









M5Stack M5Capsule - with integrated M5StampS3 - ESP32-S3
- Availability: Directly available from warehouse in Eindhoven
- SKU: 005701
€24.50
Ex Tax: €20.25
The M5Capsule is a compact, versatile embedded development board with a built-in M5Stamp S3 microcontroller. The board features a built-in battery, buzzer, RTC, SD card adapter and various sensors.
Note: The integrated M5StampS3 cannot be removed.
See the following page for more information: Wiki
Reviews Over M5Stack M5Capsule - with integrated M5StampS3 - ESP32-S3
This product has 0 review(s) in total.
Report this review.
Specifications
General | |
Brand | M5Stack |
Manufacturer model/SKU | K129 |
Features | Battery charger Microcontroller SD-card adapter Battery protection circuit Enclosure RTC Microphone Battery Speaker/buzzer Acceleration sensor Gyroscope Programmable button(s) |
General physical appearance | |
Main color | White |
Weight [g] | 19 |
Dimension X [mm] | 40 |
Dimension Y [mm] | 24 |
Dimension Z [mm] | 16 |
Mounting options | Screw thread Magnets |
Thread size | M3 |
Form factor | Module (general) |
General electrical properties | |
Minimum supply voltage [V DC] | 5 |
Maximum supply voltage [V DC] | 5 |
Minimum IO-pin input voltage [V] | 3.3 |
Maximum IO-pin input voltage [V] | 3.3 |
IO-pin output voltage [V] | 3.3 |
Maximum IO-pin source current [mA] | 40 |
Maximum IO-pin sink current [mA] | 28 |
MCU/SoC | |
Manufacturer | Espressif |
Chip series | ESP32-S3 |
Maximum clock frequency [MHz] | 240 |
Number of cores | 2 |
Internal memory | |
SRAM [KB] | 512 |
PSRAM [MB] | 0 |
Flash memory [MB] | 8 |
EEPROM type | Emulated |
Communication | |
Hardware interface(s) | I2C I2S SPI Native USB UART PWM ADC GPIO USB CDC |
Number of IO-pins | 10 |
Maximum available hardware PWM channels | 8 |
Maximum available analog input pins (ADC) | 7 |
Maximum available analog output pins (DAC) | 0 |
Maximum available hardware UART interfaces | 3 |
Maximum available hardware I2C interfaces | 2 |
Maximum available hardware SPI interfaces | 2 |
USB to serial converter | Integrated into microcontroller |
Supported SD card size | Micro SD |
Wireless communication | |
Interface(s) | Wi-Fi Bluetooth IR |
Wi-Fi chip/SoC | ESP32-S3 |
Wi-Fi frequency [GHz] | 2.4 |
Bluetooth chip/SoC | ESP32-S3 |
Bluetooth version | 5.0 |
Supported Bluetooth standard(s) | LE |
IR receiver/transmitter | Transmitter |
Acceleration sensor | |
Sensor chip/SoC | BMI270 |
Degrees of freedom (DOF) | 3 |
Maximum measuring range [±g] | 16 |
Maximum resolution [bit] | 16 |
Gyroscope | |
Sensor chip/SoC | BMI270 |
Degrees of freedom (DOF) | 3 |
Maximum measuring range [±°/s] | 2000 |
Maximum resolution [bit] | 16 |
Sound sensor | |
Sensor (chip(s)) | SPM1423 |
Type | Microphone |
Sensor technology | MEMS |
Sensitivity [dB] | -22 |
SNR [dB] | 61 |
RTC | |
RTC chip | BM8563 |
Back-up battery/capacitor | None |
Battery circuit | |
Battery charger chip/SoC | TP4057 |
Supported battery chemistry | Li-ion Li-Po |
Maximum charging voltage [V] | 4.2 |
Maximum charging current [mA] | 300 |
Adjustable charging current | No |
Protection circuit | Yes (note: in battery) |
Safety features | Short circuit Overvoltage Overcurrent Polarity Undervoltage |
Battery | |
Chemistry | Li-Po |
Rechargeable | Yes |
Capacity [mAh] | 250 |
Maximum cell voltage [V] | 4.2 |
Connectors | |
Power supply connector(s) | Pin header female (2.54mm) USB-C female |
IO-connector(s) | HY2.0 (Grove) male Pin header female (2.54mm) USB-C female |
Battery connector(s) | Pin header female (2.54mm) |
Wi-Fi/Bluetooth antenna connector | Built-in antenna |
Package contents | |
Package contents | 1x M5Stack M5Capsule |