Menu
Your Cart

Tools and Mounting

Model: DUPONTCLIPBLACK
This is widely used when you want to measure on the pins of a component. You can connect this clip to a female dupont plug. Almost indispensable in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
Model: DUPONTCLIPBLUE
This is widely used when you want to measure on the legs of a component. You can connect this clip to a female dupont plug. Almost essential in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
Model: DUPONTCLIPGREEN
This is widely used when you want to measure on the legs of a component. You can connect this clip to a female dupont plug. Almost essential in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
Model: DUPONTCLIPRED
This is widely used when you want to measure on the legs of a component. You can connect this clip to a female dupont plug. Almost essential in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
Model: DUPONTCLIPWHITE
This is widely used when you want to measure on the legs of a component. You can connect this clip to a female dupont plug. Almost essential in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
Model: DUPONTCLIPYELLOW
This is widely used when you want to measure on the legs of a component. You can connect this clip to a female dupont plug. Almost essential in combination with the Logic Analyzer - 8 channel - USB...
€0.80
Ex Tax:€0.66
Model: VM-3696L
A handy, multifunctional pliers with a total of 4 different functions. Specifications: Built-in crimper: Suitable cable lugs: Red (0.5-1mm²), blue (1.5-2.5mm²) and yellow (4-6mm²) Built-in bolt cutter: Suitable bolts: M2-..
€6.50
Ex Tax:€5.37
Model: VM-VTECT3
A handy tool for crimping bootlace ferrules. Specifications: Suitable bootlace ferrules: FCEB, FCEBK, FCEGY, FCER and FCEW Crimping range: 0.25, 0.5, 0.75, 1.0, 1.5, 2.5mm² AWG 24, 20, 18, 17, 16 and 14 Length pliers: 145m..
€17.50
Ex Tax:€14.46
Model: CURVOLTMETER10A
Simply connect to the cables whose voltage is to be measured. Voltage range: 7V-100VDC Power range: 0-10ADC Installation dimensions: 46x27mm Maximum thickness of mounting material: 3mm Recommended installation thickness: 2mm Note: If the th..
€6.00
Ex Tax:€4.96
Cutting pliers Type 170
2-4 Weeks
Model: SHEARCUTTER170
With this wire cutter you can cut cables or pieces of wire. E.g. to neatly cut off components on your circuit board. Think of the ends of LEDs or chips that protrude after soldering. Specifications: Cuts cables up to 18 AWG (1.0mm²) Only s..
€4.00
Ex Tax:€3.31
Model: DESOLPUMP
Desoldering pump with teflon nozzle, made of ABS and aluminum. Length: 190mm..
€4.00
Ex Tax:€3.31
Model: DESOLDERWIRE1MM
1mm wide solder ribbon for removing solder. The desoldering ribbon "absorbs" the soldering tin. Comes on a handy bobbin...
€2.00
Ex Tax:€1.65
Model: DESOLDERWIRE2MM
2mm wide solder ribbon for removing solder. The desoldering ribbon "absorbs" the soldering tin. Comes on a handy bobbin...
€2.00
Ex Tax:€1.65
Model: DESOLDERWIRE3MM
3mm wide solder ribbon for removing solder. The desoldering ribbon absorbs the soldering tin. Comes on a handy bobbin...
€2.00
Ex Tax:€1.65
Model: DEVBOARDEPS32WROVER
This is a development board for the ESP32-WROVER WiFi module. The ESP32-WROVER can easily be connected to this. With the help of this board, the WiFi module can be controlled and programmed without having to solder. This board uses a CP210..
€9.50
Ex Tax:€7.85
Model: DEVBOARD-ESP8266
This is a development board for ESP8266 Wi-Fi modules. Using this board, the Wi-Fi module can be controlled and programmed without soldering. Specifications: Compatible ESP boards: ESP-01, ESP-01S, ESP-07, ESP-07S, ESP-12E, ESP-12F, ESP-12S ..
