M5Stack M5Cardputer Adv - ESP32-S3 Card Sized Computer with 1.14 inch Display
- Availability: Directly available from warehouse in Eindhoven
- SKU: 007565
€33.50
Ex Tax: €27.69
10 or more €33.25
20 or more €33.00
50 or more €32.75
The M5Cardputer Adv from M5Stack is a programmable smart mini-computer powered by the M5StampS3A. This compact device features a built-in 1.14 inch IPS-TFT display, a speaker, a microphone, a 56-key keyboard, and an integrated battery. You can also connect additional modules/sensors to the Grove connector or via the female pin header, like the Cap LoRa-1262. Finally, this module also has an official Claude integration: Claude
This version is based on the M5Stamp-S3A, which has an improved antenna and lower poser consumption than the Stamp-S3.
See the following page for more information: Wiki
Reviews Over M5Stack M5Cardputer Adv - ESP32-S3 Card Sized Computer with 1.14 inch Display
This product has 0 review(s) in total.
Report this review.
Tags:
M5Stamp
, M5Stamp
, M5Stack M5Cardputer Adv - ESP32-S3 Card Sized Computer with 1.14 inch Display
, 007565
, M5Stack
, K132-Adv
, Battery charger
, Display
, Microcontroller (MCU)
, SD-card adapter
, Audio amplifier
, Battery protection circuit
, Enclosure
, Microphone
, Battery
, Speaker/buzzer
, Acceleration sensor
, Gyroscope
, Keyboad/keypad
, Programmable button(s)
, Digital LED(s)
, I2C
, I2S
, SPI
, Native USB
, UART
, PWM
, ADC
, DAC
, GPIO
, USB CDC
, Wi-Fi
, Bluetooth
, IR
Specifications
| General | |
| Brand | M5Stack |
| Manufacturer model/SKU | K132-Adv |
| Norm conformity | CE RoHS |
| Minimum operating temperature [°C] | 0 |
| Maximum operating temperature [°C] | 40 |
| Features | Battery Display Enclosure Gyroscope Microphone Digital LED(s) Keyboad/keypad Speaker/buzzer Audio amplifier Battery charger SD-card adapter Acceleration sensor Microcontroller (MCU) Programmable button(s) Battery protection circuit |
| General physical appearance | |
| Main color | White |
| Weight [g] | 81 |
| Dimension X [mm] | 84 |
| Dimension Y [mm] | 54 |
| Dimension Z [mm] | 20 |
| Mounting options | Magnets Screw thread LEGO (compatible) holes |
| Thread size | M2 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 40 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32-S3 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 2 |
| Internal memory | |
| SRAM [KB] | 512 |
| PSRAM [MB] | 0 |
| Flash memory [MB] | 8 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC DAC I2C I2S PWM SPI GPIO UART USB CDC Native USB |
| Available GPIO pins | 1, 2, 3, 4, 5, 6, 8, 9, 13, 14, 15, 39, 40 |
| Number of IO-pins | 13 |
| Maximum available hardware PWM channels | 13 |
| Maximum available analog input pins (ADC) | 11 |
| DAC chip | ES8311 |
| DAC type | Audio DAC |
| Maximum available analog output pins (DAC) | 1 |
| DAC resolution [bit] | 24 |
| Maximum available hardware UART interfaces | 3 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 2 |
| USB to serial converter | Integrated into microcontroller |
| Supported SD card size | Micro SD |
| Wireless communication | |
| Interface(s) | IR Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32-S3 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32-S3 |
| Bluetooth version | 5.0 |
| Supported Bluetooth standard(s) | LE |
| IR receiver/transmitter | Transmitter |
| Display | |
| Type | IPS |
| Driver | ST7789V2 |
| Screen diagonal [inch] | 1.14 |
| Number of pixels long side | 240 |
| Number of pixels short side | 135 |
| Display shape | Rectangular |
| Pixel colors | RGB |
| Light source | |
| Type | LED |
| LED (driver) chip | WS2812B |
| Light color | RGB |
| Acceleration sensor | |
| Sensor chip/SoC | BMI270 |
| Degrees of freedom (DOF) | 3 |
| Maximum measuring range [±g] | 16 |
| Maximum resolution [bit] | 16 |
| Gyroscope | |
| Sensor chip/SoC | BMI270 |
| Degrees of freedom (DOF) | 3 |
| Maximum measuring range [±°/s] | 2000 |
| Maximum resolution [bit] | 16 |
| Sound sensor | |
| Sensor (chip(s)) | ES8311 MSM381A3729H9BPC |
| Type | Microphone |
| Sensor technology | MEMS |
| Audio amplifier | |
| Amplifier chip | NS4150 |
| Amplifier class | D |
| Number of (normal) channels | 1 |
| Maximum power per (normal) channel [W] | 0.8 (@8Ω) |
| Speaker | |
| Speaker type | Standard |
| Impedance [Ω] | 8 |
| Switch | |
| Switching method | Physical (sensor switch) |
| Switch type | Push |
| Number of channels/gangs | 57 (56x keyboard + 1x boot button) |
| Battery circuit | |
| Battery charger chip/SoC | TP4057 |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 300 |
| Adjustable charging current | No |
| Protection circuit | Yes (in battery) |
| Safety features | Polarity Overcurrent Overvoltage Undervoltage Short circuit |
| Battery | |
| Chemistry | Li-Po |
| Rechargeable | Yes |
| Typical capacity [mAh] | 1750 |
| Maximum cell voltage [V] | 4.2 |
| Connectors | |
| Power supply connector(s) | USB-C female HY2.0 (Grove) male Pin header female (2.54mm) |
| IO-connector(s) | USB-C female HY2.0 (Grove) male Audio jack 3.5mm female Pin header female (2.54mm) |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna |
| Enclosure | |
| Material | Plastic (unknown material) |
| Package contents | |
| Package contents | 1x Cardputer-Adv |