Model: IMAXB6MINI
This iMAX B6mini is a balance charger/discharger with which you can easily charge different types of batteries. It can be connected to your PC via micro USB (micro USB cable not included) to control it and perform firmware upgrades. Multiple cables w..
€34.00
Ex Tax:€28.10
Model: SOLARPANEL18V560MA
This solar panel can be used to run your device on solar energy. With this 10W solar panel you can get quite some energy.
Specifications:
Output voltage(max): ~22V (varies by current and depending on the intensity of the sun)
Output voltag..
€20.00
Ex Tax:€16.53
Model: SOLARPANEL5V200MA
This solar panel can be used to connect 5V devices.
Specifications:
Nominal output voltage: ~5V* (may be higher at low load)
Maximum output current (short circuit): ~200mA*
Is splash-proof except for the electrical contacts on the back
..
€3.50
Ex Tax:€2.89
Model: SOLARPANEL5V60MA
This solar panel can be used for connecting 5V devices.
Specifications:
Output voltage (max): ~5V (varies by the current and depending on the intensity of the sun)
Current (max): ~60mA
Dimensions: 68 x 37 x 2mm
Is splashproof except fo..
€2.50
Ex Tax:€2.07
Model: WS-16158
Brand: Waveshare
This solar panel can be used to run your device on solar energy. The panel comes with a 3.5mm DC Jack making it ideal for use with the following solar energy module: Waveshare Solar Power Management Module
Note: The voltage from this solar panel i..
€17.00
Ex Tax:€14.05
Model: SOLARPANEL5V1ADCDC
This somewhat flexible solar panel is ideal for connecting a USB device. That can be an Arduino, power bank, mobile device etc.
The panel also has four large holes for mounting, eg to fasten on a backpack or screw.
Specifications:
Output vo..
€12.00
Ex Tax:€9.92
Model: SONOFF-SOLARPANEL
This solar panel is made for the Sonoff ZBCurtain. The double-sided tape makes it easy to stick the panel to the window and as such provides the ZBCurtain with extra energy so that the batteries need to be charged less often.
Note: The voltage fro..
€14.00
Ex Tax:€11.57
Model: XSG-0504000HEU
A 5V DC adapter with USB-C...
€12.00
Ex Tax:€9.92
Model: INR18650-28HE
These Tenpower Li-ion 18650 cells can be used in various applications.
Note: This battery is "bare" and does not contain protection against too high currents, deep discharge or too high a charging voltage. Purchase this battery only if you underst..
€3.25
Ex Tax:€2.69
Model: TP4056PROTECT
A li-ion charger with micro-USB connection in combination with a li-ion protection circuit for too high discharge currents or too low a battery voltage.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% ac..
€2.00
Ex Tax:€1.65
Model: TP4056
A fairly simple li-ion charger with mini-USB connection.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% accuracy)
Input voltage: 4.5V-5.5V
Two LED's indicating the status of loading
Mini-USB input..
€1.50
Ex Tax:€1.24
Model: TP4056PROTECTUSB-C
A li-ion charger with USB-C connection in combination with a li-ion protection circuit for too high discharge currents or a low battery voltage.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% accuracy)
..
€2.50
Ex Tax:€2.07
Model: UL7-12
A 12V lead-acid battery with a capacity of 7.0Ah...
€15.50
Ex Tax:€12.81
Model: USBADJDCDC3WSEGMENT
A step-up-down (buck-boost) DC-DC converter with a USB male and micro USB connection. This module has a potentiometer for setting the output voltage and a voltage meter with display to measure the output voltage. The display can be turned off with a ..
€4.00
Ex Tax:€3.31
Model: USBDCDC1000LI-ION
A complete DC-DC converter to boost the Li-ion voltage to 5V USB voltage. This module has a built-in li-ion charge and protection circuit against over- and undervoltage, overtemperature (chip) and short-circuit protection.
This is therefore very s..
€2.50
Ex Tax:€2.07
Model: USBDCDC1200
A DC-DC converter to boost a low voltage to 5V USB voltage.
Specifications:
Range of the input voltage(Vin): 2.0V - 5.0V
Output voltage: 5.1V ± 0.1V
Efficiency: up to 90%, average 85%
Output current: Vin >= 2.0V: 600mA,&..
€2.50
Ex Tax:€2.07
Model: USBDCDC600
A DC-DC converter to boost low voltage to 5V USB voltage.
Specifications:
Range of input voltage (Vin): 0.9V - 5.0V
Output voltage: 5.0V
Efficiency: up to 96%
Output current: Fin> = 0.9V: 100mA, Fin> = 1.5V: 200mA, Fin&..
€1.50
Ex Tax:€1.24
Model: KIS-3R33S
A DC-DC converter to lower a high voltage to 5V USB voltage.
Notice: It is possible that this module is shipped with a KSZ-3R33S instead of a KIS-3R33S. ..
€4.00
Ex Tax:€3.31
Model: USBLOAD1A-2A
This module can be connected to a USB port to act as a load.
With a switch you can switch between 1A and 2A load.
There is an LED indication to indicate the position:
Red: 2A
Green: 1A
Note: The module can become hot with long use...
€1.50
Ex Tax:€1.24
Model: USBDC-DCQC3.0
A DC-DC converter to lower a high voltage to 5V USB voltage with fast charging function.
Specifications:
Input voltage range (Vin): 6V - 32V
Output: 5.0V with 3.4A, 9V*with 2.5A and 12V ** with 2A
Efficiency: 90-97%
LED indicating the ..
€3.50
Ex Tax:€2.89
Model: QC-MINI
A DC-DC converter to reduce a high voltage to 5V USB voltage with fast charging function.
