Smart Panlee WT240-C3SI1 ESP32-C3 - with 2.4 inch IPS Display
- Availability: Directly available from warehouse in Eindhoven
- SKU: 005342
€13.00
Ex Tax: €10.74
This development board is based on an ESP32-C3 and has a display and audio amplifier. The board can be programmed via USB-C, to do so, GPIO9 may need to be connected to GND.
Check the tab "Downloads" for more information and/or downloads.
Reviews Over Smart Panlee WT240-C3SI1 ESP32-C3 - with 2.4 inch IPS Display
This product has 0 review(s) in total.
Report this review.
Datasheet: 005342_WT240-C3SI1-.pdf
Tags:
Microcontroller Boards
, With Bluetooth
, Smart Panlee WT240-C3SI1 ESP32-C3 - with 2.4 inch IPS Display
, 005342
, Smart Panlee
, WT240-C3SI1
, Audio amplifier
, Display
, Microcontroller (MCU)
, GPIO
, I2C
, I2S
, PWM
, SPI
, UART
, USB CDC
, Wi-Fi
, Bluetooth
Specifications
| General | |
| Brand | Smart Panlee (Wireless-tag) |
| Manufacturer model/SKU | WT240-C3SI1 |
| Model revision | V1.2 |
| Features | Display Audio amplifier Microcontroller (MCU) |
| General physical appearance | |
| Main color | Black |
| Weight [g] | 25 |
| Dimension X [mm] | 75 |
| Dimension Y [mm] | 43 |
| Mounting options | Mounting hole(s) |
| Diameter mounting hole(s) [mm] | 3.2 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 40 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32-C3 |
| Maximum clock frequency [MHz] | 160 |
| Number of cores | 1 |
| Internal memory | |
| SRAM [KB] | 400 |
| PSRAM [MB] | 0 |
| Flash memory [MB] | 4 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | I2C I2S PWM SPI GPIO UART USB CDC |
| Number of IO-pins | 5 |
| Maximum available hardware PWM channels | 5 |
| Maximum available analog input pins (ADC) | 0 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 2 |
| Maximum available hardware I2C interfaces | 1 |
| Maximum available hardware SPI interfaces | 1 |
| USB to serial converter | Integrated into microcontroller |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32-C3 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32-C3 |
| Bluetooth version | 5.0 |
| Supported Bluetooth standard(s) | LE |
| Display | |
| Type | IPS |
| Driver | ST7789 |
| Number of pixels long side | 320 |
| Number of pixels short side | 240 |
| Display shape | Rectangular |
| Pixel colors | RGB |
| Audio amplifier | |
| Amplifier chip | NS8002 |
| Number of (normal) channels | 1 |
| Maximum power per (normal) channel [W] | 3.0 (@3Ω) |
| Minimum speaker impedance per (normal) channel [Ω] | 3 |
| Maximum speaker impedance per (normal) channel [Ω] | 8 |
| Connectors | |
| Power supply connector(s) | USB-C female FFC female 10p 1.00mm JST-GH (compatible) male Through hole solder pin(s) (2.54mm) |
| IO-connector(s) | USB-C female FFC female 10p 1.00mm JST-GH (compatible) male Through hole solder pin(s) (2.54mm) |
| Speaker connector(s) | JST-PH (compatible) male |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna |
| Package contents | |
| Package contents | 1x WT240-C3SI1 |