Menu
Your Cart

Please note! Due to the busy period around the holidays, there is a chance of longer delivery time.

Acceleration-Rotation

Model: ADXL345V2
The ADXL345 is a small, low power, 3-axis accelerometer with high resolution (13-bit) measurements of up to ±16 g. Specifications: Chip: ADXL345 Supply voltage: 3.3-5V DC Signal voltage: 3.3V Works with I2C or SPI (3- or 4-wire) ..
€5.00
Ex Tax:€4.13
Model: AS5600MOD
An encoder module that can very accurately measure an angle of, for example, an axis by means of a magnetic field. In order for the sensor to work, the diametrically magnetized magnet must be attached to a shaft (e.g. with glue). The sensor must then..
€3.00
Ex Tax:€2.48
Model: HXD-2801
A so-called ball switch can easily be used to see if something is tilted or not. This ball switch ensures that you have contact between the pins at an angle of 45 degrees or more. (see images) The metal ball in the tube then ensures that two contac..
€0.40
Ex Tax:€0.33
Model: SW-520DMOD
This module can detect a specific tilt of the module itself. The golden component is a ball switch. The balls in the module ensure contact at a certain angle. The sensitivity can practically not  be adjusted with the potentiometer. The ball swit..
€2.00
Ex Tax:€1.65
BIGTREETECH ADXL345 Digital 3-axis Accelerometer V1.0
New
Model: BTT-ADXL345-V1.0
The ADXL345 is a small, low power, 3-axis accelerometer with high resolution. This module is made to mount on the back of a round NEMA14 stepper motor, these motors are often used as extruder motors...
€8.50
Ex Tax:€7.02
Model: DFROBOT-SEN0250 Brand: DFRobot
..
€12.00
Ex Tax:€9.92
Model: DFROBOT-DFR0830 Brand: DFRobot
..
€4.00
Ex Tax:€3.31
Model: DFROBOT-DFR0143 Brand: DFRobot
..
€14.50
Ex Tax:€11.98
Model: LILYPADADXL335
An accelerometer (ADXL335) especially for LilyPad products. The accelerometer must be powered with 3.3V and sends 0-3.0V on the three axes. See the datasheet for more information. Notice: the color of the PCB can differ (can be red or purple),..
€8.00
Ex Tax:€6.61
Model: M5STACK-U095 Brand: M5Stack
This is a 6-axis module with 3-axis accelerometer, 3-axis gyroscope and a Grove connection for M5Stack. The module works via I2C communication. Specifications: Sensor: MPU6886 Gyroscope: 3-axis (x, y, z) Accelerometer: 3-axis (x, y,..
€11.00
Ex Tax:€9.09
Model: M5STACK-U056 Brand: M5Stack
This is a 3-axis accelerometer module with a Grove connection for M5Stack. The module works via I2C communication. Specifications: Sensor: ADXL345 3-axis (x, y, z) Resolution: 13-bit Measurements up to ±16g I2C address: 0..
€6.00
Ex Tax:€4.96
Model: MPU6050
The MPU-6050 sensor contains a 3-axis MEMS accelerometer and a 3-axis MEMS gyroscope in one chip. It is very precise thanks to the 16-bit analog to digital convertion hardware for each channel. Specifications: Chip: MPU-6050 Power Supply v..
€7.00
Ex Tax:€5.79
Model: MPU6500
The MPU-6500 sensor contains a 3-axis MEMS accelerometer, 3-axis MEMS gyroscope on a single chip (6DOF). Specifications: Chip: MPU-6500 Power supply: 3.3-5VDC Signal voltage: 3.3V Gyroscope range: ±250, ±500, ±1000, ±2000 °/s (16 bits)..
€5.50
Ex Tax:€4.55
Model: MPU9250
The MPU-9250 sensor contains a 3-axis MEMS accelerometer, 3-axis MEMS gyroscope and 3-axis MEMS magnetometer on a single chip. (9DOF) Chip: MPU-9250 Power supply: 3.3-5VDC Signal voltage: 3.3V Gyroscope range: ±250, ±500, ±1000, ±2000 °/s (16 b..
€11.75
Ex Tax:€9.71
MPU-9255 Accelerometer - Gyroscope - Magnetometer 9DOF Module 3.3V-5V
Discontinued
Model: MPU9255
The MPU-9255 is the successor to the MPU-9250 and contains a 3-axis MEMS accelerometer, 3-axis MEMS gyroscope and 3-axis MEMS magnetometer in one chip (9DOF). There is virtually no difference between these two versions. Specifications: Chip:..
€13.50
Ex Tax:€11.16
Olimex PIEZZO-KNOCK - Electronic Shock Sensor
New
Model: OM-PIEZZO-KNOCK
This electronic shock sensor from Olimex uses a Piezo element to measure vibrations/shocks. A Piezo element generates electricity when subjected to mechanical stress (vibrations) which means that there is no need to provide a power supply to the sens..
€1.50
Ex Tax:€1.24
Model: RPISENSEHAT
The Sense HAT is an extensive module with numerous sensors made for a Raspberry Pi single board computer (SBC)...
€35.00
Ex Tax:€28.93
Teensy Prop Shield - with Motion Sensors
2-4 Weeks
Model: TEENSYPROPSHIELD
With this shield for Teensy 3.2 and Teensy LC you expand the microcontroller with the following features: Accelerometer (FXOS8700) Gyroscope (FXAS21002) Air pressure sensor and altimeter (MLP3115) 8MB Flash memory Fast LED driver 2W A..
€20.50
Ex Tax:€16.94
Model: SW-18010PMOD
This module can detect vibration. In the black component on the module there is a spiral that touches the casing with a vibration on the component. The sensitivity can be set with the potentiometer. Pin description: VCC: 3-5V DC GND: min/gr..
€2.00
Ex Tax:€1.65
Model: SW-420MOD
This module can detect vibration. In the blue component on the module there is a rod that no longer touches the housing when there is a vibration on the component. The sensitivity can be set with the potentiometer. Pin description: VCC: 3-5..
€2.00
Ex Tax:€1.65
Waveshare 10-DOF IMU Sensor Module for Raspberry Pi Pico - MPU-9250 - LPS22HB
Unknown
Model: WS-19358
This module with Raspberry Pi Pico form factor has a 3-axis MEMS accelerometer, 3-axis MEMS gyroscope and 3-axis MEMS magnetometer (9DOF). In addition the module also has an air pressure sensor...
€19.50
Ex Tax:€16.12
Model: WS-16864 Brand: Waveshare
With this HAT you provide your Raspberry Pi with various sensors that communicate via I2C. The HAT is designed for the Raspberry Pi Zero, but also works with other models. In addition, the module can also be used with other microcontrollers such as a..
€36.50
Ex Tax:€30.17
Showing 1 to 22 of 22 (1 Pages)
1
false
true
true
Remove
Change
tr