Menu
Your Cart

Optical

Model: TCRT5000MOD1X
With this module you can detect the proximity of an object or follow a black line using infrared light. This module works based on reflection of infrared light. When following a line, the black line ..
€2.00
Ex Tax:€1.65
Model: TCRT5000MOD3X
With this module you can detect the proximity of an object or follow a black line using infrared light. This module works based on reflection of infrared light. When following a line, the black line ..
€4.50
Ex Tax:€3.72
Model: TCRT5000MOD5X
With this module you can detect the proximity of an object or follow a black line using infrared light. This module works based on reflection of infrared light. When following a line, the black line ..
€7.00
Ex Tax:€5.79
Model: HY-S301
With this module you can follow a black line by using infrared light. This module works based on the reflection of infrared light. When following a line, the black line must therefore be able to abso..
€4.50
Ex Tax:€3.72
Model: MIR-3.0Y
With this module you can follow a black line by using infrared light. This module works based on the reflection of infrared light. When following a line, the black line must therefore be able to abso..
€6.00
Ex Tax:€4.96
Model: BH1750FVI
This light sensor has a large range en can be used (for example) to adjust the backlight of an LCD screen by measuring the available lighting. This module has a sensing range form 1 - 65535 lx. Sp..
€3.50
Ex Tax:€2.89
Model: E18-D80NK
The E18-D80NK sensor can measure the distance between an object with infrared reflection and send a signal. With the adjustment potentiometer you can set the desired distance of 3-80cm. Specificat..
€5.00
Ex Tax:€4.13
Model: FLAMESENSOR
Detects fire/flames with wavelengths from 760 to 1100nm. Operates at 3.3V to 5V. The output D0 is high if the set light intensity falls below the threshold value, and thus low if it rises above the t..
€2.50
Ex Tax:€2.07
Model: GL5528
A photosensitive resistor (LDR) to measure the amount of light. The resistance varies based on the amount of light the LDR receives. The main differences between the GL55XX sensors are explained be..
€0.30
Ex Tax:€0.25
Model: GL5537
A photosensitive resistor (LDR) to measure the amount of light. The resistance varies based on the amount of light the LDR receives. The main differences between the GL55XX sensors are explained be..
€0.30
Ex Tax:€0.25
Model: 4CHIRSENSOR
This 4 channel infrared detection sensor can be used to detect objects. The infrared light is emitted and specified by the infrared sensor. You can adjust the sensitivity (and thus distance) indivi..
€4.50
Ex Tax:€3.72
Model: LIGHTSENSORV3
Detects change in light with this adjustable module. Operates on 3.3V t/m 5V. The output D0 is HIGH when the light intensity drops below the threshold. When the light intensity is above the th..
€2.50
Ex Tax:€2.07
Model: LIGHTSLOTSENSOR
This light sensor has a small area in which the light is sent to a phototransistor. The phototransistor responds accordingly when the light is transmitted. This means that this module can detect whet..
€3.00
Ex Tax:€2.48
Model: LIGHTSLOTSENSOR10MM
This light sensor has a small area in which the light is sent to a phototransistor. The phototransistor responds accordingly when the light is transmitted. This means that this module can detect whet..
€3.00
Ex Tax:€2.48
Model: LIGHTSLOTSENSORCARKIT
Two light slot sensor modules for the DIY car kits. With these modules the speed of the wheels can be measured. These light sensors have a small piece in which the light is sent to a phototransisto..
€4.50
Ex Tax:€3.72
Model: LILYPADTEMT6000
A light sensor (TEMT6000) especially for LilyPad products. By reading out the analog voltage you can measure the light intensity in your environment (measuring on "S" pin) This sensor works on 5V DC. ..
€4.00
Ex Tax:€3.31
Model: M5STACK-U009
The M5Stack Color Unit is an RGB color sensor module for M5Stack. The module works via I2C communication. Specifications: Sensor: TCS3472 I2C address: 0x29 2x LEGO® holes for mounting..
€6.00
Ex Tax:€4.96
Model: M5STACK-U065
This is a laser receiver module with Grove connection for the M5Stack.  This works together with the M5Stack Laser TX Unit. Specifications: Wavelength receiver: 650nm 2x LEGO®..
€6.00
Ex Tax:€4.96
Model: M5STACK-U021
This is a module with an LDR sensor for M5Stack. Specifications: LM393 LDR sensor Adjustable digital output via potentiometer 2x LEGO® compatible holes 1x Grove connection (1x Grove..
€4.00
Ex Tax:€3.31
Model: M5STACK-U058
This is a light slot sensor module with a Grove connection for M5Stack.  Specifications: ITR9606 sensor (IR sensor) Angle of sensor relative to module: 180 2x LEGO® compatible ho..
€4.00
Ex Tax:€3.31
Model: M5STACK-U057
This is a light slot sensor module with a Grove connection for M5Stack.  Specifications: ITR9606 sensor (IR sensor) Angle of sensor relative to module: 90 degrees 2x LEGO® compat..
€4.00
Ex Tax:€3.31
Model: MH-ET-LIVE-SCANNER
A simple barcode and QR code scanner. Has a UART interface and an HID interface. The board has a built-in LED for scanning in the dark. Specifications: Micro USB UART interface Micro USB HI..
€25.00
Ex Tax:€20.66
Model: ML8511MOD
With this module based on an ML8511 chip you can easily measure the UV light intensity inside and/or outside. The module measures both UV-A and UV-B light and gives an analog output signal. Specifi..
