Menu
Your Cart

JST Compatible

Model: STPMOTDUPOCABLE100CM
This cable can be used to connect your NEMA17 stepper motor (with 6 pins connection) to your board with stepper drivers. Specifications: Length: 100cm Connection 1: 4 pins Dupont (2.54mm pi..
€2.00
Ex Tax:€1.65
Model: STPMOTJSTCABLE100CM
This cable can be used to connect your NEMA17 stepper motor (with 6 pins connection) to your board with stepper drivers. Specifications: Length: 100cm Connection 1: 4 pins JST-XH (2.50mm pi..
€2.50
Ex Tax:€2.07
Model: STPMOTJSTCABLE10CM
This cable can be used to connect your NEMA17 stepper motor (with 6 pins connection) to your board with stepper drivers. Specifications: Length: ~10cm Connection 1: 4 pins JST-XH (2.50mm pi..
€2.00
Ex Tax:€1.65
Model: STPMOTJSTCABLE15CM
This cable can be used to connect your NEMA17 stepper motor (with 6 pins connection) to your board with stepper drivers. Specifications: Length: ~15cm Connection 1: 4 pins JST-XH (2.50mm pi..
€2.00
Ex Tax:€1.65
Model: STPMOTJSTCABLE30CM
This cable can be used to connect your NEMA17 stepper motor (with 6 pins connection) to your board with stepper drivers. Specifications: Length: 30cm Connection 1: 4 pins JST-XH (2.50mm pin..
€2.00
Ex Tax:€1.65
Cable for Stepper Motor - JST-XH 4p to JST-PH 6p - 60cm
2-4 Weeks
Model: STPMOTJSTCABLE60CM
This cable can be used to connect your NEMA17 stepper motor (with 6 pins connection) to your board with stepper drivers. Specifications: Length: 60cm Connection 1: 4 pins JST-XH (2.50mm pin..
€2.25
Ex Tax:€1.86
Model: STPMOTJSTCABLE20CM
This cable can be used to connect your NEMA17 stepper motor (with 6 pins connection) to your board with stepper drivers. Specifications: Length: ~20cm Connection 1: 4 pins JST-XH (2.50mm pi..
€2.00
Ex Tax:€1.65
Model: JSTPH2.0CABLE2P10CM
This connector is often used to connect li-ion cells to a board. This cable can be connected to your li-ion or li-po battery so that you can connect it to your board. Specifications: Pin dist..
€0.40
Ex Tax:€0.33
Model: 3PJST-PHCABLE30CM
This 3-pin JST-PH audio cable can be used in combination with the TA2024 amplifier we sell. The pin distance of the JST connector is 2mm and the length of the cable is 30cm. Are you looking for a ca..
€1.50
Ex Tax:€1.24
JST-SM 3p Compatible Extension Cable - 100cm
New
Model: JSTSM-EXCABLE3P100CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3..
€2.50
Ex Tax:€2.07
JST-SM 3p Compatible Extension Cable - 30cm
New
Model: JSTSM-EXCABLE3P30CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3..
€2.00
Ex Tax:€1.65
JST-SM 3p Compatible Extension Cable - 50cm
New
Model: JSTSM-EXCABLE3P50CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3..
€2.25
Ex Tax:€1.86
JST-SM 3p Compatible Splitter - 2x20cm
New
Model: JSTSM-SPLITTER3P20CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3..
€2.50
Ex Tax:€2.07
JST-SM 4p Compatible Extension Cable - 100cm
New
Model: JSTSM-EXCABLE4P100CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3..
€2.50
Ex Tax:€2.07
JST-SM 4p Compatible Extension Cable - 30cm
New
Model: JSTSM-EXCABLE4P30CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3..
€2.00
Ex Tax:€1.65
JST-SM 4p Compatible Extension Cable - 50cm
New
Model: JSTSM-EXCABLE4P50CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3..
€2.25
Ex Tax:€1.86
JST-SM 4p Compatible Splitter - 2x15cm
New
Model: JSTSM-SPLITTER4P15CM
A cable with the same type of connector as, for example, the connectors of our LED strips. When using it for LED strips, do note that the colors may not match exactly, and that there are strips with 3..
€2.50
Ex Tax:€2.07
Model: JST-XHCABLE2P20CM
A JST-XH 2-pin connector set. The set consists of a male JST connector for a printed circuit board and a female JST connector with 2 wires of approximately 20 cm. Specifications: Pin distance..
€0.40
Ex Tax:€0.33
JST-XH 2p Compatible Female Connector with Cable
New
Model: JSTXH-FEM-CABLE2P30CM
Specifications: Connector: JST-XH 2p female Pin distance: 2.54mm Cable length: ~30 cm Wire thickness: AWG 26 Package contents: 1x JST-XH Female Connector with Cable - 2 Pin..
€0.50
Ex Tax:€0.41
Model: JSTXH-MALE-CABLE2P30CM
Specifications: Connector: JST-XH 2p male Pin distance: 2.54mm Cable length: ~30 cm Wire thickness: AWG 26 Package contents: JST-XH Male Connector with Cable - 2 Pin..
€0.50
Ex Tax:€0.41
Model: JST-XHCABLE3P20CM
A JST-XH 3-pin connector set. The set consists of a male JST connector for a printed circuit board and a female JST connector with 3 wires of approximately 20 cm. Specifications: Pin distance..
€0.60
Ex Tax:€0.50
Model: JST-XHCABLE4P20CM
A JST-XH 4-pin connector set. The set consists of a male JST connector for a printed circuit board and a female JST connector with 4 wires of approximately 20 cm. Specifications: Pin distance..
€0.80
Ex Tax:€0.66
Model: JST-XHCABLE5P20CM
A JST-XH 5-pin connector set. The set consists of a male JST connector for a printed circuit board and a female JST connector with 5 wires of approximately 20 cm. Specifications: Pin distance..
€1.00
Ex Tax:€0.83
Model: M5STACK-A030
An adapter cable to connect a LEGO® motor to the M5STACK LEGO+ module. Specifications: Length: 10cm Package contents: 1x 10cm LEGO® motor cable Note: This product is ..
€3.50
Ex Tax:€2.89
Model: M5STACK-A030-B
An adapter cable to connect a LEGO® motor to the M5STACK LEGO+ module. Specifications: Length: 20cm Package contents: 1x 20cm LEGO® motor cable Note: This product is ..
€4.00
Ex Tax:€3.31
Model: M5STACK-A030-C
An adapter cable to connect a LEGO® motor to the M5STACK LEGO+ module. Specifications: Length: 30cm Package contents: 1x 30cm LEGO® motor cable Note: This product is ..
€4.50
Ex Tax:€3.72
Model: WM4PI2CCABLE
This cable can be used for Wemos products with a I2C connector...
€1.50
Ex Tax:€1.24
Model: WM10PTFTCABLE
This cable can be used for Wemos products with a TFT connector...
€2.00
Ex Tax:€1.65
Showing 1 to 28 of 28 (1 Pages)
1
false
false
true
Remove
Change
tr