€10.50
Ex Tax:€8.68
Model: DDADHESIVE Brand: Devil Design
This adhesive for your 3D printer is easy to apply to your print bed and prevents loose prints. It is suitable for almost all materials, including ABS and ASA. When the print bed has cooled down, the print can be easily removed with a spatula/putt..
€9.00
Ex Tax:€7.44
Model: DFROBOT-FIT0647 Brand: DFRobot
A silicone case for the DFRobot HuskyLens: DFRobot Gravity HuskyLens - AI Camera - Vision Sensor..
€4.50
Ex Tax:€3.72
Model: CASE100x68x40MM
See images for the outer dimensions. Material is ABS plastic. Inside dimensions: 93 x 61 x 31 mm (without legs on the inside), 93 x 61 x 25 mm (with legs on the inside) Note: The inner dimensions are based on the dimensions in the middle. Inside,..
€3.50
Ex Tax:€2.89
Model: CASE100x68x40MMTR
See images for the outer dimensions. Material is ABS plastic. Inside dimensions: 93 x 61 x 31 mm (without legs on the inside), 93 x 61 x 25 mm (with legs on the inside) Note: The inner dimensions are based on the dimensions in the middle. Inside,..
€4.00
Ex Tax:€3.31
Model: CASE65x38x22MM
Specifications: Inner dimensions: 61 x 34 x 18mm (without legs on the inside), 61 x 34 x 13mm (with legs on the inside) Outer dimensions: see image Material: ABS The case must be opened carefully to prevent the legs from breaking. This..
€2.00
Ex Tax:€1.65
Model: CASE92x57x31MM
See images for the outer dimensions. Material is ABS plastic. Inside dimensions: 86 x 52 x 25mm (without legs on the inside),  86 x 52 x 21mm (with legs on the inside) Note: This type of housing may be slightly damaged on the top and botto..
€2.50
Ex Tax:€2.07
Model: 3.5RPITFTCASE
This housing is suitable for the Raspberry Pi 2 and 3 in combination with the 3.5 inch TFT Display 320*480 pixels with Touchscreen - Raspberry Pi Compatible. Bolts, nuts and plastic rings are supplied with the housing. The housing can easily be p..
€3.00
Ex Tax:€2.48
Model: 5RPILCDCASE
This housing is suitable for the Raspberry Pi B, 2(B) and 3(B) in combination with the 5 inch LCD Display 800*480 pixels with Touchscreen - Raspberry Pi Compatible. Bolts and nuts are supplied with the housing. A piece of plastic is also supplied..
€12.00
Ex Tax:€9.92
Model: XH-WH1209-CASE
A housing suitable for the XH-W1209 Digital Thermostat. This gives your Thermostat extra protection and a nicer finish. Specifications: Dimensions: 60x50x14mm Supplied including screws, nuts and plastic washers Note: The XH-W1209 Dig..
€2.00
Ex Tax:€1.65
Model: ESP8266-12-BOARD
A handy breakout board for ESP-07 and ESP-12 with a built-in pull-down resistor on GPIO15 and a pull-up resistor on the EN-pin. The breakout board also has the option of soldering a voltage regulator on it, so that the ESP module can also b..
€1.50
Ex Tax:€1.24
Model: I2CDRIVER
The I2CDriver from Excamera is a tool to easily read out and control I2C devices via USB (micro USB cable not included). The board works with Windows, Mac and Linux. The board also has a built-in display that shows all I2C activity. Specifications..
€34.00
Ex Tax:€28.10
Model: SPIDRIVER
The Excamera SPIDriver is a tool to easily read and control SPI devices via USB (micro USB cable not included). The board works with Windows, Mac and Linux. The board also has a built-in display that shows all SPI activity. Specifications: 2..
€32.00
Ex Tax:€26.45
Model: PCB15x20DUBHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture). Note: Due to the production process, some copper splinters may occur..
€3.50
Ex Tax:€2.89
Model: PCB2x8DUB
An experimental circuit board for placing and soldering components.   This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects!   Distance between holes: 2.54mm (default) Diameter holes..