€4.00
Ex Tax:€3.31
Model: IROBJECTSENSMOD
Detects the proximity of an object by means of infrared light. The sensitivity can be adjusted with the potentiometer on the module. Works on 3.3V to 5V. The output D0 is low if the reflection value ..
€2.00
Ex Tax:€1.65
Model: CNY70
A combination of an infrared LED and a phototransistor. You can use this for the detection of objects at a very short distance. This product does not come from Vishay, but is a compatible version. S..
€0.50
Ex Tax:€0.41
Model: TCRT5000
A combination of an infra-red LED and a phototransistor. You can use this for the detection of objects at short range. See the datasheet under the tab "Downloads" for more information...
€0.35
Ex Tax:€0.29
Model: OP2MPCAM
A 2MP camera with a wide-angle lens. This camera is only suitable for the Orange Pi Plus or Orange Pi Plus2 (see images for example)..
€8.00
Ex Tax:€6.61
Model: OP2MPCAMSTD
A 2MP camera with a wide-angle lens. This camera is suitable for various Orange Pi's with a standard CSI camera connector...
€10.00
Ex Tax:€8.26
Model: OV7670
A widely used camera module for Arduino. This is a good starting point for using in combination with an Arduino Uno or Mega: OV7670 with both arduino uno and now mega . Specifications: Reso..
€6.00
Ex Tax:€4.96
Model: OV7670AL422
A widely used camera module for Arduino. This version has a built-in AL422 FIFO which makes the readout less time-critical. You can use this library in combination with an Arduino Uno or Mega: Githu..
€12.00
Ex Tax:€9.92
Model: PCF8591
This module has 4 analog to digital (A/D) converters, 1 digital to analog (D/A) converter and 3 built-in sensors: A light sensor, a temperature sensor and a potentiometer. The sensors are connected vi..
€3.50
Ex Tax:€2.89
Model: PYCPYSCAN
With the Pyscan from Pycom you can easily equip your WiPy, LoPy, SiPy, FiPy or Gpy with a RFID-NFC sensor, accelerometer and light sensor. Specifications and features: Accelerometer: ST LIS2H..
€35.00
Ex Tax:€28.93
Model: RPICAMV2
A camera for the Raspberry Pi. Specifications: Sensor: Sony IMX219 Aperture: 2.0 Focal length: 3.04mm Field of view: 62.2° Maximum photo resolution: 8MP (3280 x 2..
€26.00
Ex Tax:€21.49
Model: RPICOMPCAMV1.3
This camera is based on the old design of the Raspberry Pi camera V1.3. Specifications: Sensor: OmniVision OV5647 Maximum photo resolution: 5MP (2592 x 1944 pixels) Maximum movie resoluti..
€8.00
Ex Tax:€6.61
Model: RPICOMPCAMIR
This camera is based on the old design of the Raspberry Pi camera V1.3. In addition, this camera also has a night function with infrared lighting.   Specifications: Sensor: OmniVision OV..
€14.00
Ex Tax:€11.57
Model: RPICOMPCAMIRFISH
This fisheye camera is based on the old design of the Raspberry Pi camera V1.3. In addition, this camera also has a night function with infrared lighting.   Specifications: Sensor: OmniV..
€15.00
Ex Tax:€12.40
Model: REDLASERSENSOR
With this indoor laser sensor module you can detect laser signals in order to send digital signals via the laser. Specifications: Input voltage: 5V DC Binary output signal (0 or 5V) Can be used in ..
€2.00
Ex Tax:€1.65
Model: TCRT5000MOD
Detect the proximity of an object by means of infrared light. The sensitivity can be adjusted with the potentiometer on the module. Works with 3.3V to 5V. The output D0 is low if the reflection val..
€2.00
Ex Tax:€1.65
Model: TCS3200DMOD
With this sensor you can detect the color of an object. There are four LEDs on the module as a light source. In the middle is the TCS3200D color sensor (upgraded version of the TCS230 sensor). Spe..
€4.00
Ex Tax:€3.31
Model: TCS34725MOD-RECT
This sensor module can detect the color of an object. The module has two LEDs as a light source with the color sensor in the middle. Because of the built-in level converter, the sensor can be used wit..
€3.50
Ex Tax:€2.89
Model: TEMT6000MOD
With the TEMT6000 light sensor module you can easily read out the amount of light in an analog way. With this module, a 3-pin header is supplied to solder onto the module. The module also has a 3mm ..
€3.00
Ex Tax:€2.48
UV Light Sensor Module - 200-370nm
New
Model: UVSENSORMOD
With this module you can easily measure the UV light intensity indoors and/or outdoors. The module provides an analog output signal. Specifications: Supply voltage: 3.3-5V DC Maximum curren..
€5.00
Ex Tax:€4.13
Model: WS-10344
A Waveshare-made camera for the Raspberry Pi. Specifications: Sensor: OV5647 Aperture: 2.35 Focal Length: 3.15mm Field of view: 160° Maximum resolution photo: 5MP (256..
€19.00
Ex Tax:€15.70
Model: WS-16864
With this HAT you provide your Raspberry Pi with various sensors that communicate via I2C. The HAT is designed for the Raspberry Pi Zero, but also works with other models. In addition, the module can ..
€16.50
Ex Tax:€13.64
Model: WMD1MBH1750FVISHIELD
A shield with a BH1750FVI light sensor for the (Wemos) D1 Mini. The shield works with I2C and the I2C address is adjustable.(see PCB) Specifications: Range of light intensity: 1 - 65535 lx ..
€3.50
Ex Tax:€2.89
Showing 1 to 45 of 45 (1 Pages)
1
false
false
true
Remove
Change
tr