Model: 3-24VBUZ-I
A simple buzzer to eg. indicate errors with an Arduino. With this active buzzer one only has to offer voltage, no frequency. So that's 3 to put 24V on the buzzer, and he then beeps! If you do not have any (for noise) pins anymore, this buzzer probabl..
€1.00
Ex Tax:€0.83
Model: 3-24VBUZ-II
A simple buzzer for an Arduino, for example to indicate errors. With this active buzzer only an input voltage is required, no frequency. When an input voltage of 3-24V is supplied to the buzzer, the buzzer starts making sound.
This buzzer..
€1.00
Ex Tax:€0.83
Model: 5VBUZ
A simple buzzer to for example indicate erros with an Arduino. With this active buzzer you only need to offer a voltage and no frequency. So you just apply 5V to the buzzer and it starts to beep! If you are out of pins (that are meant for sound), tha..
€0.50
Ex Tax:€0.41
Model: 5VBUZMOD
A simple buzzer module to indicate e.g. errors with an Arduino. With this active buzzer one only has to offer a voltage, no frequency.
So put 5V on the buzzer (and I/O to GND), and it will beep! If you don't have any pins (for noise) left over, t..
€1.50
Ex Tax:€1.24
Model: LILYPADBUZZER
A buzzer especially for LilyPad products.
This is a passive buzzer, so you have to generate a signal yourself with an Arduino to make sound.
..
€3.00
Ex Tax:€2.48
Model: 5VBUZMINI
A simple buzzer to for example indicate erros with an Arduino. With this active buzzer you only need to offer a voltage and no frequency. So you just apply 5V to the buzzer and it starts to beep! If you are out of pins (that are meant for sound), tha..
€0.50
Ex Tax:€0.41
Model: 3-12VPASSIVEBUZ
A passive electromagnetic buzzer to indicate errors with an Arduino, for example. This buzzer is passive and must therefore still be controlled. This allows you to control the buzzer with different tones so that you can give different faults with dif..
€0.40
Ex Tax:€0.33
Model: 3-12VPASSIVEBUZ-PCMB-BUZZ
A passive electromagnetic buzzer to, for example, indicate errors with an Arduino. This buzzer is passive and therefore still needs to be controlled. This allows you to control the buzzer with different tones so that you can indicate different errors..
€1.00
Ex Tax:€0.83
Model: PIEZOBUZ20MM
A simple buzzer to indicate errors with an Arduino, for example. This one is very flat. You can solder wires to it and then use it.
Voltage: 1.5-30V (peak-peak maximum)
Diameter: 20mm
Resonance frequency: 3.9±0.3KHz
Resonance resistance: ..
€0.15
Ex Tax:€0.12
Model: PIEZO12MMWIRES
A simple piezo buzzer to indicate errors with an Arduino or to detect vibrations.
This is very flat and has a diameter of 12mm. This piezo is already pre-soldered with approximately 5cm long wires.
Specifications:
Diameter: 12mm
Re..
€0.30
Ex Tax:€0.25
Model: PIEZO20MMWIRES
A simple piezo buzzer to indicate errors with an Arduino or to detect vibrations.
This piezo is very flat and has a diameter of 20mm. This piezo is already pre-soldered with approximately 4cm long wires.
Specifications:
Diameter: 20mm
Res..
€0.40
Ex Tax:€0.33
Model: PIEZO35MMWIRES
A simple piezo buzzer to indicate, for example, errors with an Arduino or to detect vibrations.
This is very flat and has a diameter of 35mm. The piezo is mounted on a round plastic plate of 50mm in diameter for more firmness...
€0.50
Ex Tax:€0.41
Model: WMD1BUZZERSHIELD
A shield with passive buzzer for the (Wemos) D1 Mini. Pin headers are included. (see image)
Specifications:
Frequency: 1 kHz - 3 kHz
Pinout: (standaard)
D1 Mini
Shield &n..
€3.00
Ex Tax:€2.48
Showing 1 to 15 of 15 (1 Pages)