LilyGO TTGO T5S V2.8 ESP32 - with 2.7 inch E-paper E-ink - 3 Colors

The TTGO T5S V2.8 from LilyGO is a microcontroller based on an ESP32 with a built-in 2.7 inch E-paper E-ink display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).

Specifications:

• Supply voltage: 3.3V DC or 5V DC
• GPIO voltage: 3.3V*
• ESP32 chip (240MHz dual core processor)
  • Flash memory: 4MB
  • SRAM: 520KB
  • Built-in Wi-Fi
  • Built-in Bluetooth
• Built-in 2.7 inch E-paper E-ink display
• 3 Colors pixels: Black, white and red
• Built-in DAC (MAX98357)
• Built-in microphone 
• USB to serial converter: CP2104 or CH9102F (drivers)
• Built-in Li-ion/Li-Po battery charging circuit: TP4054 chip can charge up to 500mA
• 3 Built-in switches + reset switch
• Built-in micro SD card connection
• I2C connector: 5p JST-PH
• I2C cable included
• Battery connector: 2p Molex Picoblade
• Battery cable included
• Dimensions: See images

Package contents:

• 1x TTGO T5S V2.8 with 2.7 inch E-paper - 3 Colors
• 1x Battery cable with 2p Molex Picoblade
• 1x I2C cable 5p JST-PH to 5p dupont

See the following page for more information and to get started with the board: TTGO-T5-Ink-Screen-Series

To program the board with the Arduino IDE, select the 'ESP32 Dev Module' in the board manager.

*Note: The pins on the board are directly connected to the ESP32 chip and are therefore only suitable for 3.3V signals.