Menu
Your Cart

Please note! Due to the busy period around the holidays, there is a chance of longer delivery time.

Temperature

Model: LILYGO-L715
A temperature sensor that is easy to use in combination with, among others, the TTGO T5 4.7 E-paper modules or TTGO T-Higrow modules...
€4.50
Ex Tax:€3.72
Model: AM2301-MOD
The AM2301 is a very accurate temperature and humidity sensor. The sensor is a lot more accurate than the DHT11, and comparable to the DHT22. The sensor is relatively large, but this makes it easier to mount. See the manual under the "Downloads" t..
€6.00
Ex Tax:€4.96
Model: AM2320
A handy temperature sensor and humidity sensor...
€3.00
Ex Tax:€2.48
Model: AHT21B-MOD
A small temperature and humidity sensor in one. See the following page for a library for this sensor: Adafruit AHTX0..
€3.00
Ex Tax:€2.48
Model: AHT25-MOD
A small temperature and humidity sensor in one. See the following page for a library for this sensor: Adafruit AHTX0 Note: The pin spacing is not compatible with standard pin headers and DuPont connectors...
€3.00
Ex Tax:€2.48
Model: AM2122
A handy temperature and humidity sensor. Pinout (left to right from the front): VDD: Supply voltage SDA: Serial Data (One-Wire) GND: Ground NC: Not connected See the datasheet under the tab "Downloads" for more information. See..
€4.00
Ex Tax:€3.31
Model: AM2315C
A handy temperature and humidity sensor. See the following page for a library for this sensor: AM2315..
€13.00
Ex Tax:€10.74
Model: DHT20
A handy temperature and humidity sensor in one. Pinout (left to right from the front): VDD: Supply voltage SDA: Serial Data (I2C) GND: Ground SCL: Serial Clock (I2C) See the datasheet under the tab "Downloads" for more information..
€3.00
Ex Tax:€2.48
Model: BME280MOD
A very compact barometer that works with I2C or SPI. The BME280 is an 3-in-1 module that can measure temperature, pressure and humidity. For more information see the datasheet under the tab "Downloads".  The module can only be powered with..
€7.50
Ex Tax:€6.20
Model: BME280LVLCNV
A very compact barometer that works with I2C. The BME280 is an 3-in-1 module that can measure temperature pressure and humidty For more information see the datasheet under the tab "Downloads". This version includes a level converter and voltage..
€8.50
Ex Tax:€7.02
Model: BME680LVLCNV
This module has four sensors in one that can measure temperature, air pressure, humidity and air quality. The module has a built-in level converter making it easy to use with both 3.3V and 5V microcontrollers. Specifications: Supply voltage:..
€14.00
Ex Tax:€11.57
BMP180 Digital Barometer Pressure Sensor Module
On request
Model: BMP180
A very compact barometer that works with I2C. The BMP180 is the better successor of the BMP085. The module can be supplied through the VCC pin with 3.3V or 5V. It also has a 3.3V output ("3.3" pin). The I2C only works with 3.3V and needs a level s..
€4.00
Ex Tax:€3.31
Model: BMP280
A very compact barometer that works via I2C or SPI. The BMP280 is the better successor to the BMP180 with buildin temperature sensor and pressure sensor. For more information see the datasheet under the tab "Downloads". The module can only be f..
€4.00
Ex Tax:€3.31
Model: BMP388
A very compact temperature and air pressure sensor (barometer). The BMP388 is the successor to the BMP280. The module has a built-in level converter making it easy to use with both 3.3V and 5V microcontrollers. Specifications: Supply voltage..
€7.50
Ex Tax:€6.20
Model: CCS811HDC1080MOD
This module contains a CCS811 digital gas sensor and an HDC1080 humidity and temperature sensor. This sensor module is intended for indoor use in combination with a microcontroller via an I2C interface. The CCS811 module is a digital gas sensor th..
€30.50
Ex Tax:€25.21
Model: DFROBOT-SEN0546 Brand: DFRobot
..
€10.00
Ex Tax:€8.26
Model: DFROBOT-SEN0527 Brand: DFRobot
..
€6.00
Ex Tax:€4.96
DFRobot Fermion MCP9808 I2C Temperature Sensor
2-4 Weeks
Model: DFROBOT-SEN0435 Brand: DFRobot
..
€7.50
Ex Tax:€6.20
Model: DFROBOT-SEN0428 Brand: DFRobot
..
€10.50
Ex Tax:€8.68
Model: DFROBOT-SEN0434 Brand: DFRobot
..
€12.00
Ex Tax:€9.92
Model: DFROBOT-SEN0528 Brand: DFRobot
..
€7.00
Ex Tax:€5.79
Model: DFROBOT-SEN0497 Brand: DFRobot
..
€9.00
Ex Tax:€7.44
Model: DFROBOT-SEN0137 Brand: DFRobot
..
€9.00
Ex Tax:€7.44
Model: DFROBOT-DFR0024 Brand: DFRobot
A handy, small DS18B20 temperature sensor module from DFRobot. The module provides an analog output signal. With its convenient connector and included cable, this module is easy to use with other modules in DFRobot's Gravity series. See the follow..
€6.00
Ex Tax:€4.96
Model: DFROBOT-SEN0536
A CO2 sensor, humidity sensor and a temperature sensor in one of DFRobot...
€55.00
Ex Tax:€45.45
Model: DFROBOT-SEN0385 Brand: DFRobot
..
€21.00
Ex Tax:€17.36
Model: DHT11
A handy temperature and humidity sensor. Specifications: Measurement range Humidity: 20% - 90% RH (0-50 °C temperature compensation) Measurement range Temperature: 0 - +50 °C Air humidity precision: ±5.0% RV Temperature precision: ±2.0..
€2.50
Ex Tax:€2.07
