Pro Micro 5V 16MHz - USB-C
- Availability: Directly available from warehouse in Eindhoven
- SKU: 005339
€7.00
Ex Tax: €5.79
Your shopping cart is empty!
This Pro Micro 5V is based on the open source design of the Arduino Micro and is a copy of the SparkFun Pro Micro 5V, making it both hardware and software compatible with the Arduino ecosystem. The Pro Micro 5V is a very compact board, with an ATmega32U4 microcontroller. For example, you can use it as a USB input device (e.g. keyboard and mouse), partly due to its dimensions, the Pro Micro is ideal for this.
If the board registers on the computer as a "Pro Micro" then you still need to download the Board Definitions from Sparkfun for the Arduino IDE: Github sparkfun/Arduino_Boards
You can then select the corresponding type in the Arduino IDE.
Note: The voltage regulator on these Pro Micro compatible boards can only handle a voltage up to 9V DC on the Vin/RAW pin, while the original boards can handle up to 12V. A voltage above 9V DC will cause the voltage regulator to overheat or malfunction.
Note: This Pro Micro might appear as an Arduino Leonardo using a computer, if so select the Arduino Leonardo in the Arduino IDE.
| General | |
| Brand | No brand |
| Features | Microcontroller (MCU) |
| General physical appearance | |
| Main color | Blue |
| Weight [g] | 3 |
| Dimension X [mm] | 35 |
| Dimension Y [mm] | 19 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 (via USB-C or VCC pin) 7 (via RAW pin) |
| Maximum supply voltage [V DC] | 9 (via RAW pin) 5 (via USB-C or VCC pin) |
| Minimum IO-pin input voltage [V] | 5 |
| Maximum IO-pin input voltage [V] | 5 |
| IO-pin output voltage [V] | 5 |
| Maximum IO-pin source current [mA] | 20 |
| Maximum IO-pin sink current [mA] | 20 |
| MCU | |
| Manufacturer | Microchip/Atmel |
| Chip series | ATmega32u4 |
| Maximum clock frequency [MHz] | 16 |
| Number of cores | 1 |
| Internal memory | |
| SRAM [KB] | 2.5 |
| Flash memory [MB] | 0.031 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC I2C PWM SPI USB GPIO USB CDC Native USB |
| Number of IO-pins | 18 |
| Maximum available hardware PWM channels | 5 |
| Maximum available analog input pins (ADC) | 9 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 1 |
| Maximum available hardware I2C interfaces | 1 |
| Maximum available hardware SPI interfaces | 1 |
| USB to serial converter | Integrated into microcontroller |
| Connectors | |
| Power supply connector(s) | USB-C female Through hole solder pin(s) (2.54mm) |
| IO-connector(s) | USB-C female Through hole solder pin(s) (2.54mm) |
| Package contents | |
| Package contents | 1x Pro Micro 2x Male pin headers 12p |