2-4 Weeks
Model: 3-24VBUZ-I
A simple buzzer to eg. indicate errors with an Arduino. With this active buzzer one only has to offer voltage, no frequency. So that's 3 to put 24V on the buzzer, and he then beeps! If you do not have any (for noise) pins anymore, this buzzer probabl..
€1.00
Ex Tax:€0.83
Model: 3-24VBUZ-II
A simple buzzer for an Arduino, for example to indicate errors. With this active buzzer only an input voltage is required, no frequency. When an input voltage of 3-24V is supplied to the buzzer, the buzzer starts making sound.
This buzzer..
€1.00
Ex Tax:€0.83
Model: 5VBUZ
A simple buzzer to for example indicate erros with an Arduino. With this active buzzer you only need to offer a voltage and no frequency. So you just apply 5V to the buzzer and it starts to beep! If you are out of pins (that are meant for sound), tha..
€0.50
Ex Tax:€0.41
Model: 5VBUZMOD
A simple buzzer module to indicate e.g. errors with an Arduino. With this active buzzer one only has to offer a voltage, no frequency.
So put 5V on the buzzer (and I/O to GND), and it will beep! If you don't have any pins (for noise) left over, t..
€1.50
Ex Tax:€1.24
Model: ABX00108
This module has a built-in microcontroller that can be easily controlled via I2C to operate a buzzer. It allows you to generate sound signals, alarms, or simple tones for your projects...
€8.25
Ex Tax:€6.82
Model: BONECONDUCT1W8O
A small 1W Bone Conductor. With this type of speaker, a surface can be turned into a speaker. It is also possible to place the speaker on the skin and hear the sound through the body.
Specifications:
Power: 1W RMS (2W max)
Impedance: 8Ω
..
€5.00
Ex Tax:€4.13
Model: KS0019
A passive buzzer module to indicate errors with an Arduino. This buzzer is passive and needs to be controlled...
€3.00
Ex Tax:€2.48
Model: LILYPADBUZZER
A buzzer especially for LilyPad products.
This is a passive buzzer, so you have to generate a signal yourself with an Arduino to make sound.
..
€3.00
Ex Tax:€2.48
New
Model: M5STACK-A167
Brand: M5Stack
The Voice Pyramid is a base for smart audio applications designed for the M5Stack Atom series, featuring a built-in microphone, speaker, touch controls, and RGB lighting.
Note: This module is not compatible with the Atom Voice (formerly Atom Echo)..
€27.25
Ex Tax:€22.52
Model: M5STACK-U178
Brand: M5Stack
An audio synthesizer with built-in speaker from M5Stack...
€14.25
Ex Tax:€11.78
Model: M5STACK-U055-B
Brand: M5Stack
This is a speaker module for the M5Stick. This module has a built-in MAX98357 amplifier and a small speaker...
€7.25
Ex Tax:€5.99
Model: M5STACK-U055
Brand: M5Stack
This is a speaker module for the M5 Stick. This module has a built-in PAM8303 amplifier and a small speaker.
Specifications:
Input voltage: 5V DC
PAM8303 amplifier (single channel D-class)
Max. power: 3W
Package content:
..
€5.00
Ex Tax:€4.13
Model: 5VBUZMINI
A simple buzzer to for example indicate erros with an Arduino. With this active buzzer you only need to offer a voltage and no frequency. So you just apply 5V to the buzzer and it starts to beep! If you are out of pins (that are meant for sound), tha..
€0.50
Ex Tax:€0.41
Model: 3-12VPASSIVEBUZ
A passive electromagnetic buzzer to indicate errors with an Arduino, for example. This buzzer is passive and must therefore still be controlled. This allows you to control the buzzer with different tones so that you can give different faults with dif..
€0.40
Ex Tax:€0.33
Model: 3-12VPASSIVEBUZ-PCMB-BUZZ
A passive electromagnetic buzzer to, for example, indicate errors with an Arduino. This buzzer is passive and therefore still needs to be controlled. This allows you to control the buzzer with different tones so that you can indicate different errors..