€0.60
Ex Tax:€0.50
Model: PCB4x6DUB
An experimental circuit board for placing and soldering components.   This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects!   Distance between holes: 2.54mm (default) Diameter holes..
€0.70
Ex Tax:€0.58
Model: PCB5x7
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 5 x 7cm Note: This circuit board may be a bit crooked/hollow...
€0.60
Ex Tax:€0.50
Model: PCB5x7DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 5 x 7cm Note: Th..
€0.65
Ex Tax:€0.54
Model: PCB5x7DUB
An experimental circuit board to place and solder components on. This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects! Specifications: Color PCB: Green PCB type: Double sided Distance..
€0.80
Ex Tax:€0.66
Model: PCB5x7DIVERSELANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has several lanes and islands. (see image) Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 5 x 7cm ..
€0.65
Ex Tax:€0.54
Model: PCB6.5x14.5
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 6.5 x 14.5cm Note: This circuit board may be a bit crooked/ho..
€0.90
Ex Tax:€0.74
Model: PCB6.5x14.5LANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has lanes over the entire length (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 6.5 x 1..
€2.00
Ex Tax:€1.65
Model: PCB7x9
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 7 x 9cm Note: This circuit board may be a bit crooked/hollow...
€1.00
Ex Tax:€0.83
Model: PCB7x9DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 7 x 9cm Note: Th..
€0.65
Ex Tax:€0.54
Model: PCB7x9DUBHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture). Note: Due to the production process, some copper splinters may occur..
€2.00
Ex Tax:€1.65
Model: PCB7x9DUB
An experimental circuit board for placing and soldering components. This variant is double-sided and can be soldered from both sides. Ideal for small hobby projects! Distance between holes: 2.54mm (default) Diameter holes: 1mm    ..
€1.50
Ex Tax:€1.24
Model: PCB7x9ENK
An experimental PCB for placing and soldering components.   This variant is single-sided and can therefore be soldered from both sides. Ideal for small hobby projects!   Distance between holes: 2.54mm (default) Diameter holes: 1mm..
€1.50
Ex Tax:€1.24
Model: PCB9.5X9.5DUBACCESS
An experimental circuit board for placing and soldering components. This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects! Specifications: Distance between holes: 2.54mm (default) Diamet..
€4.00
Ex Tax:€3.31
Model: PCB9x15
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 9 x 15cm Note: This circuit board may be a bit crooked/hollow..
€2.00
Ex Tax:€1.65
Model: PCB9x15DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 9 x 15cm Note: T..
€2.50
Ex Tax:€2.07
Experiment PCB 9cm*15cm - Double sided
2-4 Weeks
Model: PCB9x15DUB
An experimental circuit board for placing and soldering components. This variant is double-sided and can be soldered from both sides. Ideal for small hobby projects! Distance between holes: 2.54mm (default) Diameter holes: 1mm..
€2.50
Ex Tax:€2.07
Model: PCB9x15LANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has lanes over the entire length (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 9 x 15c..
€2.00
Ex Tax:€1.65
Model: PCB9x15TRIHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture). Note: Due to the production process, some copper splinters may occur..
€2.75
Ex Tax:€2.27
Model: FLRPI4CASE
The Flirc is an aluminum housing with built-in heatsink for the Raspberry Pi 4. This housing is very easy to assemble. Mounting material is included. Specifications: Dimensions: 94 x 66 x 26mm Color: Aluminum and black Materials: Plas..
€19.90
Ex Tax:€16.45
Model: FLRPICASEV2.1
The Flirc is an aluminum housing with built-in heatsink for the Raspberry Pi B+, 2(B+), 3(B, B+). This housing is very easy to assemble. Mounting material is included. Specifications: Dimensions: 93.5 x 66.5 x 27mm Color: Aluminum and b..
€16.90
Ex Tax:€13.97
Showing 51 to 100 of 411 (9 Pages)
1
false
true
true
Remove
Change
tr