LilyGO T-SIMCAM ESP32-S3 - met OV5640 Camera
- Beschikbaarheid: Direct leverbaar uit magazijn in Eindhoven
- SKU: 005373
€23,50
Excl. BTW: €19,42
Je winkelwagen is leeg!
De TTGO T-SIMCAM van LilyGO is een microcontroller met camera. Het board heeft een USB-C aansluiting waarmee hij geprogrammeerd en/of gevoed kan worden (USB-C kabel niet meegeleverd). Ook heeft het board een handig PCIe slot waarvoor verschillende uitbreidingsmodules beschikbaar zijn: LilyGO T-PCIE
Let op: Het PCIe slot is alleen compatible met TTGO PCIE modules.
Let op: De grove connector heeft niet de standaard pinout zoals producten van M5Stack en Seeed Studio.
Zie de volgende pagina voor meer informatie: GitHub
Dit product heeft in totaal 0 beoordeling(en).
Algemeen | |
Merk | LilyGO TTGO |
Fabrikant model/SKU | H601 |
Features | Batterijlader Camera Microcontroller SD-kaart adapter Microfoon Programmeerbare knop(pen) |
Algemene fysieke kenmerken | |
Hoofdkleur | Zwart |
Gewicht [g] | 16 |
Afmeting X [mm] | 78 |
Afmeting Y [mm] | 36 |
Vormfactor | Module (algemeen) |
Algemene electrische eigenschappen | |
Minimale voedingsspanning [V DC] | 5 |
Maximale voedingsspanning [V DC] | 5 |
Minimale IO-pin ingangsspanning [V] | 3.3 |
Maximale IO-pin ingangsspanning [V] | 3.3 |
IO-pin uitgangsspanning [V] | 3.3 |
Maximale IO-pin source stroom [mA] | 40 |
Maximale IO-pin sink stroom [mA] | 28 |
MCU/SoC | |
Fabrikant | Espressif |
Chipserie | ESP32-S3 |
Maximale klokfrequentie [MHz] | 240 |
Aantal cores | 2 |
Intern geheugen | |
SRAM [KB] | 512 |
PSRAM [MB] | 8 |
Flash geheugen [MB] | 16 |
EEPROM type | Geëmuleerd |
Communicatie | |
Hardware interface(s) | I2C I2S SPI Native USB UART PWM GPIO USB CDC |
Aantal IO-pinnen | 6 (enkel Grove en through hole pinnen, maar let op: de through hole pinnen conflicteren met de PCIE pinnen) |
Maximaal beschikbare hardware PWM kanalen | 6 |
Maximaal beschikbare analoge ingangspinnen (ADC) | 0 |
Maximaal beschikbare analoge uitgangspinnen (DAC) | 0 |
Maximaal beschikbare hardware UART interfaces | 3 |
Maximaal beschikbare hardware I2C interfaces | 2 |
Maximaal beschikbare hardware SPI interfaces | 1 |
Ondersteund SD-kaart formaat | Micro SD |
Ondersteund SIM kaart formaat | Nano-SIM (let op: er is een extra PCIE module nodig om hier gebruik van te kunnen maken) |
Draadloze communicatie | |
Interface(s) | Wi-Fi Bluetooth |
Wi-Fi chip/SoC | ESP32-S3 |
Wi-Fi frequentie [GHz] | 2.4 |
Bluetooth chip/SoC | ESP32-S3 |
Bluetooth versie | 5.0 |
Ondersteunde Bluetooth standaard(en) | LE |
Scanner/camera | |
Type | Camera |
Sensor(chip) | OV5640 |
Lens type | Normaal |
Aantal pixels lange kant | 2592 |
Aantal pixels korte kant | 1944 |
Geluidsensor | |
Sensor(chip(s)) | MSM261S4030H0R |
Type | Microfoon |
Batterijcircuit | |
Batterij laadchip/SoC | TP4056 |
Ondersteunde batterij chemie | Li-ion Li-Po |
Maximale laadspanning [V] | 4.2 |
Maximale laadstroom [mA] | 580 |
Instelbare laadstroom | Nee |
Protectiecircuit | Nee |
Connectoren | |
Voedingsconnector(en) | USB-C female |
IO-connector(en) | HY2.0 (Grove) male Through hole soldeerpin(nen) (2.54mm) USB-C female Mini PCIe female |
Batterijconnector(en) | JST-PH (compatible) male |
Wi-Fi/Bluetooth antenneconnector | Ingebouwde antenne IPEX MHF 1/uFL male (vereist modificatie) |
Inhoud verpakking | |
Inhoud verpakking | 1x T-SIMCAM 1x Batterij aansluitkabel 1x Male pinheaders 2x Montageschroef voor PCIE module |