Model: M5STACK-K014-C
Brand: M5Stack
The BALA2 is a self-balancing robot. The kit consists of an M5Core Gray and the BALA2 base. The BALA2 base consists of two DC motors with wheels, a battery and a number of sensors that make it possible to balance and move on the two wheels. The BALA2..
€65.00
Ex Tax:€53.72
Model: M5STACK-U090
Brand: M5Stack
This is a barometric air pressure sensor module with a Grove connection for M5Stack. The module works via I2C communication.
Specifications:
Sensor: BMP280
Measuring range air pressure: 300-1100hPa
Air pressure resolution: 0.16hPa
..
€6.00
Ex Tax:€4.96
Model: M5STACK-C001-C
Brand: M5Stack
The M5Stack Base BOTTOM Core is the bottom part of the M5Core with an M-Bus and extension pins on the sides of the module. The module also includes a built-in 110mAh battery.
Specifications:
Built-in battery: 110mAh Li-Po
M-BUS
Dimension..
€10.25
Ex Tax:€8.47
Model: M5STACK-C002-B
Brand: M5Stack
The M5Stack Black BOTTOM Core is the bottom part of the M5Core with a built-in Li-Po battery. The pins of the M-bus are broken out on the side.
Specifications:
Built-in 110 mAh, 3.7V Li-Po battery
M-BUS
Dimensions: 54.2 x 54.2 x 12.8mm
..
€7.50
Ex Tax:€6.20
Model: M5STACK-K026
Brand: M5Stack
This is an extensive prototype module for the M5Core with a blank circuit board, power input and mounting options for wall mounting or DIN rails.
This circuit board is specifically intended for the M5Stack Core and can be installed as an extra lay..
€19.00
Ex Tax:€15.70
Model: M5STACK-A068
Brand: M5Stack
This is a battery module for M5Camera. This module adds 400mAh to the battery capacity.
This module can be used together with an M5 Camera module.
Specifications:
Battery type: Li-Po
Capacity: 400mAh
Package content:
1x M5Cam..
€5.00
Ex Tax:€4.13
Model: M5STACK-M002
Brand: M5Stack
A battery module for the M5Core. This battery extension adds 700mAh to the battery capacity of the standard M5Core.
Specifications:
Capacity: 700mAh
Package Contents:
1x M5Stack Battery Module..
€11.50
Ex Tax:€9.50
Model: M5STACK-C001-C2
Brand: M5Stack
The M5Stack Black Bottom Base is the bottom part of the M5Core with a built-in Li-Po battery. The pins of the M5-bus are broken out on the side. Compared to the original Bottom, this new version has a built-in switch to completely turn off the batter..
€9.00
Ex Tax:€7.44
Model: M5STACK-U181
Brand: M5Stack
A motor driver module from M5Stack to control a brushless DC motor (BLDC). The module contains a microcontroller that can be controlled via I2C. The microcontroller in turn controls the motor driver. Both the driver and the motor are powered via the ..
€8.00
Ex Tax:€6.61
Model: M5STACK-A129
Brand: M5Stack
This Stamp S3 Breakout board is an expansion board designed specifically for the M5Stamp S3 with 1.27mm pin headers...
€2.50
Ex Tax:€2.07
Model: M5STACK-A011-B
Brand: M5Stack
The M5Stack BTC Standing Base is a standard for the M5Core. With the standard you provide the M5Core with power. It also has a built-in SHT30 temperature and humidity sensor that works with I2C communication.
Specifications:
Input voltage: 5..
€9.75
Ex Tax:€8.06
Model: M5STACK-M024
Brand: M5Stack
The M5Stack Bus module has extra pins and a prototype circuit board for the M5Core.
Specifications:
30 pins (2x15) for input and output
Circuit board: 200 holes, 2.54 mm pitch
Package Contents:
1x M5 Stack BUS Module..
€6.00
Ex Tax:€4.96
Model: M5STACK-U027
Brand: M5Stack
The Button Unit is a pushbutton module from M5Stack. ..
€3.50
Ex Tax:€2.89
Model: M5STACK-U192
Brand: M5Stack
A module of M5Stack with 8 tactile buttons and digital LEDs. The module contains a microcontroller that reads the button states and controls the digital LEDs. The microcontroller communicates via I2C with an external microcontroller...
€8.50
Ex Tax:€7.02
Model: M5STACK-U191
Brand: M5Stack
A module of M5Stack with 8 switches and digital LEDs. The module contains a microcontroller that reads the switch states and controls the digital LEDs. The microcontroller communicates via I2C with an external microcontroller...
€25.00
Ex Tax:€20.66
Model: M5STACK-A100
Brand: M5Stack
The M5Stack C-Back HAT is a module made for the M5StickC (Plus). The module works via I2C communication with the M5StickC.
Note: M5StickC not included...
€10.00
Ex Tax:€8.26
Model: M5STACK-A113
Brand: M5Stack
A module from M5Stack that makes it possible to connect to the NB-IoT network with an M5StickC (Plus).
Note: No M5StickC is included with this product...
€24.00
Ex Tax:€19.83
Model: M5STACK-U174
Brand: M5Stack
The CamS3 Unit from M5Stack is a compact camera unit based on the ESP32-S3 chipset. The unit features Wi-Fi and Bluetooth, a microphone and a camera. The unit can be expanded with extra storage space via the MicroSD card slot. The unit can be program..
