Smart Panlee 1.54 Serial Screen - IPS-TFT Display - ESP32-S2
- Availability: Directly available from warehouse in Eindhoven
- SKU: 005344
€11.00
Ex Tax: €9.09
Your shopping cart is empty!
This development board is an ESP32-S2 based board with Wi-Fi and an IPS display. An external USB to serial converter is required to program the board. In addition, we recommend a Pogo pin test probe for programming: Test probe 6p
Note: The connectors depicted in the datasheet are not correct (different version), for the correct connectors see the images and specifications below. In addition, this module does not have 16MB flash (as according to the datasheet), but 4MB.
Note: No Wi-Fi/Bluethooth antenna is included, this can be ordered separately: 2.4GHz Antenna with uFL
Check the tab "Downloads" for more information and/or downloads.
This product has 0 review(s) in total.
Datasheet: 005344_ZX1D54NE05S-2424Datasheet.pdf
| General | |
| Brand | Smart Panlee |
| Features | Display Microcontroller (MCU) |
| General physical appearance | |
| Main color | Black |
| Weight [g] | 10 |
| Dimension X [mm] | 34 |
| Dimension Y [mm] | 32 |
| Mounting options | Mounting hole(s) |
| Diameter mounting hole(s) [mm] | 2.2 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 3.3 |
| Maximum supply voltage [V DC] | 5 (via JST connector) 3.3 (via through hole solder pins) |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 40 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32-S2 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 1 |
| Internal memory | |
| SRAM [KB] | 320 |
| PSRAM [MB] | 0 |
| Flash memory [MB] | 4 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC DAC I2C I2S PWM SPI GPIO UART |
| Number of IO-pins | 5 |
| Maximum available hardware PWM channels | 5 |
| Maximum available analog input pins (ADC) | 2 |
| Maximum available analog output pins (DAC) | 2 |
| Maximum available hardware UART interfaces | 2 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 1 |
| USB to serial converter | None |
| Wireless communication | |
| Interface(s) | Wi-Fi |
| Wi-Fi chip/SoC | ESP32-S2 |
| Wi-Fi frequency [GHz] | 2.4 |
| Display | |
| Type | LCD |
| Driver | ST7789 |
| Screen diagonal [inch] | 1.54 |
| Number of pixels long side | 240 |
| Number of pixels short side | 240 |
| Display shape | Square |
| Pixel colors | RGB |
| Connectors | |
| Power supply connector(s) | JST-GH (compatible) male Through hole solder pin(s) (2.54mm) |
| IO-connector(s) | JST-GH (compatible) male Through hole solder pin(s) (2.54mm) |
| Wi-Fi/Bluetooth antenna connector | IPEX MHF 1/uFL male |
| Package contents | |
| Package contents | 1x Development board |