Menu
Your Cart

Mechanics and Actuators

Model: LV8729DRIVERMOD
This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer. This is a quieter variant for the standard A4988 module. Specifications: Voltage range (VM): 6-36V Voltage range (VIO): 3.3-5V ..
€8.00
Ex Tax:€6.61
Model: M5STACK-K050 Brand: M5Stack
The Atom H-Driver Kit is an H-bridge motor driver module based on a DRV8876. The kit consists of two parts: An M5Stack Atom Lite and the H-Driver module. With this module a DC motor or other resistive or inductive load can be switched. Specificati..
€18.00
Ex Tax:€14.88
Model: M5STACK-K073 Brand: M5Stack
..
€39.00
Ex Tax:€32.23
M5STACK Catch Unit - Robot Gripper - SG92R Servo
2-4 Weeks
Model: M5STACK-U102 Brand: M5Stack
The Catch Unit is a robotic gripper from M5STACK. With a single servo and a gear mechanism, both arms of the gripper are moved. The unit has several places with which it can be attached to LEGO®. Specifications: Supply voltage: 4.2-6V DC S..
€6.00
Ex Tax:€4.96
Model: M5STACK-M025-B Brand: M5Stack
The GoPlus2 from M5Stack is a DC motor and servo driver that is controlled by an STM32F030 chip. This module contains 2 DC motor ports, and 4 servo motor ports. In addition, the GoPlus2 also has 3 Grove-B (GPIO) ports, and it is possible to receive a..
€25.00
Ex Tax:€20.66
Model: M5STACK-M035 Brand: M5Stack
This is a stepper motor module for the M5Core with three stepper motor drivers and the possibility to connect three end stops. There are also additional modules available such as a 5V fan module to cool down the drivers. Specifications: S..
€32.50
Ex Tax:€26.86
Model: M5STACK-M021 Brand: M5Stack
The LEGO+ Module a motor driver especially for LEGO® motors. The module can control a total of 4 LEGO® motors. The module also has an XT30 connector to power the module. Specifications: Input voltage: 6-12V DC I2C address: 0x56 M..
€13.50
Ex Tax:€11.16
Model: M5STACK-K036-B Brand: M5Stack
There is no product description available yet. See the following page for information about this product: M5STACK RoverC Pro Hat - for M5StickC Note: This product does not have a protection circuit for the 16340 Li-ion battery. Therefore, always t..
€78.00
Ex Tax:€64.46
Model: M5STACK-U075 Brand: M5Stack
The M5STACK Servo Hat is add-on module for the M5StickC*. The module contains a PWM controlled ES9251II servo and can be attached at the top of a M5StickC. This Hat is programmable with Arduino and UIFlow (Blockly, Python). For more information, s..
€12.00
Ex Tax:€9.92
Model: M5STACK-A076-B Brand: M5Stack
A kit of M5Stack consisting of 2 servos and all kinds of (LEGO®) accessories. With this kit you can easily incorporate 2 servos into your LEGO®/M5Stack project. For more information, see: M5Stack Servo Kit 180°/360°. Note: If the servo has less..
€16.50
Ex Tax:€13.64
Model: M5STACK-A076-C Brand: M5Stack
A kit of M5Stack consisting of 2 servos and all kinds of (LEGO®) accessories. With this kit you can easily incorporate 2 servos into your LEGO®/M5Stack project. For more information, see: M5Stack Servo Kit 180°/360°...
€13.50
Ex Tax:€11.16
Model: M5STACK-M014-B Brand: M5Stack
This is a servo driver module for the M5Core that can control up to 16 different servo motors. The module has a built-in voltage converter that brings the input voltage to the correct servo voltage. Specifications: Input voltage: 6-12V DC (v..
€17.00
Ex Tax:€14.05
Model: M5STACK-A076 Brand: M5Stack
A standard SG90 servo from M5Stack. This servo is very easy to control. For more information, see: M5Stack SG90 Servo. Note: If the servo has less than 180 degrees range, the minimum (500us) and maximum pulse width (2500us) must be adjusted in ..
€7.50
Ex Tax:€6.20
Model: M5STACK-M039 Brand: M5Stack
..
€36.50
Ex Tax:€30.17
Model: M5STACK-U059 Brand: M5Stack
This is a module with vibration motor and a Grove connection for the M5Stack. See the following page for more information: M5STACK Vibrator Motor Unit...
€5.00
Ex Tax:€4.13
Model: M5STACK-U101 Brand: M5Stack
The Watering Unit from M5STACK is a capacitive soil moisture sensor module. In addition, this unit also contains a water pump that can be connected to a water source with the supplied hose. For example, with this module you can easily react to l..