€1.00
Ex Tax:€0.83
Model: PIEZOBUZ20MM
A simple buzzer to indicate errors with an Arduino, for example. This one is very flat. You can solder wires to it and then use it.
Voltage: 1.5-30V (peak-peak maximum)
Diameter: 20mm
Resonance frequency: 3.9±0.3KHz
Resonance resistance: ..
€0.15
Ex Tax:€0.12
Model: PIEZO12MMWIRES
A simple piezo buzzer to indicate errors with an Arduino or to detect vibrations.
This is very flat and has a diameter of 12mm. This piezo is already pre-soldered with approximately 5cm long wires.
Specifications:
Diameter: 12mm
Re..
€0.30
Ex Tax:€0.25
Model: PIEZO20MMWIRES
A simple piezo buzzer to indicate errors with an Arduino or to detect vibrations.
This piezo is very flat and has a diameter of 20mm. This piezo is already pre-soldered with approximately 4cm long wires.
Specifications:
Diameter: 20mm
Res..
€0.40
Ex Tax:€0.33
Model: PIEZO35MMWIRES
A simple piezo buzzer to indicate, for example, errors with an Arduino or to detect vibrations.
This is very flat and has a diameter of 35mm. The piezo is mounted on a round plastic plate of 50mm in diameter for more firmness...
€0.50
Ex Tax:€0.41
Model: PIONEER-TS-A1371F
The Pioneer TS-A1371F is a compact 3-way speaker where everything is combined into one unit. Thanks to its smart design, an integrated woofer, midrange, and high-frequency tweeter work together perfectly. The result is a surprisingly full, balanced, ..
€55.00
Ex Tax:€45.45
Model: PIONEER-TS-A6980F
This A-Series Pioneer speaker features carefully selected materials to enhance bass and treble while delivering Pioneer's Open & Smooth sound concept, all in an easy-to-install package. This high-rated speaker set takes your DIY audio projects to..
€63.25
Ex Tax:€52.27
2-4 Weeks
Model: PIONEER-TS-G1310F
These speakers from Pioneer have a powerful sound with an excellent price-quality ratio. The rigid design is equipped with a number of mounting points so that the speakers are easy to mount in, for example, a DIY project. Thanks to the high sensitivi..
€29.00
Ex Tax:€23.97
Model: SPKR3W4O
A small 3W broadband speaker that will provide more than enough sound for most applications...
€2.00
Ex Tax:€1.65
Model: XLY-C3
A compact passive 10W speaker that provides high audio performance for the majority of uses...
€2.75
Ex Tax:€2.27
New
Model: 78-F282A
A passive midrange 15W speaker that provides high audio performance for the majority of uses...
€5.00
Ex Tax:€4.13
Model: H96
A compact passive 3W broadband speaker that provides more than sufficient audio performance for the majority of uses...
€4.00
Ex Tax:€3.31
Model: 40-17M6-8
A compact passive 1W broadband mini speaker that provides more than sufficient audio performance for the majority of uses...
€1.00
Ex Tax:€0.83
Model: SPK40703W4OHM
A small speaker with a 4070 form factor...
€2.25
Ex Tax:€1.86
Model: SPKRSET-8OHM2W
A small speaker set. The set can be used separately with an amplifier. In addition, this set contains a JST-PH compatible connector to which both speakers are connected. With this, the set can easily be connected to a JST-PH female connector.
Spec..
€3.00
Ex Tax:€2.48
Model: WS-14595
Brand: Waveshare
A small 5W speaker set from Waveshare. The set is made to be used in combination with certain Waveshare screens (see below), but can also be used separately with an amplifier.
Specifications (per speaker):
Rated power: 5W
Impedance: 8Ω
F..
€6.75
Ex Tax:€5.58
Showing 1 to 33 of 33 (1 Pages)