Polymaker Fiberon ASA-CF08 Filament 1.75mm - 0.5kg - Black
- Availability: Directly available from warehouse in Eindhoven
- SKU: 007394
€19.99
Ex Tax: €16.52
Your shopping cart is empty!
Fiberon ASA-CF08 is an ASA filament with 8% carbon fiber.
Note: Due to the additives in this filament, standard brass nozzles wear out quickly. We therefore recommend always printing this filament with a hardened steel nozzle (0.4mm or larger).
Note: This product can not be returned if the sealed packaging has been opened.
Check the tab "Downloads" for more information and/or downloads.
This product has 1 review(s) in total.
| General | |
| Brand | Polymaker |
| Manufacturer model/SKU | FF02001 |
| Norm conformity | RoHS |
| General physical appearance | |
| Main color | Black |
| Weight [g] | 500 |
| Form factor | Filament on cardboard spool |
| Filament | |
| Material | ASA |
| Color (addition/detail) | Carbon fiber |
| Percentage addition [%] | 8 |
| Diameter [mm] | 1.75 |
| Tolerance diameter [mm] | 0.05 97% is within +/- 0.02 99% is within +/- 0.03 99.9% is within +/- 0.04 |
| Spool diameter [mm] | 200 |
| Inner diameter spool [mm] | 55 |
| Spool width [mm] | 66 |
| Print settings | |
| Minimum recommended printing temperature [°C] | 260 |
| Maximum recommended printing temperature [°C] | 280 |
| Minimum recommended temperature heated bed [°C] | 90 |
| Maximum recommended temperature heated bed [°C] | 100 |
| Package contents | |
| Package contents | 1x Filament on spool |
The most effective method to unclog a nozzle is a cold pull. Click here for instructions. Sometimes, however, a nozzle can already be unclogged with the help of a thin needle. These are often included with a 3D printer.
Doesn't it work? Then it is best to replace the nozzle.