LilyGO TTGO T-Controller V2.2 ESP32-WROVER - with 0.96 inch OLED Display

The TTGO T-Controller from LilyGO is a microcontroller based on an ESP32 with a built-in 0.96 inch OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).

Specifications:

• Supply voltage: 3.3V DC or 5V DC
• GPIO voltage: 3.3V*
• ESP32 chip (WROVER-B module) (240MHz dual core processor)
  • Flash memory: 4MB
  • PSRAM: 8MB
  • SRAM: 520KB
  • Built-in Wi-Fi
  • Built-in Bluetooth
• Built-in Li-ion/Li-Po battery charging circuit: TP5400 chip can charge up to 740mA
• USB to serial converter: CP2104 or CH9102F (drivers)
• Built-in 1x 18650 battery holder
• Built-in 0.96 inch OLED display
• Built-in 5-way joystick button
• Built-in on/off switch
• Dimensions PCB: See images

Package contents:

• 1x TTGO T-Controller V2.2 ESP32-WROVER
• 1x Male header set

See the following page for more information and to get started with the board: TTGO T-Controller (T18 V2.2)

To program the board with the Arduino IDE, select the 'ESP32 Dev Module' in the board manager.

*Note: The pins on the board are directly connected to the ESP32 chip and are therefore only suitable for 3.3V signals.