Model: MP2307
A very compact DC-DC step-down converter.
Tip: use extra capacitors (more than 100uF) on the input and output to produce a more stable voltage...
€1.50
Ex Tax:€1.24
Model: MP1584
A very compact DC-DC step-down converter.
Tip: use extra capacitors (more than 100uF) on the input and output to produce a more stable voltage...
€1.50
Ex Tax:€1.24
New
Model: INR-18650-M35A
These Molicel Li-ion 18650 cells are of high quality and can be used in various applications.
Note: This battery is "bare" and does not contain protection against too high currents, deep discharge or too high a charging voltage. Purchase this batt..
€5.00
Ex Tax:€4.13
Model: PANASONIC-NCR18650BD
Note: This battery is "bare" and does not contain protection against too high currents, deep discharge or too high a charging voltage. Purchase this battery only if you understand the potentially hazardous effects of Li-ion batteries!..
€5.75
Ex Tax:€4.75
Model: ENELOOPUSBCHARGER-AA-AAA
A USB battery charger from Panasonic Eneloop, suitable for charging up to 4 AA rechargeable batteries at the same time. This charger is ideal for charging our rechargeable Eneloop AA and AAA batteries. The batteries are charged in pairs.
Specifica..
€13.50
Ex Tax:€11.16
Model: PSRPISUPSWITCH
With this kit you make a power switch that automatically shuts off the power when you have turned off the Raspberry Pi. Turning on the Raspberry is then a push of a button on the module. In addition, the module also has a hard shutdown that can be us..
€15.00
Ex Tax:€12.40
Model: PIS-1129
This 12000mAh Li-Po battery is made for use with the PiJuice HAT. The large capacity makes it possible to supply the Raspberry Pi with power for a long time. This Li-Po battery is equipped with an internal protection circuit.
The handy PiJuice Ba..
€36.00
Ex Tax:€29.75
Model: PIS-1783
A spare battery for the PiJuice HAT.
See the following page for more information: PiJuice 1820mAh...
€19.50
Ex Tax:€16.12
Model: PIS-1131
This 5000mAh Li-Po battery is made for use with the PiJuice HAT. The large capacity makes it possible to supply the Raspberry Pi with power for a long time. This Li-Po battery is equipped with an internal protection circuit.
The handy PiJuice Bat..
€29.75
Ex Tax:€24.59
2-4 Weeks
Model: PIS-0212
With this battery module you constantly provide power to a Raspberry Pi. The module includes the following features:
Built-in 1820mAh battery (expandable with an external battery: 5000mAh, 12000mAh)
Charging via Micro USB or via the Raspbe..
€66.00
Ex Tax:€54.55
Model: QS-0305-15W
A step-up boost converter with undervoltage protection. This DC-DC converter has a fixed output voltage of 5V.
Specifications:
Module type: Non-isolated step-up (boost)
Input voltage: 3-5V DC
Input undervoltage protection: 2.7V DC (LED i..
€6.00
Ex Tax:€4.96
Model: QS-2405CBD-2A
An adjustable step-down (buck) converter from QSKJ.
Note: For long-term use, we recommend using a maximum input and output voltage of 30V DC to increase the lifetime of the capacitors.
Note: The potentiometer is multiple turns. It may take a wh..
€3.00
Ex Tax:€2.48
Model: QS-2405CBD-5A
An adjustable 75W step-down buck converter from QSKJ with short circuit and overheating protection. The module can be used to reduce the voltage of, for example, a battery or other power source.
Note: For long-term use, we recommend using a maximu..
€3.50
Ex Tax:€2.89
Model: DC-DCDOWN200W
A powerful step-down converter, for example to lower your 24V battery to 12V.
In addition, this DC-DC converter also has a current limiter built in which is adjustable with a potentiometer.
The maximum output current can be increased by turning t..
€7.00
Ex Tax:€5.79
Model: QS-1212CBDE-20W
An adjustable 20W step-down and step-up, buck and boost converter. Can be used to increase or decrease the voltage of, for example, a battery or other voltage source.
Specifications:
Module type: Non-isolated step-down/up (buck/boost)
Inpu..
€4.00
Ex Tax:€3.31
Model: DC-DC150W
A powerful step-up converter, eg to boost your 12V battery to 24V . For example,to get the most out of your TPA3116 amplifier when using 12V.
Module type: Non-insulated step-up (Boost)
Rectification: Non-synchronous rectification
Input vol..
€6.00
Ex Tax:€4.96
Model: DC-DC150W-CC
A powerful step-up converter with current limiter (adjustable constant current) and undervoltage protection, for example to boost your 12V battery to 24V.
