LilyGO T-HMI ESP32-S3 - 2.8 inch IPS-TFT Display - met Touchscreen
- Availability: Directly available from warehouse in Eindhoven
- SKU: 005268
€22.00
Ex Tax: €18.18
Your shopping cart is empty!
The LilyGO T-HMI is a micrcocontroller based on an ESP32-S3R8 with a built-in TFT touch display, amongst others. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable not included).
See the following page for more information: GitHub
This product has 0 review(s) in total.
General | |
Brand | LilyGO TTGO |
Manufacturer model/SKU | H605 |
Model revision | V1.1 or V1.2 |
General physical appearance | |
Main color | Black |
Weight [g] | 46 |
Dimension X [mm] | 80 |
Dimension Y [mm] | 51 |
Mounting options | Mounting hole(s) |
Form factor | Module (general) |
General electrical properties | |
Minimum supply voltage [V DC] | 5 |
Maximum supply voltage [V DC] | 5 |
Minimum IO-pin input voltage [V] | 3.3 |
Maximum IO-pin input voltage [V] | 3.3 |
IO-pin output voltage [V] | 3.3 |
Maximum IO-pin source current [mA] | 40 |
Maximum IO-pin sink current [mA] | 28 |
MCU/SoC | |
Manufacturer | Espressif |
Chip series | ESP32-S3 |
Maximum clock frequency [MHz] | 240 |
Number of cores | 2 |
Internal memory | |
SRAM [KB] | 512 |
PSRAM [MB] | 8 |
Flash memory [MB] | 16 |
EEPROM type | Emulated |
Communication | |
Hardware interface(s) | I2C I2S SPI Native USB UART PWM ADC GPIO USB CDC |
Number of IO-pins | 7 |
Maximum available hardware PWM channels | 7 |
Maximum available analog input pins (ADC) | 4 |
Maximum available analog output pins (DAC) | 0 |
Maximum available hardware UART interfaces | 3 |
Maximum available hardware I2C interfaces | 2 |
Maximum available hardware SPI interfaces | 1 |
USB to serial converter | Integrated into microcontroller |
Supported SD card size | Micro SD |
Wireless communication | |
Interface(s) | Wi-Fi Bluetooth |
Wi-Fi chip/SoC | ESP32-S3 |
Wi-Fi frequency [GHz] | 2.4 |
Bluetooth chip/SoC | ESP32-S3 |
Bluetooth version | 5.0 |
Supported Bluetooth standard(s) | LE |
Display | |
Type | TFT |
Driver | ST7789V |
Screen diagonal [inch] | 2.8 |
Number of pixels long side | 320 |
Number of pixels short side | 240 |
Display shape | Rectangular |
Pixel colors | RGB |
Touchscreen | |
Touchscreen controller | XPT2046 |
Touch type | Resistive |
Multi-touch support | No |
Magnetometer | |
Type | Field strength sensor (threshold) (reed relay) |
Battery circuit | |
Battery charger chip/SoC | TP4056 |
Supported battery chemistry | Li-ion Li-Po |
Maximum charging voltage [V] | 4.2 |
Maximum charging current [mA] | 580 |
Adjustable charging current | No |
Protection circuit | No |
Connectors | |
Power supply connector(s) | JST-PH (compatible) male USB-C female |
IO-connector(s) | HY2.0 (Grove) male Through hole solder pin(s) (2.54mm) USB-C female |
Battery connector(s) | JST-PH (compatible) male |
Wi-Fi/Bluetooth antenna connector | Built-in antenna IPEX MHF 1/uFL male (requires modification) |
Package contents | |
Package contents | 1x T-HMI 1x Grove cable 1x Batterij cable 1x Stylus |