Waveshare SIM7600E LTE Cat-1 HAT - for Raspberry Pi

This is a HAT for Raspberry Pi to use different generations of telecommunications. This module supports calling, SMS and data transfer. It is well suited for situations that require high-speed communication with other devices. In addition, the module also supports satellite navigation (GNSS). The HAT is designed for Raspberry, but also works with other microcontrollers such as an Arduino or ESP via the external pin headers.

Specifications:

• Supply voltage: 5V DC (via micro USB or 5V pins)
• Signal voltage: 3.3V or 5V (adjustable with jumper)
• Chipset: SIM7600E
• Communication:
  • USB (e.g. for testing AT commands and for debugging)
    • USB to serial converter: CP2102
  • UART (AT commands):
  • • Baud rate: 300Bd~4MBd (default is 115200Bd)
• Supported telecom frequency bands:
  • 4G (LTE-TDD): B38, B40 and B41
  • 4G (LTE-FDD): B1, B3, B5, B7, B8 and B20
  • 3G (UMTS/HSPA+): B1, B5 and B8
  • 2G (GSM/GPRS/EDGE): 900MHz and 1800MHz
• Maximum transfer speed:
  • 4G:
    • Downlink: 10Mb/s
    • Uplink: 5Mb/s
  • 3G (HSPA+):
    • Downlink: 42Mb/s
    • Uplink: 5.76Mb/s
  • 2G (EDGE):
    • Downlink: 236.8Kb/s
    • Uplink: 236.8Kb/s
  • 2G (GPRS):
    • Downlink: 85.6Kb/s
    • Uplink: 85.6Kb/s
• Sim card format: Standard SIM
• GNSS:
  • Supported systems: GPS, Beidou and GLONASS
  • Maximum Time-To-First-Fix (open air):
    • Cold start: 35s
    • Hot start: 1s
• MicroSD card adapter: Yes
• Antenna:
  • Telecom: External with uFL connector
  • GNSS: External with uFL connector
• Built-in LED indicators: Power and network
• Built-in 3.5mm audio/microphone jack
• HAT for: All Raspberry Pi SBC models
• Dimensions PCB: See Images

Package contents:

• 1x SIM7600E LTE Cat-1 HAT
• 1x Telecom antenna with male SMA connector
• 1x GPS antenna with male SMA connector
• 2x Female SMA to uFl adapter cable
• 1x Micro USB cable (~35cm)
• 1x Micro USB cable (~120cm)
• 1x Mounting material

See the following page for more information: Waveshare SIM7600E LTE Cat-1 HAT.