Specifications:
Module type: Non-insulated step-up (Boost)
Rectification: Non-synchr..
€7.00
Ex Tax:€5.79
Model: QS-2448CCBD-600W
A powerful step-up converter with current limiter (adjustable constant current) and undervoltage protection, for example to boost your 12V battery to 24V.
Specifications:
Module type: Non-isolated step-up (Boost)
Rectification: Non-synchro..
€9.50
Ex Tax:€7.85
Model: QS-0524CBDE-15W
An adjustable step-up (boost) converter from QSKJ.
Specifications:
Module type: Non-isolated step-up (boost)
Input voltage: 5-32V DC*
Maximum input current: 4A
Output voltage: 5-50V DC* (adjustable with the potentiometer**)
Maximum o..
€3.50
Ex Tax:€2.89
Model: DCDCSTEPDOWN5VUSB
A DC-DC step-down buck converter with USB(5V) output...
€2.50
Ex Tax:€2.07
Model: DCDCSTEPDOWN5V4XUSB
A DC-DC step-down buck converter with 4 USB (5V) outputs.
Specifications:
Input voltage: 8-35V DC
Output current (total): 8A max (6.4A continuous)
Output current per USB port: 2A max
Output voltage: ~5.2V DC
Efficiency: 95.8% m..
€6.00
Ex Tax:€4.96
-3s-200x200h.jpg "QSKJ Li-ion/Li-Po Protection Circuit (BMS) - 3S")
Model: BMS3S25A-2.8-4.25
A Battery Management System (BMS) for a 3S battery pack. With this circuit you can safely make a battery pack of 3 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage.
S..
€3.50
Ex Tax:€2.89
-4s-200x200h.jpg "QSKJ Li-ion/Li-Po Protection Circuit (BMS) - 4S")
Model: BMS4S25A-2.8-4.25
A Battery Management System (BMS) for a 4S battery pack. With this circuit you can safely make a battery pack of 4 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage.
S..
€3.50
Ex Tax:€2.89
-5s-200x200h.jpg "QSKJ Li-ion/Li-Po Protection Circuit (BMS) - 5S")
Model: BMS5S25A-2.8-4.25
A Battery Management System (BMS) for a 5S battery pack. With this circuit you can safely make a battery pack of 5 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage.
S..
€3.50
Ex Tax:€2.89
Model: MINIDC-DCSD2A
A very compact DC-DC step-down converter.
Pin description:
VO+: Output voltage
GND: Ground/min (shared with input and output)
IN+: Input voltage
EN: Enable pin (connect to ground to disable DC-DC converter)
If you need a fixed out..
€2.50
Ex Tax:€2.07
Model: T6716DV
This official micro USB power supply from the Raspberry Pi Foundation is made for the Raspberry Pi 1, 2(B) and 3(A+/B/B+).
This power supply has a fixed EU plug.
Specifications:
Input voltage: 90 - 264V AC
Voltage: 5.1V DC
Maximum curre..
€8.50
Ex Tax:€7.02
Model: KSA-15E-051300HE
This official USB-C power supply from the Raspberry Pi Foundation is specially made for the Raspberry Pi 4 (B).
This power supply has a fixed EU plug.
Specifications:
Input voltage: 96 - 264V AC
Voltage: 5.1V DC
Maximum current: 3A (300..
€9.00
Ex Tax:€7.44
Model: KSA-15E-051300HE-WH
This official USB-C power supply from the Raspberry Pi Foundation is specially made for the Raspberry Pi 4 (B).
This power supply has a fixed EU plug.
Specifications:
Input voltage: 96 - 264V AC
Voltage: 5.1V DC
Maximum current: 3A (300..
€9.00
Ex Tax:€7.44
Model: RENATACR1220
A standard CR1220 battery...
€1.25
Ex Tax:€1.03
Model: RENATACR2032
A standard CR2032 battery...
€0.85
Ex Tax:€0.70
Unknown
Model: ICR18650-26J
These Samsung Li-ion 18650 cells are of high quality and can be used in various applications.
Note: This battery is "bare" and does not contain protection against too high currents, deep discharge or too high a charging voltage. Purchase this batt..
€4.25
Ex Tax:€3.51
Model: INR21700-50E
These Samsung Li-ion 21700 cells are of high quality and can be used in various applications.
Note: This battery is "bare" and does not contain protection against too high currents, deep discharge or too high a charging voltage. Purchase this batt..
€6.00
Ex Tax:€4.96
Model: SANYO-NCR18650GA
These Sanyo Li-ion 18650 cells are of high quality and can be used in various applications.
Note: This battery is "bare" and does not contain protection against too high currents, deep discharge or too high a charging voltage. Purchase this batter..
