Waveshare SIM7020E NB-IoT Module - for Raspberry Pi Pico
- Availability: Directly available from warehouse in Eindhoven
- SKU: 004788
€18.00
Ex Tax: €14.88
Your shopping cart is empty!
With this telecom module you can connect your Raspberry Pi Pico to the NB-IoT or CAT-M network. The module also has a built-in battery circuit with a battery included. The battery can be charged via the VBUS pin of the Raspberry Pi Pico. Thanks to the soldering pads, the Pico can be soldered directly (SMD) to the module so that the whole remains compact.
Note: No Raspberry Pi Pico is included.
See the following page for more information: Wiki
This product has 0 review(s) in total.
| General | |
| Brand | Waveshare |
| Manufacturer model/SKU | 19622 |
| Features | Battery Battery charger Battery protection circuit |
| General physical appearance | |
| Main color | Blue |
| Dimension X [mm] | 74 |
| Dimension Y [mm] | 24 |
| Form factor | Module (general) Raspberry Pi Pico layout/shield |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 (lower possible via Li-Po/Li-ion battery) |
| Maximum supply voltage [V DC] | 5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Communication | |
| Hardware interface(s) | UART |
| Supported SIM card size | Nano-SIM |
| Wireless communication | |
| Interface(s) | Telecom |
| Telecom chip/SoC | SIM7020E |
| Supported telecom networks | NB-IoT (LTE CAT NB1) |
| Supported NB-IoT bands | B1, B3, B5, B8, B20, B28 |
| Battery circuit | |
| Battery charger chip/SoC | MCP73831 |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 500 |
| Adjustable charging current | No |
| Protection circuit | Yes (note: in the Li-Po battery, not on the module itself) |
| Safety features | Overcurrent Overvoltage Undervoltage Short circuit |
| Battery | |
| Chemistry | Li-Po |
| Rechargeable | Yes |
| Typical capacity [mAh] | 600 |
| Nominal cell voltage [V] | 3.7 |
| Maximum cell voltage [V] | 4.2 |
| Connectors | |
| Power supply connector(s) | Solder pin(s) (SMT) Through hole solder pin(s) (2.54mm) |
| IO-connector(s) | Solder pin(s) (SMT) Through hole solder pin(s) (2.54mm) |
| Battery connector(s) | JST-PH (compatible) male |
| Telecom antenna connector | IPEX MHF 1/uFL male |
| Package contents | |
| Package contents | 1x SIM7020E module 1x Telecom antenna 1x Li-Po battery 1x Male pin header set 1x Female pin header set |