Model: LILYTINY
Like the Digispark, the LilyTiny has an ATTiny85 with bootloader on board so that you can program via USB.
This lilypad will have enough storage to be able to run relatively simple programs.
The pins are listed on the board. The board can be powere..
€10.50
Ex Tax:€8.68
Model: OL-EDUARDU
An educational open source hardware board from Olimex, based on the ATmega32u4. The board contains various sensors, a joystick, buzzer, servo interfaces, battery charging chip and a LED matrix. The board can be programmed in Arduino IDE as an Arduino..
€18.50
Ex Tax:€15.29
Model: OSRICHUNOR3
This Open-Smart Rich Uno R3 is an extensive Arduino Compatible Uno R3 with various sensors and includes a potentiometer, 4-digit clock display, SD-card reader, DIP switches and MP3 player. With the DIP switches it is possible to switch the signals of..
€18.50
Ex Tax:€15.29
Model: PROMICRO3.3V8M
This Pro Micro 3.3V is based on the open source design of the Arduino Micro and is largely compatible with the SparkFun Pro Micro 3.3V, making it both hardware and software compatible with the Arduino ecosystem. The Pro Micro 3.3V is a very compact b..
€9.75
Ex Tax:€8.06
Model: PROMICRO5V16M
This Pro Micro 5V is based on the open source design of the Arduino Micro and is a copy of the SparkFun Pro Micro 5V, making it both hardware and software compatible with the Arduino ecosystem. The Pro Micro 5V is a very compact board, with an ATmega..
€10.25
Ex Tax:€8.47
Model: PROMICRO5V16MUSBC
This Pro Micro 5V is based on the open source design of the Arduino Micro and is a copy of the SparkFun Pro Micro 5V, making it both hardware and software compatible with the Arduino ecosystem. The Pro Micro 5V is a very compact board, with an ATmega..
€7.00
Ex Tax:€5.79
Model: PROMINI3.3V8M
This Pro Mini 3.3V is based on the open source design of Arduino and is a copy of the SparkFun Pro Mini 3.3V, making it both hardware and software compatible with the Arduino ecosystem. The Pro Mini 3.3V is a very compact board, with an ATmega328P mi..
€7.50
Ex Tax:€6.20
Model: PROMINI5V16M
This Pro Mini 5V is based on the open source design of Arduino and is a copy of the SparkFun Pro Mini 5V, making it both hardware and software compatible with the Arduino ecosystem. The Pro Mini 5V is a very compact board, with an ATmega328P microcon..
€6.00
Ex Tax:€4.96
Model: RFNANOV3.0-NRF24L01
An Arduino Nano compatible board with a built-in NRF24L01 RF module.
Specifications:
Supply voltage:
USB-C: 5V DC
VIN pin: 7-12V DC
GPIO voltage: 5V
Maximum GPIO current: 40mA
Processor: ATmega328
Clock Frequency: ..
€10.25
Ex Tax:€8.47
Model: SEEED-102010268
The Seeeduino Nano is a variant of Seeed Studio on the Arduino Nano. The board is fully compatible with the Arduino Nano, including all shields. In addition, the board also offers the possibility to easily connect other modules via Grove (I2C) connec..
€11.75
Ex Tax:€9.71
Model: SEEED-102010026
The Seeeduino V4.2 is a variant of the Arduino Uno from Seeed Studio. The board is fully compatible with the Arduino Uno, including all shields. In addition, the board also offers the possibility to easily connect other modules via Grove (I2C/UART) c..
€12.00
Ex Tax:€9.92
Model: ARDUNOCH340
TinyTronics now offers a cheap variant for the Uno R3. The differences with a standard Uno R3 are shown in the table below.
Difference
Uno R3
Uno R3 - Compatible - Micro USB
USB aansluiting
USB-B
Micro ..
€7.00
Ex Tax:€5.79