Raspberry Pi 2-3(B) Enclosure - Black - Option for fan

A simple plastic black housing for a Raspberry Pi 2(B) or 3(B) with option for a small fan. (not supplied)

Specifications:

• Option for a small fan
• Screws included
• Studs supplied to prevent slipping
• Can be mounted on a plate/wall with respect to mounting holes
• Cooling holes on the side and bottom for better cooling via the air
• Wide and narrow hole on the side for flatcable, handy in combination with de  Raspberry Pi 40 pins GPIO Extension kit
• Dimensions: 93 x 68 x 34.5mm

8 screws are supplied to close the housing:

• One screw (different from the rest) is meant to screw in the bottom of the housing so that both parts stay on top of each other. In addition, this is also intended to attach a hole of the Raspberry Pi to the housing.
• Four of the screws are intended to attach a fan. Note: The logo of the fan must be on the side of the raspberry pi.
• Three of the screws are used to screw the Raspberry Pi from the inside onto the lower part of the housing

Note: The housing is snapped on the side (with cooling holes). By pressing the corners of the upper part, the housing comes loose.