Model: BRASSBRUSH
This brass brush can, for example, be used to clean the hotend of your 3D printer (first warm up the hotend and make sure that no short circuit is made with the thermistor/heater cables).
Specifications:
Brush material: Brass with iron core&..
€1.00
Ex Tax:€0.83
Model: VM-3696L
A handy, multifunctional pliers with a total of 4 different functions.
Specifications:
Built-in crimper:
Suitable cable lugs: Red (0.5-1mm²), blue (1.5-2.5mm²) and yellow (4-6mm²)
Built-in bolt cutter:
Suitable bolts: M2-..
€6.50
Ex Tax:€5.37
Model: VM-VTECT3
A handy tool for crimping bootlace ferrules.
Specifications:
Suitable bootlace ferrules: FCEB, FCEBK, FCEGY, FCER and FCEW
Crimping range:
0.25, 0.5, 0.75, 1.0, 1.5, 2.5mm²
AWG 24, 20, 18, 17, 16 and 14
Length pliers: 145m..
€17.50
Ex Tax:€14.46
Model: SHEARCUTTER170
With this wire cutter you can cut cables or pieces of wire. E.g. to neatly cut off components on your circuit board. Think of the ends of LEDs or chips that protrude after soldering.
Specifications:
Cuts cables up to 18 AWG (1.0mm²)
Only s..
€4.00
Ex Tax:€3.31
Model: VM-VTHCT
A handy tool for crimping, for example, our cable lug connectors. The colors of the cable lug connectors match the colored dots on the crimping tool, so that it is clear what kind of hole should be used for which type of cable lug connector.
Speci..
€20.00
Ex Tax:€16.53
Model: VM-HHEXPRO
A hex key set consisting of 9 hex keys with ball head.
Hex key sizes:
1.5 x 45mm
2 x 50mm
2.5 x 55mm
3 x 60mm
4 x 65mm
5 x 72mm
6 x 90mm
8 x 100mm
10 x 112mm..
€7.50
Ex Tax:€6.20
Model: ICEXTRACTOR
A simple pair of tweezers for removing or inserting chips or other components from or on a PCB.
Specifications:
Width tip: 3.5mm
Length: ~105mm
Package contents:
1x IC Extractor Tweezers..
€1.50
Ex Tax:€1.24
Model: WEICONNO5
This premium automatic stripping tool is suitable for all flexible or sturdy standard cables with a thickness of 0.2 to 6.0 mm2 and has an adjustable length stop from 5 to 12mm. Furthermore, this stripper has an easily accessible side cutter, which ..
€16.50
Ex Tax:€13.64
Model: TUBECUTTER
A very handy tool for neatly cutting the PTFE tubes for, for example, a 3D printer. The maximum diameter of the PTFE tube may be approximately 6mm...
€3.00
Ex Tax:€2.48
Model: VM-HSET20
A screwdriver set consisting of 6 different screwdrivers.
Package contents:
1x Slotted screwdriver (3 x 75mm)
1x Slotted screwdriver (5 x 100mm)
1x Slotted screwdriver (6 x 100mm)
1x Phillips screwdriver (PH0 x 75)
1x Phillips screwd..
€6.00
Ex Tax:€4.96
Model: VM-HSET22
A screwdriver set consisting of 2 different screwdrivers. In addition, this set also includes a voltage detector.
Package contents:
1x Slotted screwdriver (0.8 x 4 x 100mm)
1x Phillips screwdriver (PH1 x 80)
1x Voltage detector 125-250V ..
€5.00
Ex Tax:€4.13
Model: SN-2549
With this crimping tool you can attach Dupont plugs and JST-XH plugs to a cable yourself.
Specifications:
Crimps cables from 28 to 18 AWG (0.1-1.0mm²)
Consists largely of steel with a plastic handle
Smallest crimping jaw is suitable for ..
€20.00
Ex Tax:€16.53
Model: SN-28B
With this crimping tool you can attach your crimp connectors to a cable. DuPont connectors can also be crimped, however the following version is better suitable for that purpose: SN-2549 Crimping tool
Specifications:
Shrink cables from ..
€15.00
Ex Tax:€12.40
Model: VM-HP03N
A diagonal cutting pliers, ideal for cutting cables...
€4.50
Ex Tax:€3.72
Model: VM-HPSET1
A pliers set consisting of 5 different pliers...
€17.50
Ex Tax:€14.46
Model: VM-HSET09N
A screwdriver set consisting of 6 different screwdrivers with a magnetic tip...
€6.50
Ex Tax:€5.37
Model: VM-MEST1
A set with two snap-off knives, one large and one small...
€5.00
Ex Tax:€4.13
Model: VM-EVT03
This voltage tester is the ideal tool for working safely with mains voltage. If you hold a finger on the top and hold the tip against mains voltage, a light will come on...
€1.75
Ex Tax:€1.45
Model: VM-EVT02
This voltage tester is the ideal tool for working safely with mains voltage. If you hold a finger on the top and hold the tip against mains voltage, a light will come on...
€2.25
Ex Tax:€1.86
Model: VM-VTHD0051
A handy multi-tool set for neatly finishing projects.
Note: The color of the tool may differ from the images...
€36.00
Ex Tax:€29.75
Model: VM-VTSET29
A screwdriver set consisting of 6 different screwdrivers...
€5.25
Ex Tax:€4.34
Showing 1 to 22 of 22 (1 Pages)