Menu
Your Cart

LilyGO TTGO T-Beam - LoRa 433MHz - NEO-M8N GPS - ESP32

LilyGO TTGO T-Beam - LoRa 433MHz - NEO-M8N GPS - ESP32
LilyGO TTGO T-Beam - LoRa 433MHz - NEO-M8N GPS - ESP32
LilyGO TTGO T-Beam - LoRa 433MHz - NEO-M8N GPS - ESP32
LilyGO TTGO T-Beam - LoRa 433MHz - NEO-M8N GPS - ESP32
New
LilyGO TTGO T-Beam - LoRa 433MHz - NEO-M8N GPS - ESP32
LilyGO TTGO T-Beam - LoRa 433MHz - NEO-M8N GPS - ESP32
LilyGO TTGO T-Beam - LoRa 433MHz - NEO-M8N GPS - ESP32
LilyGO TTGO T-Beam - LoRa 433MHz - NEO-M8N GPS - ESP32
LilyGO TTGO T-Beam - LoRa 433MHz - NEO-M8N GPS - ESP32
  • Availabilty: Directly available
  • Model: LILYGO-H267
  • SKU: 003626
€28.50
Ex Tax: €23.55

The TTGO T-Beam from LilyGO is a microcontroller based on an ESP32, including a built-in LoRa chip and a GPS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).

Specifications:

  • Supply voltage: 3.3V DC (via 3V3 pin) or 5V DC (via micro USB or 5V pin)
  • GPIO Voltage: 3.3V*
  • Microcontroller:
    • Chip: ESP32-D0WD-Q6
    • Clock frequency: 240MHz
    • Processor cores: 2
    • SRAM: 520KB
    • PSRAM: 8MB
    • Flash memory: 4MB
    • Built-in Wi-Fi
    • Built-in Bluetooth
    • Number of GPIO pins: 17
    • Number of PWM pins: 14
    • Number of analog input pins (ADC): 12
    • Number of analog output pins (DAC): 1
  • USB to serial converter: CP2104 (drivers)
  • LoRa module:
    • Chip: SX1276
    • LoRa frequency: 433MHz
    • Communication: SPI
    • Antenna connector: uFL/IPEX (antenna is included)
  • GPS:
    • Chip: NEO-M8N
    • Communication: UART
    • Baud rate: 9600
    • Antenna connector: uFL/IPEX (antenna is included)
  • Battery circuit:
    • Chip: AXP192
    • Suitable batteries: Li-ion/Li-Po
    • Maximum charging voltage: 4.2V
    • Maximum charging current: 1.4A
    • Protection circuit: Yes
    • UVLO: 2.9V
  • Built-in 1x 18650 battery holder (battery is not included)
  • Built-in push button (GPIO38)
  • Built-in on/off button
  • Dimensions PCB: 100.1 x 32.8mm

Package contents:

  • 1x LilyGO TTGO T-Beam V1.1
  • 1x LoRa antenna 433MHz with SMA connector
  • 1x uFL to SMA cable
  • 1x GPS Antenna with uFL connector
  • 1x Male header set

See the following page for more information and to get started with the board: TTGO T- Beam

In addition, the T-Beam can also be used with the SoftRF software: SoftRF ESP32

To program the board with the Arduino IDE select the 'ESP32 Dev Module' in the board manager.

*Note: The pins on the board are directly connected to the ESP32 chip and are therefore only suitable for 3.3V signals.

Please login or register to review

Reviews Over LilyGO TTGO T-Beam - LoRa 433MHz - NEO-M8N GPS - ESP32

This product has 0 review(s) in total.

1
false
false
true
Remove
Change
tr