Waveshare ESP32-S3 Pico Development Board
- Availability: Directly available from warehouse in Eindhoven
- SKU: 005930
€10.00
Ex Tax: €8.26
Your shopping cart is empty!
This microcontroller from Waveshare, based on the ESP32-S3 chip, has the same form factor as the Raspberry Pi Pico. This makes it possible to use this module with most accessories made for the original Pico. What is special about this module is the built-in USB hub and built-in USB to serial converter. This makes the module easy to read serially and at the same time the native USB functionality is available via the same USB port.
See the following page for more information: Wiki
| General | |
| Brand | Waveshare |
| Manufacturer model/SKU | 23803 |
| Features | USB hub Digital LED(s) Microcontroller (MCU) |
| General physical appearance | |
| Main color | Blue |
| Weight [g] | 4 |
| Dimension X [mm] | 51 |
| Dimension Y [mm] | 21 |
| Mounting options | SMT |
| Form factor | Module (general) Raspberry Pi Pico layout/shield |
| General electrical properties | |
| Minimum supply voltage [V DC] | 1.8 |
| Maximum supply voltage [V DC] | 5.5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 40 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32-S3 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 2 |
| Internal memory | |
| SRAM [KB] | 512 |
| PSRAM [MB] | 2 |
| Flash memory [MB] | 16 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC I2C I2S PWM SPI GPIO UART USB CDC Native USB |
| Number of IO-pins | 30 |
| Maximum available hardware PWM channels | 8 |
| Maximum available analog input pins (ADC) | 18 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 3 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 2 |
| USB to serial converter | CH343P |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32-S3 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32-S3 |
| Bluetooth version | 5.0 |
| Supported Bluetooth standard(s) | LE |
| Light source | |
| Type | LED |
| LED (driver) chip | WS2812B |
| Light color | RGB |
| Connectors | |
| Power supply connector(s) | USB-C female Solder pin(s) (SMT) Through hole solder pin(s) (2.54mm) |
| IO-connector(s) | USB-C female Solder pad(s) Solder pin(s) (SMT) Through hole solder pin(s) (2.54mm) |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna |
| Package contents | |
| Package contents | 1x ESP32-S3 Pico |