Waveshare Overall Evaluation Board - for Raspberry Pi Pico
- Availability: Directly available from warehouse in Eindhoven
- SKU: 004784
€38.00
Ex Tax: €31.41
Your shopping cart is empty!
A very extensive board specially made for the Raspberry Pi Pico. This allows you to test numerous sensors, a display with a touchscreen, DAC and much more.
Note: No Raspberry Pi Pico is included.
See the following page for more information: Wiki
This product has 0 review(s) in total.
| General | |
| Brand | Waveshare |
| Manufacturer model/SKU | |
| Features | Display Gyroscope Touchscreen Light sensor Magnetometer Speaker/buzzer Battery charger SD-card adapter Acceleration sensor |
| General physical appearance | |
| Main color | Blue |
| Weight [g] | 58 |
| Dimension X [mm] | 86 |
| Dimension Y [mm] | 57 |
| Mounting options | Pin headers Screw thread |
| Thread size | M3 |
| Form factor | Module (general) Raspberry Pi Pico layout/shield |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Communication | |
| Hardware interface(s) | DAC I2S SPI UART Digital USB CDC |
| DAC chip | PCM5101A |
| Maximum available analog output pins (DAC) | 2 |
| DAC resolution [bit] | 32 |
| Maximum DAC output voltage [V] | 3.0 |
| USB to serial converter | CP2102 |
| Supported SD card size | Micro SD |
| Display | |
| Type | IPS |
| Driver | ILI9488 |
| Screen diagonal [inch] | 3.5 |
| Number of pixels long side | 480 |
| Number of pixels short side | 320 |
| Pixel colors | RGB |
| Touchscreen | |
| Touchscreen controller | XPT2046 |
| Touch type | Resistive |
| Multi-touch support | No |
| Light sensor | |
| Sensor (chip) | LDR |
| Measurable light | Visible |
| Light sensor type | Light intensity |
| Acceleration sensor | |
| Sensor chip/SoC | ICM-20948 |
| Degrees of freedom (DOF) | 3 |
| Maximum measuring range [±g] | 16 |
| Maximum resolution [bit] | 16 |
| Gyroscope | |
| Sensor chip/SoC | ICM-20948 |
| Degrees of freedom (DOF) | 3 |
| Maximum measuring range [±°/s] | 2000 |
| Maximum resolution [bit] | 16 |
| Magnetometer | |
| Sensor (chip) | ICM-20948 |
| Type | Compass |
| Degrees of freedom (DOF) | 3 |
| Maximum measuring range [mT] | 4.9 |
| Maximum resolution [bit] | 16 |
| Battery circuit | |
| Battery charger chip/SoC | ETA6096 |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 1000 |
| Adjustable charging current | No |
| Protection circuit | No |
| Connectors | |
| Power supply connector(s) | Micro USB female Pin header female (2.54mm) |
| IO-connector(s) | Micro USB female Pin header female (2.54mm) |
| Battery connector(s) | JST-PH (compatible) male |
| Package contents | |
| Package contents | |