Model: DHT22
A handy temperature and humidity sensor. This one is more precise than the DHT11. Specifications: Measurement range Humidity: 0 - 100% RH (0-50 °C temperature compensation) Measurement range Temperature: -40 - +80 °C Air humidity precisi..
€5.50
Ex Tax:€4.55
Model: DHT22MOD
DHT22 Module + Cables. A handy temperature sensor and humidity sensor. This is a lot more accurate than the DHT11. Humidity measurement range: 0% ~ 100% RH Measuring range temperature: -40 ~ +80 °C. Humidity accuracy: ±2.0% RH (typical),..
€6.00
Ex Tax:€4.96
Model: XH-W3001-12V
With this module you can have a relay switch automatically based on temperature. When the relay switches, the red and yellow wire are connected to each other. The desired temperature can be set with the buttons at which the relay switches on and off...
€5.50
Ex Tax:€4.55
Model: XH-W3001-24V
With this module you can have a relay switch automatically based on temperature. When the relay switches, the red and yellow wire are connected to each other. The desired temperature can be set with the buttons at which the relay switches on and off...
€5.50
Ex Tax:€4.55
Model: XH-W1209
With this module you can switch a relay automatically based on the temperature. With the SET, + and buttons you can set the desired temperature. Everything is controlled by the built-in microcontroller. We also sell a housing for this thermostat:..
€4.00
Ex Tax:€3.31
Model: DS18B20ADAPTER
This is a handy adapter for easily connecting a DS18B20 sensor to a microcontroller. The resistance needed to read the sensor is already on the module. Specifications: Resistance: 4.7kΩ Dimensions PCB: 23 x 20.5mm Package contents: ..
€2.00
Ex Tax:€1.65
DS18B20 Temperature Sensor with Cable - Waterproof - High temperature - 10m
2-4 Weeks
Model: DS18B20CBLSILICONE10M
This DS18B20 temperature sensor has a stainless steel housing and it is extended with a silicone cable of approximately 10m. The sensor can be easily connected with this adapter: DS18B20 Adapter. Pinout wires: Red: Input voltage Yellow: Da..
€16.00
Ex Tax:€13.22
Model: DS18B20KABELSILICONE2M
The DS18B20 temperature sensor processed in a stainless steel housing and extended with a cable of about 200cm. Pinout wires: Red: Input voltage Yellow: Data White or Black: Gnd/min. See the datasheet under the tab "Downloads" for m..
€6.00
Ex Tax:€4.96
Model: DS18B20KABELSILICONE4M
The DS18B20 temperature sensor housed in a stainless steel housing and extended with a cable of about 400cm. The sensor can be easily connected with this adapter: DS18B20 Adapter. Pinout wires: Red: Input voltage Yellow: Data White or Bl..
€8.00
Ex Tax:€6.61
Model: DS18B20
A small but accurate temperature sensor in a TO-92 package. See the datasheet under the tab "Downloads" for more information...
€1.75
Ex Tax:€1.45
Model: DS18B20KABELSILICONE
The DS18B20 temperature sensor processed in a stainless steel housing and extended with a cable of about 100cm. The sensor can be easily connected with this adapter: DS18B20 Adapter. Pinout wires: Red: Input voltage Yellow: Data White or..
€4.50
Ex Tax:€3.72
GY-MS5803-01BA Pressure and Temperature Sensor Module - I2C
New
Model: GY-MS5803-01BA
A very compact barometer and temperature sensor in one. The sensor chip is designed to perform underwater measurements and is therefore waterproof on top (note: the PCB itself is not water resistant). See the following page for an Arduino IDE libr..
€15.50
Ex Tax:€12.81
GY-MS5803-14BA Pressure and Temperature Sensor Module - I2C
New
Model: GY-MS5803-14BA
A very compact barometer and temperature sensor in one. The sensor chip is designed to perform underwater measurements and is therefore waterproof on top (note: the PCB itself is not water resistant). See the following page for an Arduino IDE libr..
€21.50
Ex Tax:€17.77
GY-MS5837-02BA Pressure and Temperature Sensor Module - I2C
New
Model: GY-MS5837-02BA
A very compact barometer and temperature sensor in one. The sensor chip is designed to perform underwater measurements and is therefore waterproof on top (note: the PCB itself is not water resistant). The built-in level converter makes it suitable fo..
€12.50
Ex Tax:€10.33
GY-MS5837-30BA Pressure and Temperature Sensor Module - I2C
New
Model: GY-MS5837-30BA
A very compact barometer and temperature sensor in one. The sensor chip is designed to perform underwater measurements and is therefore waterproof on top (note: the PCB itself is not water resistant). The built-in level converter makes it suitable fo..
€19.50
Ex Tax:€16.12
Model: GY-SDC40
A compact CO2, humidity and temperature sensor with I2C interface. See the following page for a library for this sensor: Sensirion I2C SCD4x Arduino Library..
€22.00
Ex Tax:€18.18
Model: GY-SDC41
A compact CO2, humidity and temperature sensor with I2C interface. See the following page for a library for this sensor: Sensirion I2C SCD4x Arduino Library..
€29.50
Ex Tax:€24.38
Model: GY-SHT31-D
This is a very compact temperature and humidity sensor module...
€4.00
Ex Tax:€3.31
Showing 1 to 50 of 102 (3 Pages)
1
false
true
true
Remove
Change
tr