- Availabilty: Directly available from warehouse in Eindhoven
- Model: JF-XP2015-24V
- SKU: 003809
An electromagnet that you can use, for example, to make a lock. This electromagnet is very simple to use, you simply offer a voltage (see specifications) and the electromagnet turns on, the polarity does not matter. As soon as the voltage is removed again, the electromagnet loses its magnetism. We do recommend using a flyback diode as the magnet works on the basis of a coil. There is a mounting hole on the back of the magnet with which it can be attached.
- Supply voltage: 24V DC
- Coil resistance: ~320Ω
- Maximum holding force (on iron): 2.5kg*
- Thread mounting hole: M3
- Depth mounting hole: 12mm
- Diameter: 20mm
- Height: 15mm
- 1x Electromagnet 2.5kg - 24V DC - JF-XP2015
See the following page for an example project using a similar electromagnet: Box with rfid-reader and electro magnetic lock.
*Note: The maximum holding force can only be achieved when the magnet exerts its force perpendicular to a flat material (iron), with nothing in between. If this is not the case, for example due to a curved surface or coating, the force will be (much) lower than indicated in the specifications.