Menu
Your Cart

Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU

Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU
Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU
Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU
Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU
New 2-4 Weeks
Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU
Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU
Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU
Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU
Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU
  • Availabilty: 2-4 Weeks
  • Model: WS-22668
  • SKU: 004792
€13.50
Ex Tax: €11.16

A development board from Waveshare based on the RP2040 chip from Raspberry Pi with a round display. In addition, this module also has a built-in Li-ion/Li-Po charging circuit and an IMU (acceleration sensor and gyroscope).

See the following page for more information about this product: Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU

Please login or register to review

Reviews Over Waveshare RP2040-LCD-1.28 Board with 1.28 Inch Round Display and IMU

This product has 0 review(s) in total.

Specifications

General
Brand Waveshare
Manufacturer model/SKU 22668
Features Battery charger
Display
Microcontroller
Acceleration sensor
Gyroscope
General physical appearance
Main color Blue
Weight [g] 9
Dimension X [mm] 40
Dimension Y [mm] 37
Mounting options Pin headers
Form factor Module (general)
General electrical properties
Minimum supply voltage [V DC] 5
(lower possible via Li-ion/Li-Po battery)
Maximum supply voltage [V DC] 5
Minimum IO-pin input voltage [V] 3.3
Maximum IO-pin input voltage [V] 3.3
IO-pin output voltage [V] 3.3
Maximum IO-pin source current [mA] 12
Maximum IO-pin sink current [mA] 12
MCU/SoC
Manufacturer Raspberry Pi
Chip series RP2040
Maximum clock frequency [MHz] 133
Number of cores 2
Internal memory
(S)RAM [KB] 258
(264kB)
PSRAM [MB] 0
Flash memory [MB] 2
EEPROM type Emulated
Communication
Hardware interface(s) I2C
SPI
Native USB
UART
PWM
ADC
GPIO
PIO
USB CDC
Number of IO-pins 30
Maximum available hardware PWM channels 16
Maximum available analog input pins (ADC) 4
Maximum available analog output pins (DAC) 0
Maximum available hardware UART interfaces 2
Maximum available hardware I2C interfaces 2
Maximum available hardware SPI interfaces 2
USB to serial converter Integrated into microcontroller
Display
Type TFT
Driver GC9A01
Screen diagonal [inch] 1.28
Number of pixels long side 240
Number of pixels short side 240
Pixel colors RGB
Acceleration sensor
Sensor chip/SoC QMI8658C
Degrees of freedom (DOF) 3
Maximum measuring range [±g] 16
Maximum resolution [bit] 16
Gyroscope
Sensor chip/SoC QMI8658C
Degrees of freedom (DOF) 3
Maximum measuring range [±°/s] 2048
Maximum resolution [bit] 16
Battery circuit
Battery chip/SoC ETA6096
Supported battery chemistry Li-ion
Li-Po
Maximum charging current [mA] 1000
Maximum charging voltage [V] 4.2
Adjustable charging current No
Protection circuit No
Connectors
Power supply connector(s) USB-C female
Pin header female (1.27mm)
IO-connector(s) USB-C female
Pin header female (1.27mm)
Battery connector(s) Molex Picoblade (compatible) male
Package contents
Package contents 1x Waveshare RP2040-LCD-1.28

If you have a question or problem regarding a product, please contact us by using one of the buttons below.

1
false
true
true
Remove
Change
tr