€15.00
Ex Tax:€12.40
Model: MG90S
A nice servo to begin with. You can already perform quite some movements with it! This servo is very easy to control. The MG90S is almost the same as the SG90, but has metal gears for more speed and power. Note: If the servo has less than 180 degr..
€5.00
Ex Tax:€4.13
Model: MG996R
A fairly powerful servo that is easy to control and largely compatible with the TowerPro MG996R servo. There are a couple of pieces of plastic that you can mount on it, where you can then mount other things on. Note: This servo can draw relatively..
€7.00
Ex Tax:€5.79
Model: MG996R-CONT
A fairly powerful servo that is easy to control and largely compatible with the TowerPro MG996R servo. There are a couple of pieces of plastic that you can mount on it, where you can then mount other things on. Note: This servo can draw relatively..
€7.00
Ex Tax:€5.79
Model: MX1508MOD
This small module can control two DC motors. Specifications: Supply voltage: 2 - 9.6V DC Signal voltage: 3.3 - 5V Maximum continuous current per bridge: 1.5A Maximum peak current per bridge: 2.5A Number of channels: 2 Mounting hole..
€2.50
Ex Tax:€2.07
Model: NEO12X5-4MMCS
A strong neodymium magnet with a countersunk mounting hole to securely mount the magnet. Specifications: Type of magnet: Neodymium Materials magnet: Neodymium, Iron and Boron (NdFeB) Plating material: Nickel Magnet quality: N33 Maxim..
€1.00
Ex Tax:€0.83
Model: NEO15X5-4MMCS
A strong neodymium magnet with a countersunk mounting hole to securely mount the magnet. Specifications: Type of magnet: Neodymium Materials magnet: Neodymium, Iron and Boron (NdFeB) Plating material: Nickel Magnet quality: N33 Maxim..
€1.10
Ex Tax:€0.91
Model: NEO2*10
A standard neodymium magnet for eg. a reed relay. Format is 10mm in diameter and 2 mm in hight. Note: Neodymium is quite a brittle material, so be careful for hard bounces against magnetic materials...
€0.60
Ex Tax:€0.50
Model: NEO25X2
A super strong neodymium magnet with an adhesive strip on one side for easy mounting. Specifications: Type of magnet: Neodymium Materials magnet: Neodymium, Iron and Boron (NdFeB) Plating material: Nickel Magnet quality: N35 Maximum ..
€1.20
Ex Tax:€0.99
Model: NEO8X3-3MMCS
A strong neodymium magnet with a countersunk mounting hole to securely mount the magnet. Specifications: Type of magnet: Neodymium Materials magnet: Neodymium, Iron and Boron (NdFeB) Plating material: Nickel Magnet quality: N33 Maxim..
€0.60
Ex Tax:€0.50
Model: OS-OMNIDIRCARKITDIY
A DIY car kit from Open-Smart with omnidirectional wheels. With these wheels it is possible to make many more types of movements, for example lateral movements, than with traditional wheels. This kit contains all the stuff you need (except for the ba..
€50.00
Ex Tax:€41.32
Model: OS-VIBDCMOTORMOD
A vibration (DC) motor module from Open-Smart. The module can be easily connected through the 3p header. In addition, the module has 4 mounting holes for easy mounting. Note: The motor is only secured with an adhesive layer. In situations where th..
€3.00
Ex Tax:€2.48
Model: TEC1-12706
A Peltier element with wires, this element can be used for heating and cooling purposes. Or can be used to harvest energy from temperature differences. The element has a hot and a cold side. Note: The hot side needs to be cooled properly to prevent ..
€4.00
Ex Tax:€3.31
Model: VM-TC78020N
A compact fan heater with three settings (fan only, half power and full power). With the rotary knob a temperature limit can be set, if the temperature rises above that, the heater switches off automatically. Note: During the first use, a plastic ..
€24.50
Ex Tax:€20.25
Model: PIEZOMIST
This piezo disc can be used with the ultrasonic fog module, or possibly with another amplifier, to create fog. Specifications: Voltage: 3 - 12V Maximum power: 1.5W Resonance frequency: 110KHz ±10% Size mist droplets: 5 ~ 10micron ..
€0.80
Ex Tax:€0.66
Model: PWMCONTBOARD
A PWM controller with MOSFET and easy to use potentiometer to, for example, easily control a DC motor (speed) or LED (dimming). The names of the connections are visible on the printed circuit board. Specifications: Voltage range: 4.5-28V ..
€3.50
Ex Tax:€2.89
Model: QHV5160DRIVERMOD
This stepper motor driver is intended for motors with a larger power and current, suitable for NEMA17 and NEMA23, among others. This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer. Compared to ..
