Waveshare ESP32-S3 with 4 inch IPS Display with Touchscreen and IMU
- Availability: Directly available from warehouse in Eindhoven
- SKU: 007784
€32.50
Ex Tax: €26.86
A development board from Waveshare based on a ESP32-S3 microcontroller by Espressif with multiple sensors. Thanks to the built-in USB connector, it is easy to program. Things can be shown on the built-in IPS display and with the touchscreen, an extensive user interface can be created. For extra connectivity, the board has multiple wireless communication interfaces (including Wi-Fi/Bluetooth). Finally, the board has a battery connector where a Li-Po/Li-ion battery (not included) can be connected, which can also be charged via the board.
See the following page for more information: Wiki
Reviews Over Waveshare ESP32-S3 with 4 inch IPS Display with Touchscreen and IMU
This product has 0 review(s) in total.
Report this review.
Tags:
Microcontroller Boards
, With Bluetooth
, Waveshare ESP32-S3 with 4 inch IPS Display with Touchscreen and IMU
, 007784
, Waveshare
, 28154
, Programmable button(s)
, Microcontroller (MCU)
, Acceleration sensor
, SD-card adapter
, Speaker/buzzer
, Battery charger
, Touchscreen
, Gyroscope
, RTC
, Display
, Native USB
, USB CDC
, RS485
, UART
, GPIO
, SPI
, PWM
, I2S
, I2C
, CAN
, ADC
, Bluetooth
, Wi-Fi
Specifications
| General | |
| Brand | Waveshare |
| Manufacturer model/SKU | |
| Model revision | |
| Features | RTC Display Gyroscope Touchscreen Speaker/buzzer Battery charger SD-card adapter Acceleration sensor Microcontroller (MCU) Programmable button(s) |
| General physical appearance | |
| Main color | Black |
| Weight [g] | 79 |
| Dimension X [mm] | 85 |
| Dimension Y [mm] | 85 |
| Mounting options | Screw thread Adhesive layer |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 36 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 40 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32-S3 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 2 |
| Internal memory | |
| SRAM [KB] | 512 |
| PSRAM [MB] | 8 |
| Flash memory [MB] | 16 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC CAN I2C I2S PWM SPI GPIO UART RS485 USB CDC Native USB |
| Available GPIO pins | 7, 15 |
| Number of IO-pins | 2 |
| Maximum available hardware PWM channels | 0 |
| Maximum available analog input pins (ADC) | 0 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 0 |
| Maximum available hardware I2C interfaces | 1 |
| Maximum available hardware SPI interfaces | 0 |
| USB to serial converter | Integrated into microcontroller |
| RS485 chip | SP3485 |
| Number of RS485 channels | 1 |
| CAN bus controller | ESP32-S3 |
| CAN bus tranceiver | TJA1051T |
| Number of CAN bus channels | 1 |
| Supported SD card size | Micro SD |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32-S3 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32-S3 |
| Bluetooth version | 5.0 |
| Supported Bluetooth standard(s) | LE |
| Display | |
| Type | IPS |
| Driver | ST7701 |
| Screen diagonal [inch] | 4 |
| Number of pixels long side | 480 |
| Number of pixels short side | 480 |
| Display shape | Square |
| Pixel colors | RGB |
| Maximum viewing angle [°] | 160 |
| Touchscreen | |
| Touchscreen controller | GT911 |
| Touch type | Capacitive |
| Multi-touch support | Yes |
| Acceleration sensor | |
| Sensor chip/SoC | QMI8658A |
| Degrees of freedom (DOF) | 3 |
| Maximum measuring range [±g] | 16 |
| Maximum resolution [bit] | 16 |
| Gyroscope | |
| Sensor chip/SoC | QMI8658A |
| Degrees of freedom (DOF) | 3 |
| Maximum measuring range [±°/s] | 2048 |
| Maximum resolution [bit] | 16 |
| RTC | |
| RTC chip | PCF85063A |
| Back-up battery/capacitor | Optional |
| Speaker | |
| Speaker type | Buzzer |
| Battery circuit | |
| Battery charger chip/SoC | ETA6098 |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 2000 |
| Adjustable charging current | No |
| Safety features | Overvoltage Temperature |
| Connectors | |
| Power supply connector(s) | USB-C female Detachable block male (EDG-3.5) |
| IO-connector(s) | USB-C female Detachable block male (EDG-3.5) |
| Battery connector(s) | JST-PH (compatible) male |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna |
| Package contents | |
| Package contents | 1x Display module 1x Terminal block for detachable screw terminal |