AzureFilm PETG CF Filament 1.75mm - 1kg - Olive Green
- Availability: Directly available from warehouse in Eindhoven
- SKU: 007965
€25.90
Ex Tax: €21.41
Your shopping cart is empty!
Note: Due to the additives in this filament, standard brass nozzles wear out quickly. We therefore recommend always printing this filament with a hardened steel nozzle (0.4mm or larger).
Note: This product can not be returned if the sealed packaging has been opened.
This product has 0 review(s) in total.
| General | |
| Brand | AzureFilm |
| Manufacturer model/SKU | FGC171-6021 |
| Norm conformity | RoHS |
| General physical appearance | |
| Main color | Green |
| Weight [g] | 1000 |
| Form factor | Filament on AzureFilm refill spool |
| Filament | |
| Material | PETG |
| Color (addition/detail) | Carbon fiber |
| Percentage addition [%] | 10 |
| Diameter [mm] | 1.75 |
| Tolerance diameter [mm] | 0.02 |
| Roundness tolerance [mm] | 0.02 |
| Spool diameter [mm] | 200 |
| Inner diameter spool [mm] | 55 |
| Spool width [mm] | 65 |
| Print settings | |
| Minimum recommended printing temperature [°C] | 240 |
| Maximum recommended printing temperature [°C] | 260 |
| Minimum recommended temperature heated bed [°C] | 60 |
| Maximum recommended temperature heated bed [°C] | 80 |
| Package contents | |
| Package contents | 1x Filament on spool |
The most effective method to unclog a nozzle is a cold pull. Click here for instructions. Sometimes, however, a nozzle can already be unclogged with the help of a thin needle. These are often included with a 3D printer.
Doesn't it work? Then it is best to replace the nozzle.