Wemos W600-PICO

This Wemos W600-PICO is a W600 based board with Wi-Fi and runs MicroPython. The CH340 USB to serial converter makes it easy to program. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).

Specifications:

• Chipset: W600 (32bit Cortex-M3 80MHz)
  • Flash memory: 1MB
  • Built-in WiFi
• Supply voltage: 3.3V DC or 5V DC
• I/O voltage: 3.3V*
• I/O pins: 15
• 1x SPI interface
• 1x I2C interface
• 1x UART (TX/RX) interface
• Comes with MicroPython firmware
• PCB dimensions: See images

Package contents:

• 1x Wemos W600 Pico
• 1x Male header set

*Note: The pins on the board are directly connected to the W600 chip and are therefore only suitable for 3.3V signals.

The drivers can be found here:

• Windows Driver
• Mac OSX Driver
• Linux Driver
• Android Driver

Note: Users report that the driver for Mac may be unstable on both old and new computers, read this extra link to get it working.   no drivers need to be installed for MacOS Mojave, they are already present.

New to using MicroPython, then start here.

For more information, see this page: W600-PICO

Note: Because Wemos regularly improves its products, it may be that an older version is supplied than the one mentioned in the link above. Moreover, the pictures on our site might show an older version of the product we currently supply. If you want to know which version we currently have in stock, please contact us.