€21.50
Ex Tax:€17.77
Model: RPIHEATSINKKIT
A set of cooling blocks to provide your Raspberry Pi with a little extra cooling. This set consists of three cooling blocks incl. adhesive layer for easy placement of the cooling blocks. Specifications: Material: Aluminum Dimensions: ..
€0.80
Ex Tax:€0.66
Model: WS-17790
A set of heat sinks to provide your Raspberry Pi with a little extra cooling. This set consists of three heat sinks with an adhesive layer for easy placement of the cooling blocks. Dimensions per colored heat sinks (approximately): ..
€1.50
Ex Tax:€1.24
Robobloq Coding Express - Smart Toy Train
New
Model: RB-00010A Brand: Robobloq
This by stickers 'programmable' toy train is the perfect educational toy for kids who love trains and creativity by introducing them to the world of programming. By sticking the different colored stickers on the track you program the train so that it..
€39.50
Ex Tax:€32.64
Robobloq Qoopers - 6-in-1 Programmable Robot DIY Kit
New
Model: RB-00001 Brand: Robobloq
..
€140.00
Ex Tax:€115.70
Model: RTKRPIMOTORCONTR
With this HAT for the Raspberry Pi you can control two DC motors. Specifications: Input voltage: 4-36V (max 12V recommended due to heat development) Maximum current: 1A SN754410 Driver PWM control possible to control the speed See..
€13.00
Ex Tax:€10.74
RZ7886 DC Motor Driver 7A - 8-pin DIP
New
Model: RZ7886
With this DC motor driver you can easily control a motor in two directions. The built-in flyback diodes protect the chip from inductive loads, such as the coils of a motor...
€1.25
Ex Tax:€1.03
Model: S3003
A reasonably powerful servo that is easy to operate. There are some plastic pieces provided that you can mount on it, where you can mount other things on. Note: This servo can draw relatively high currents, especially with load (up to approximatel..
€6.00
Ex Tax:€4.96
Model: S3003-CONT
A reasonably powerful servo that is easy to operate. There are some plastic pieces provided that you can mount on it, where you can mount other things on. Note: This servo can draw relatively high currents, especially with load (up to approximatel..
€6.00
Ex Tax:€4.96
Model: SCS12UU
A linear bearing of the SCS12UU type. This linear bearing has a flat surface with screw holes. Specifications: Internal diameter: 12mm Dimensions: See images Thread type: M5 Weight: approx. 102 grams Note: The linear bearings are ..
€3.50
Ex Tax:€2.89
Model: SCS8UU
A linear bearing of the SCS8UU type. This linear bearing has a flat surface with screw holes. Specifications: Internal diameter: 8mm Dimensions: See images Thread type: M4 Weight: approx. 46 grams Note: The linear bearings are lub..
€2.50
Ex Tax:€2.07
Model: SEEED-316010005
A simple servo from Seeed Studio. This servo has a cable with a Grove connector, so you can easily connect this servo to other Seeed Studio products. See the following page for more information: Seeed Studio Grove Servo...
€9.00
Ex Tax:€7.44
Model: SERVODISC25T
A standard metal servo disc suitable for usage with MG995/MG996 type servo's(25T). You can mount four M3 bolts on the disc.(four small bolts included) The exact dimensions can be found in the images...
€0.50
Ex Tax:€0.41
Model: SERVOGRIPPER
This aluminum mechanical robot gripper can be used to grab and move small objects around. With mounting holes for a servo motor. Specifications: Weight: 68 g (without servo) Maximum gripper width: 55 mm Two 3mm holes for mounting the gri..
€6.00
Ex Tax:€4.96
Model: SERVOTESTER
With this servo driver you can easily test the correct operation of servo's. The servo tester can test in 3 different methods (choose by 'select' button') : Manual mode: By adjusting the rotary knob the speed can be adjusted Neutral mode: The..
€3.00
Ex Tax:€2.48
Model: SG90
A nice servo to begin with. You can already perform quite some movements with it! This servo is very easy to control. Note: If the servo has less than 180 degrees range, the minimum (500us) and maximum pulse width (2500us) must be adjusted in the ..
€3.25
Ex Tax:€2.69
Model: SG92R
A nice servo to begin with, this is an improved version of the SG90. You can already perform quite some movements with it. This servo is very easy to control. There are some plastic adapter pieces included to suit your mechanical needs. Note: If t..
€4.50
Ex Tax:€3.72
Model: SHOCKABSNEMA17
This shock absorber is suitable for stepper motors with 42 x 42mm dimensions. (eg NEMA17 motors) The shock absorber consists of metal with rubber. Please note: No mounting hardware is included with this shock absorber! In addition, the appearan..
€3.00
Ex Tax:€2.48
Showing 101 to 150 of 231 (5 Pages)
1
false
true
true
Remove
Change
tr