€7.00
Ex Tax:€5.79
Model: SEEED-106990290
The Seeed Studio Lipo Rider Plus is a module that charges a Li-Po/Li-ion battery via USB-C. The module has a 5V 2.4A USB-A output. Furthermore, the module has 4 LEDs as a battery indicator and it is possible to mount pin headers. Via the pin headers ..
€6.50
Ex Tax:€5.37
Model: SEEED-106990020
With this shield for the Seeeduino/Arduino Uno you provide the microcontroller with a Li-Po/Li-ion battery connection and a connection for a solar panel . Furthermore, this shield makes it possible to charge the battery via micro-USB or the..
€17.50
Ex Tax:€14.46
Model: SEEED-313070004
This solar panel can be used to power your project with solar power.
Specifications:
Typical voltage: 5.5V
Typical current: 100mA
Open-circuit voltage: 8.2 V
Maximum load voltage: 6.4V
Dimensions: 70x55x3(±0.2) mm
Comes with ~15cm ..
€4.25
Ex Tax:€3.51
Model: SEEED-313070005
This solar panel can be used to power your project with solar power.
Specifications:
Typical voltage: 5.5V
Typical current: 170mA
Open-circuit voltage: 8.2 V
Maximum load voltage: 6.4V
Dimensions: 100x80x3(±0.2) mm
Comes with ~15cm..
€6.50
Ex Tax:€5.37
Model: SEEED-103990564
The Wio Terminal Battery Chassis is an extension for the Wio Terminal from Seeed Studio. The chassis can be easily placed on a Wio Terminal to create a wireless terminal. Moreover, the chassis extends the module with 4 extra Grove digital/analog port..
€24.00
Ex Tax:€19.83
Model: IMAXB6MINI
This iMAX B6mini is a balance charger/discharger with which you can easily charge different types of batteries. It can be connected to your PC via micro USB (micro USB cable not included) to control it and perform firmware upgrades. Multiple cables w..
€34.00
Ex Tax:€28.10
Model: SOLARPANEL18V560MA
This solar panel can be used to run your device on solar energy. With this 10W solar panel you can get quite some energy.
Specifications:
Output voltage(max): ~22V (varies by current and depending on the intensity of the sun)
Output voltag..
€20.00
Ex Tax:€16.53
Model: SOLARPANEL5V200MA
This solar panel can be used to connect 5V devices.
Specifications:
Nominal output voltage: ~5V* (may be higher at low load)
Maximum output current (short circuit): ~200mA*
Is splash-proof except for the electrical contacts on the back
..
€3.50
Ex Tax:€2.89
Model: SOLARPANEL5V60MA
This solar panel can be used for connecting 5V devices.
Specifications:
Output voltage (max): ~5V (varies by the current and depending on the intensity of the sun)
Current (max): ~60mA
Dimensions: 68 x 37 x 2mm
Is splashproof except fo..
€2.50
Ex Tax:€2.07
New
2-4 Weeks
Model: WS-16158
Brand: Waveshare
This solar panel can be used to run your device on solar energy. The panel comes with a 3.5mm DC Jack making it ideal for use with the following solar energy module: Waveshare Solar Power Management Module
Note: The voltage from this solar panel i..
€15.00
Ex Tax:€12.40
Model: SOLARPANEL5V1ADCDC
This somewhat flexible solar panel is ideal for connecting a USB device. That can be an Arduino, power bank, mobile device etc.
The panel also has four large holes for mounting, eg to fasten on a backpack or screw.
Specifications:
Output vo..
€12.00
Ex Tax:€9.92
Model: XSG-0504000HEU
A 5V DC adapter with USB-C...
€12.00
Ex Tax:€9.92
Model: INR18650-28HE
These Tenpower Li-ion 18650 cells can be used in various applications.
Note: This battery is "bare" and does not contain protection against too high currents, deep discharge or too high a charging voltage. Purchase this battery only if you underst..
€3.25
Ex Tax:€2.69
Model: TP4056PROTECT
A li-ion charger with micro-USB connection in combination with a li-ion protection circuit for too high discharge currents or too low a battery voltage.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% ac..
€2.00
Ex Tax:€1.65
Model: TP4056
A fairly simple li-ion charger with mini-USB connection.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% accuracy)
Input voltage: 4.5V-5.5V
Two LED's indicating the status of loading
Mini-USB input..
€1.50
Ex Tax:€1.24
Model: TP4056PROTECTUSB-C
A li-ion charger with USB-C connection in combination with a li-ion protection circuit for too high discharge currents or a low battery voltage.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% accuracy)
..
€2.50
Ex Tax:€2.07