Menu
Your Cart
Please note! Due to the busy period around Black Friday, Cyber Monday and Christmas, there is a chance of longer delivery time.

LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306

LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306
LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306
LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306
LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306
LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306
LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306
LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306
LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306
LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306
LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306
LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306
  • Availabilty: Directly available from warehouse in Eindhoven
  • Model: LILYGO-H317-Q103
  • SKU: 002467
€18.50
Ex Tax: €15.29
10 or more €18.25
20 or more €18.00

The TTGO T-Call from LilyGO is a microcontroller based on an ESP32 in combination with an SIM800L GSM GPRS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable not included).

Specifications:

  • Supply voltage: 5V DC (via USB-C) of 3.3V DC (via 3V3 pin)
  • GPIO voltage: 3.3V*
  • Output voltage: 5V DC (via 5V pin)
  • Main chip: ESP32 (WROVER module, 240Mhz dual core processor)
    • Flash memory: 4MB
    • SRAM: 520 kB
    • PSRAM: 8MB
    • Built-in Wi-Fi
    • Built-in Bluetooth
  • USB to serial converter: CP2104 or CH9102F (drivers)
  • Built-in SIM800L GSM GPRS module
  • Built-in Nano SIM card connection
  • Built-in power management chip (IP5306) with Li-ion/Li-Po battery charging circuit (~500mA charging current)
  • Battery connector: 2p JST-PH
  • Dimensions: See images

Package contents:

  • 1x TTGO T-Call SIM800L
  • 1x Male header set
  • 1x Battery cable
  • 1x Antenna with cable

See the following page to get started with the board: TTGO-T-Call-ESP32

To program the board with the Arduino IDE select the 'ESP32 Wrover Module' in the board manager.

*Note: The pins on the board are directly connected to the ESP32 chip and are therefore only suitable for 3.3V signals.

Please login or register to review

Reviews Over LilyGO TTGO T-Call ESP32 - with SIM800L - IP5306

This product has 0 review(s) in total.

If you have a question or problem regarding a product, please contact us by using one of the buttons below.

1
false
true
true
Remove
Change
tr