Specifications:
Input voltage: 6 - 32V DC
Output voltage: 5.0V DC, 9V DC* or 12V DC** (depending on load fast charging support, 5V default)
Maximum..
€3.50
Ex Tax:€2.89
Model: INR14500H10
A rechargeable Li-ion battery.
Note: This battery is "bare" and does not contain any protection against excessive current, deep discharge or excessive charging voltage. Only buy this battery if you understand the potentially dangerous consequences..
€6.00
Ex Tax:€4.96
Model: VARTACR2450
A standard CR2450 battery from Varta...
€2.50
Ex Tax:€2.07
Model: VARTA4XAA
An alkaline AA battery from Varta...
€2.50
Ex Tax:€2.07
Model: SLA7-12
A cheap and good 12V lead-acid battery.
See the datasheet for detailed information...
€15.00
Ex Tax:€12.40
-voor-raspberry-pi-default-200x200.jpg "Waveshare Power over Ethernet PoE HAT (B) - for Raspberry Pi")
Model: WS-18014
Brand: Waveshare
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. There is also a built-in fan for cooling the Raspberry Pi, which can be turned on by default or programmed when it turns on. In addition, th..
€19.00
Ex Tax:€15.70
-for-raspberry-pi-3b+-4b-200x200.jpg "Waveshare Power over Ethernet PoE HAT (C) - for Raspberry Pi")
Model: WS-19445
Brand: Waveshare
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. There is also a built-in fan for cooling the Raspberry Pi, which can be turned on with a switch.
This module is suitable for the Raspberr..
€19.00
Ex Tax:€15.70
-for-raspberry-pi-200x200.jpg "Waveshare Power over Ethernet PoE HAT (E) - for Raspberry Pi")
Model: WS-23285
Brand: Waveshare
With this small Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. Due to its small size, it fits in many standard Raspberry Pi housings.
This module is suitable for the Raspberry Pi 3B+ and 4B.
..
€16.00
Ex Tax:€13.22
-for-raspberry-pi-5-front-200x200.jpg "Waveshare Power over Ethernet PoE HAT (F) - for Raspberry Pi 5")
Model: WS-26399
Brand: Waveshare
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. Additionally, there is a built-in fan for cooling the Raspberry Pi.
This module is suitable for the Raspberry Pi 5.
Note: To use the P..
€19.50
Ex Tax:€16.12
Model: WS-16120
Brand: Waveshare
With this module, a Li-ion/li-Po battery can easily be charged with a solar panel (battery and solar panel are not included). If there is not enough sun, the battery can also be charged via the micro USB connection (micro USB cable is not included). ..
€10.50
Ex Tax:€8.68
Model: WS-19694
Brand: Waveshare
This battery module from Waveshare is made for the Raspberry Pi Pico or other microcontrollers that use the same pin layout. With this module and a 14500 Li-ion battery (not included) you provide your microcontroller with an uninterrupted power suppl..
€14.00
Ex Tax:€11.57
Model: WS-20121
Brand: Waveshare
This battery module from Waveshare is made for the Raspberry Pi Pico or other microcontrollers that use the same pin layout. With this module with included battery you provide your microcontroller with an uninterrupted power supply (UPS). The microco..
€15.00
Ex Tax:€12.40
Model: WMD1MDCPWRSHIELD
A shield to power your (Wemos) D1 Mini via a 5.5 mm DC jack connection or the included 2 pin 2.54mm screw terminal.
The shield has a built-in DC-DC converter that converts the voltage efficiently to 5V.
Specifications:
Input voltage: 7-24V ..
€4.00
Ex Tax:€3.31
Model: WMD1MBATSHIELD
A shield to power your (Wemos) D1 Mini via a Li-ion/Li-Po battery and also charge it.
The shield has an extra USB connection for charging the Li-ion/Li-Po battery(with JST-PH 2.0mm connector) and can be set to 500mA or 1000mA charging current (see i..
€5.50
Ex Tax:€4.55
Model: XTARMC1
This compact 1x li-ion cell charger has various functions and can easily be connected via USB (computer or USB charger) as power supply.
Specifications:
Compatible with various Li-ion cells from 10440 cells up to 26650 (including a 18650 cel..
€4.50
Ex Tax:€3.72
Model: YJ-YSD15S-1201250
This power supply is specially made to be placed on a DIN rail, so that this module can easily be placed in, for example, a meter cupboard.
Specifications:
Input voltage: 85 - 264V AC
Output voltage: 11 - 13V DC (adjustable with potentiome..
€9.50
Ex Tax:€7.85
Model: YJ-YSD15S-0502400
This power supply is specially made to be placed on a DIN rail, so that this module can easily be placed in, for example, a meter cupboard.
Specifications:
Input voltage: 85 - 264V AC
Output voltage: 4 - 6V DC (adjustable with potentiomete..
€9.50
Ex Tax:€7.85
-200x200.JPG "YwRobot Power Shield - 1500mAh Li-Po Battery - for Arduino")
Model: YWR-ARD080913
A shield to power an Arduino Uno, Leonardo, Mega or compatible version of these boards via the 1500mAh Li-Po battery that is present on the shield. The battery can be charged via the Micro USB port of the Power Shield V1. By means of a switch, the sh..
€12.00
Ex Tax:€9.92
Model: YWR-PRMBMINI1
Module to power a breadboard via micro USB. Compatible with the Breadboard 400 and Breadboard 830.
Both power lines are easy to set: One side is 5V and can be switched on/off with the switch, the other side is always on but can be set to 3.3V or 5..
€2.50
Ex Tax:€2.07