TA2024 2x15W Audio Amplifier with Cable - Modded

This TA2024 is ideal for box radios and such!
This amplifier has been modded with the known modification (added 4.7K resistors). You can also do this yourself with the default TA2024 amplifier and 4.7K SMD resistors.
The modification of the R2 and R4 resistor causes the input resistance to be reduced. This makes it possible to get the maximum out of the amplifier with devices with a low audio output.
Please note: The modification is done with 4.7K SMD resitors. These are being soldered onto resistors R2 en R4 and are either marked with 472 or 4701. If you see either of these two markings, the modification HAS BEEN done. If you see 203, the modification HAS NOT BEEN done.

Specifications:
- Works with 12V DC ( 12V auto/scooter battery or 3x li-ion cells in series)
- Class-T (Tripath design)
- 0.04% THD+N @ 9W, 4Ohm
- 0.18% IHF-IM @ 1W, 4Ohm
- 6W @ 8Ohm, 0.1% THD+N
- 11W @ 4Ohm, 0.1% THD+N

High power:
- 10W @ 8Ohm, 10% THD+N
- 15W @ 4Ohm, 10% THD+N

Very efficient:
- 88% @ 10W, 8Ohm
- 81% @ 15W, 4Ohm

- Dynamic Range: 102 dB
- Turn-on & turn-off pop suppression
- Protection against high current
- Protection against overheating
- Dimensions: 96mm x 56mm x 23mm

What you get:
1x TA2024 2x15W Amplifier(with/without mod)
1x Cable with a JST-PH connector (you can connect your own 3.5mm jack to this)