€15.00
Ex Tax:€12.40
Model: M5STACK-U174-B
Brand: M5Stack
The CamS3 Unit from M5Stack is a compact camera unit based on the ESP32-S3 chipset. The unit features Wi-Fi, a microphone and a camera. The unit can be expanded with extra storage space via the MicroSD card slot. The unit can be programmed via the Gr..
€21.00
Ex Tax:€17.36
Model: M5STACK-U085
Brand: M5Stack
This is a CANBus module with a HY2.0 4P (Grove) connection for M5Stack. The module works via UART communication.
Specifications:
CAN Bus chip: CA-IS3050G
Maximum number of bus nodes: 110
Maximum transfer speed: 1Mbps
Se..
€14.50
Ex Tax:€11.98
Model: M5STACK-U077
Brand: M5Stack
The M5Stack CardKB Hat is a keyboard module for the M5StickC*.
Specifications:
I2C communication
I2C address: 0x5F
Multi-key support
Designed for use with the M5StickC*
Package contents:
1x CardKB Hat
*Note: The M5Stic..
€6.50
Ex Tax:€5.37
Model: M5STACK-U035
Brand: M5Stack
The M5Stack CardKB Unit is a keyboard module with a Grove connection for M5Stack. The module works via I2C communication.
Specifications:
I2C communication
I2C address: 0x5F
Multi-key support
2x LEGO® compatible holes
1x Grove connec..
€6.50
Ex Tax:€5.37
Model: M5STACK-U102
Brand: M5Stack
The Catch Unit is a robotic gripper from M5Stack. With a single servo and a gear mechanism, both arms of the gripper are moved. The unit has several places with which it can be attached to LEGO®.
Specifications:
Supply voltage: 4.2-6V DC
S..
€8.50
Ex Tax:€7.02
Model: M5STACK-A155
Brand: M5Stack
Connector for modular linking of Chain products and Puzzle Unit from M5Stack...
€7.25
Ex Tax:€5.99
Model: M5STACK-U211
Brand: M5Stack
The mount brick module from M5Stack is a structural expansion for the modular chain system...
€5.75
Ex Tax:€4.75
Model: M5STACK-U210
Brand: M5Stack
A module from M5Stack with a prototype board for the modular chain system...
€5.75
Ex Tax:€4.75
Model: M5STACK-A154
Brand: M5Stack
Connector for modular linking of Chain products and Unit Puzzle from M5Stack...
€7.25
Ex Tax:€5.99
Model: M5STACK-U207
Brand: M5Stack
A module from M5Stack with a rotary encoder and an RGB LED for the modular chain system...
€8.25
Ex Tax:€6.82
Model: M5STACK-U209
Brand: M5Stack
A module from M5Stack with a Time-of-Flight ToF distance sensor for the modular chain system...
€10.50
Ex Tax:€8.68
Model: M5STACK-A148-A
Brand: M5Stack
The Clip-A from M5Stack is a versatile kit specially designed for M5Stack products such as, the Unit-Puzzle, StickC PLUS and AtomS3R CAM. The kit supports various mounting options due to the included clip, cable tie, rail, magnetic and wall mounts...
€2.50
Ex Tax:€2.07
Model: M5STACK-A148-B
Brand: M5Stack
The Clip-B from M5Stack is a versatile mounting kit for LEGO specially designed for M5Stack products such as, the Unit-Puzzle, StickC PLUS and AtomS3R CAM. With LEGO-compatible parts and a GoPro mount, the Clip-B can be used for various creative and ..
€2.50
Ex Tax:€2.07
Model: M5STACK-K127-EU
Brand: M5Stack
The CM4STAC is the Ultimate Integrated Microcontroller with Raspberry Pi CM4...
€224.25
Ex Tax:€185.33
Model: M5STACK-U103
Brand: M5Stack
A CO2 sensor, humidity sensor and a temperature sensor in one of M5Stack...
€39.00
Ex Tax:€32.23
Model: M5STACK-U104
Brand: M5Stack
A CO2 sensor, humidity sensor and a temperature sensor in one of M5Stack...
€51.00
Ex Tax:€42.15
Model: M5STACK-U120
Brand: M5Stack
This Color LCD Unit is a display module from M5Stack. The module contains a separate microcontroller that controls the display. This microcontroller can then be controlled via I2C in order to control the display. The software of the microcontroller c..
€18.75
Ex Tax:€15.50
Model: M5STACK-U009
Brand: M5Stack
The M5Stack Color Unit is an RGB color sensor module for M5Stack. The module works via I2C communication.
Specifications:
Sensor: TCS3472
I2C address: 0x29
2x LEGO® holes for mounting
Grove connection
Package contents:
1x Co..
€13.00
Ex Tax:€10.74
Model: M5STACK-M031-G
Brand: M5Stack
This is a GPS module from M5Stack that is suitable for use with the M5Core. This module is based on a u-blox NEO-M8N with high sensitivity and fast acquisition.
Specifications:
Supported GNSS (navigation) networks:
BeiDou
Gali..
€41.25
Ex Tax:€34.09
Model: M5STACK-M031-D
Brand: M5Stack
This is a stackable extension module for the M5Core for the use of GSM 2G communication. For example, send SMS texts using this module. A big advantage of the COM GSM is that it has an extremely low power consumption.
Specifications:
Stackab..
€19.00
Ex Tax:€15.70