New
Model: DFROBOT-DFR0446
Brand: DFRobot
A Li-ion/Li-Po battery module that can charge the battery and boost the battery voltage to 5V.
Note: DFRobot indicates that this module is rated for 2.5A, this is not the case. This module can be used up to ~2.3A...
€8.00
Ex Tax:€6.61
Model: MH-CD42
This module has a built-in li-ion charge, 5V boost and protection circuit against over and under voltage, over temperature (chip) and short-circuit protection.
Specifications:
Input voltage (Vin): DC 4.5V - 5.5V (5V recommended)
Input curr..
€3.00
Ex Tax:€2.48
Model: LILYGO-H435
The TTGO T-Bat from LilyGO is a handy module with a 18650 battery holder. This module has various inputs for, among other things, a solar panel. The built-in DC-DC converter provides a stable output voltage, for example to power a microcontroller.
..
€5.50
Ex Tax:€4.55
Model: M5STACK-S005
Brand: M5Stack
A power management module from M5Stack including a battery charger and an RTC. The module also has a boost and a buck converter that convert the battery voltage to 5V and 3.3V, respectively. The specifications in the table below refer to the boost co..
€9.50
Ex Tax:€7.85
Model: SEEED-106990290
The Seeed Studio Lipo Rider Plus is a module that charges a Li-Po/Li-ion battery via USB-C. The module has a 5V 2.4A USB-A output. Furthermore, the module has 4 LEDs as a battery indicator and it is possible to mount pin headers. Via the pin headers ..
€6.50
Ex Tax:€5.37
Model: IMAXB6MINI
This iMAX B6mini is a balance charger/discharger with which you can easily charge different types of batteries. It can be connected to your PC via micro USB (micro USB cable not included) to control it and perform firmware upgrades. Multiple cables w..
€34.00
Ex Tax:€28.10
Model: TP4056PROTECT
A li-ion charger with micro-USB connection in combination with a li-ion protection circuit for too high discharge currents or too low a battery voltage.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% ac..
€2.00
Ex Tax:€1.65
Model: TP4056
A fairly simple li-ion charger with mini-USB connection.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% accuracy)
Input voltage: 4.5V-5.5V
Two LED's indicating the status of loading
Mini-USB input..
€1.50
Ex Tax:€1.24
Model: TP4056PROTECTUSB-C
A li-ion charger with USB-C connection in combination with a li-ion protection circuit for too high discharge currents or a low battery voltage.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% accuracy)
..
€2.50
Ex Tax:€2.07
Model: USBDCDC1000LI-ION
A complete DC-DC converter to boost the Li-ion voltage to 5V USB voltage. This module has a built-in li-ion charge and protection circuit against over- and undervoltage, overtemperature (chip) and short-circuit protection.
This is therefore very s..
€2.50
Ex Tax:€2.07
Model: WMD1MBATSHIELD
A shield to power your (Wemos) D1 Mini via a Li-ion/Li-Po battery and also charge it.
The shield has an extra USB connection for charging the Li-ion/Li-Po battery(with JST-PH 2.0mm connector) and can be set to 500mA or 1000mA charging current (see i..
€5.50
Ex Tax:€4.55
Model: XTARMC1
This compact 1x li-ion cell charger has various functions and can easily be connected via USB (computer or USB charger) as power supply.
Specifications:
Compatible with various Li-ion cells from 10440 cells up to 26650 (including a 18650 cel..
€4.50
Ex Tax:€3.72
Showing 1 to 15 of 15 (1 Pages)