer diameter: 18mm
Height: 8.5mm
Suitable for belts of 6mm
See image for the exact dimensions...
€1.50
Ex Tax:€1.24
Model: GT2320T
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm.
Specifications:
20 Teeth
Inner diameter 3mm
Outer diameter: 18mm
Height: 8.5mm
Suitable for belts of 6mm
See image for the exact dimensions...
€1.50
Ex Tax:€1.24
Model: GT2320S
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm.
Specifications:
Toothless, but has the same diameter as a GT2-20 with 20 teeth pulley
Inner diameter 3mm
Outer diameter: 18mm
Height: 8.5mm
Suitable for ..
€1.50
Ex Tax:€1.24
Model: GT2520S
A GT2 belt pulley with an internal roller bearing and an inner diameter of 5mm.
Specifications:
Toothless, but has the same diameter as a GT2-20 with 20 teeth pulley
Inner diameter 5mm
Outer diameter: 18mm
Height: 8.5mm
Suitable for ..
€1.50
Ex Tax:€1.24
Model: COOL11x11
Suitable for providing small chips with a little air cooling.
Material is aluminum in combination with a black thermally conducting adhesive layer of 3M...
€0.40
Ex Tax:€0.33
Model: HEATSINKLED1-3W
This cooling block is required if you want to use the corresponding 1W to 3W LED at full brightness.
These LEDs produce a lot of heat, which has to be cooled.
The LED can be soldered to the cooling block. Try to place the LED as close to the cool..
€0.20
Ex Tax:€0.17
Model: KFL8
Mounting for rotating 8mm shaft. Used for the Z-axis of a 3D printer or CNC machine.
Specifications:
Dimensions: 48x27x11.2mm
Inner diameter: 8mm
Mounting hole: M5
See images for the exact dimensions...
€2.50
Ex Tax:€2.07
Model: KP08
Mounting for rotating 8mm shaft. Used for the Z-axis of a 3D printer or CNC machine.
Specifications:
Dimensions: 55x30x12mm
Inner diameter: 8mm
Mounting hole: M5
See images for the exact dimensions...
€2.50
Ex Tax:€2.07
Model: LM12LUU
A linear bearing of the LM12LUU type. This linear bearing is used to make the frame stiffer for example Anet A8 and DIY coreXY printers.
Specifications:
Internal diameter: 12mm
External diameter: 21mm
Dimensions: 21x21x57mm
Weight..
€3.50
Ex Tax:€2.89
Model: LM12UU
A linear bearing of the LM12UU type. This linear bearing is used to make the frame stiffer for example Anet A8 and DIY coreXY printers.
Specifications:
Internal diameter: 12mm
External diameter: 21mm
Dimensions: 21x21x30 mm
W..
€2.00
Ex Tax:€1.65
Model: LM6LUU
A linear bearing of the LM6LUU type. These linear bearings are used mostly in small 3D printers.
Specifications:
Internal diameter: 6mm
External diameter: 12mm
Dimensions: 12x12x35mm
Weight: ~12 grams
Note: The linear bearin..
€2.50
Ex Tax:€2.07
Model: LM6UU
A linear bearing of the LM6UU type. These linear bearings are used mostly in small 3D printers.
Specifications:
Internal diameter: 6mm
External diameter: 12mm
Dimensions: 12x12x19 mm
Weight: ~6 grams
Note: The linear bearing..
€1.00
Ex Tax:€0.83
Model: LM8LUU
A linear bearing of the LM8LUU type. These linear bearings are used in many different 3D printers.
Specifications:
Internal diameter: 8mm
External diameter: 15mm
Dimensions: 15x15x45mm
Weight: approx. 26 grams
Note: The linear bea..
€2.50
Ex Tax:€2.07
Model: LM8UU
A linear bearing of the LM8UU type. These linear bearings are used in many 3D printers, including the AnyCubic I3 Mega/Mega-S and the Prusa series.
Specifications:
Internal diameter: 8mm
External diameter: 15mm
Dimensions: 15x15x24..
€1.00
Ex Tax:€0.83
Model: NEO12X5-4MMCS
A strong neodymium magnet with a countersunk mounting hole to securely mount the magnet.
Specifications:
Type of magnet: Neodymium
Materials magnet: Neodymium, Iron and Boron (NdFeB)
Plating material: Nickel
Magnet quality: N33
Maxim..
€1.00
Ex Tax:€0.83
Model: NEO15X5-4MMCS
A strong neodymium magnet with a countersunk mounting hole to securely mount the magnet.
Specifications:
Type of magnet: Neodymium
Materials magnet: Neodymium, Iron and Boron (NdFeB)
Plating material: Nickel
Magnet quality: N33
Maxim..
€1.10
Ex Tax:€0.91
Model: NEO2*10
A standard neodymium magnet for eg. a reed relay. Format is 10mm in diameter and 2 mm in hight.
Note: Neodymium is quite a brittle material, so be careful for hard bounces against magnetic materials...
€0.60
Ex Tax:€0.50
Model: NEO25X2
A super strong neodymium magnet with an adhesive strip on one side for easy mounting.
Specifications:
Type of magnet: Neodymium
Materials magnet: Neodymium, Iron and Boron (NdFeB)
Plating material: Nickel
Magnet quality: N35
Maximum ..
€1.20
Ex Tax:€0.99
Model: NEO8X3-3MMCS
A strong neodymium magnet with a countersunk mounting hole to securely mount the magnet.
Specifications:
Type of magnet: Neodymium
Materials magnet: Neodymium, Iron and Boron (NdFeB)
Plating material: Nickel
Magnet quality: N33
Maxim..
€0.60
Ex Tax:€0.50
Model: TEC1-12706
A Peltier element with wires, this element can be used for heating and cooling purposes. Or can be used to harvest energy from temperature differences. The element has a hot and a cold side.
Note: The hot side needs to be cooled properly to prevent ..
€4.00
Ex Tax:€3.31
Model: RPIHEATSINKKIT
A set of cooling blocks to provide your Raspberry Pi with a little extra cooling.
This set consists of three cooling blocks incl. adhesive layer for easy placement of the cooling blocks.
Specifications:
Material: Aluminum
Dimensions:
..
€0.80
Ex Tax:€0.66
Model: WS-17790
A set of heat sinks to provide your Raspberry Pi with a little extra cooling.
This set consists of three heat sinks with an adhesive layer for easy placement of the cooling blocks.
Dimensions per colored heat sinks (approximately):
..
€1.50
Ex Tax:€1.24
Model: SCS12UU
A linear bearing of the SCS12UU type. This linear bearing has a flat surface with screw holes.
Specifications:
Internal diameter: 12mm
Dimensions: See images
Thread type: M5
Weight: approx. 102 grams
Note: The linear bearings are ..
€3.50
Ex Tax:€2.89
Model: SCS8UU
A linear bearing of the SCS8UU type. This linear bearing has a flat surface with screw holes.
Specifications:
Internal diameter: 8mm
Dimensions: See images
Thread type: M4
Weight: approx. 46 grams
Note: The linear bearings are lub..
€2.50
Ex Tax:€2.07
Model: SERVODISC25T
A standard metal servo disc suitable for usage with MG995/MG996 type servo's(25T).
You can mount four M3 bolts on the disc.(four small bolts included)
The exact dimensions can be found in the images...
€0.50
Ex Tax:€0.41