Menu
Your Cart

Mechanics and Actuators

Model: JF-XP2520-24V
An electromagnet that you can use, for example, to make a lock. This electromagnet is very simple to use, you simply offer a voltage (see specifications) and the electromagnet turns on, the polarity does not matter. As soon as the voltage is removed ..
€6.00
Ex Tax:€4.96
Model: FAN30307DUPONT
This fan is specially made for our Raspberry Pi cases with fan option, but can also be used separately for other projects...
€2.50
Ex Tax:€2.07
Model: FAN30307JSTRCY
This fan is specially made for our Raspberry Pi cases with fan option, but can also be used separately for other projects...
€2.50
Ex Tax:€2.07
Model: FIXEDCOUPLER5-5MM
This fixed motor coupler is suitable for a coupling between two 5mm shafts. The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: FIXEDCOUPLER5-8MM
This fixed motor coupler is suitable for a coupling between a 5mm shaft and 8mm shaft. The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: FIXEDCOUPLER8-8MM
This fixed motor coupler is suitable for a coupling between two 8mm shafts. The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: FLEXCOUPLER5-8MM
This flexible motor coupler is suitable for a coupling between a 5mm shaft and 8mm shaft. The coupling is 25mm high and 19mm in diameter. There are four screws supplied to mount the coupler...
€2.50
Ex Tax:€2.07
Model: FLEXCOUPLER8-8MM
This flexible motor coupler is suitable for a coupling between two 8mm shafts. The coupling is 25mm high and 19mm in diameter. There are four screws supplied to mount the coupler...
€2.50
Ex Tax:€2.07
Float Valve - 90° - G1/2"
New
Model: FLOATVALVE90
A float valve that can be used, for example, to keep a water reservoir leveled. As soon as the water level reaches halfway the float, the internal valve will close. Note: We cannot give any warranty if this product is used with any liquid other th..
€4.50
Ex Tax:€3.72
Float Valve - G1/2"
New
Model: FLOATVALVE180
A float valve that can be used, for example, to keep a water reservoir leveled. As soon as the water level reaches halfway the float, the internal valve will close. Note: We cannot give any warranty if this product is used with any liquid other th..
€4.50
Ex Tax:€3.72
Float Valve with External Inlet - 90° - G1/2"
New
Model: FLOATVALVE90EX
A float valve that can be used, for example, to keep a water reservoir leveled. As soon as the water level reaches halfway the float, the internal valve will close. This variant has an external connection to connect the float. This allows the float v..
€4.50
Ex Tax:€3.72
Float Valve with External Inlet - G1/2"
New
Model: FLOATVALVE180EX
A float valve that can be used, for example, to keep a water reservoir leveled. As soon as the water level reaches halfway the float, the internal valve will close. This variant has an external connection to connect the float. This allows the float v..
€4.50
Ex Tax:€3.72
Model: GT2PULLEY16T5MM
This pulley is suitable for GT2 timing belts and motors with an axle of 5mm. Specifications: Timing belt type: GT2 Timing belt width (max): 7mm Number of teeth: 16 Diameter axle: 5mm Comes with two screws to attach axle..
€2.50
Ex Tax:€2.07
GT2 Pulley - 20 teeth - 5mm axle
2-4 Weeks
Model: GT2PULLEY20T5MM
This pulley is suitable for GT2 timing belts and motors with an axle of 5mm. Specifications: Timing belt type: GT2 Timing belt width (max): 7mm Number of teeth: 20 Diameter axle: 5mm Comes with two screws to attach axle..
€2.50
Ex Tax:€2.07
Model: GT2PULLEY20T8MM
This pulley is suitable for GT2 timing belts and motors with an axle of 8mm. Specifications: Timing belt type: GT2 Timing belt width (max): 7mm Number of teeth: 20 Diameter axle: 8mm Comes with two screws to attach axle..
€2.50
Ex Tax:€2.07
Model: GT2-BELT-110MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 110mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€2.50
Ex Tax:€2.07
Model: GT2-BELT-158MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 158mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€2.50
Ex Tax:€2.07
Model: GT2TIMINGBELT6MM
This timing belt is suitable for GT2 pulleys with a minimum width of 6mm. Specifications: Timing belt type: GT2 Timing belt width: 6mm Sold per meter with two loose ends Note: This product may be sold in one meter pieces. If you wan..
€2.00
Ex Tax:€1.65
Model: GT2-BELT-200MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and has a length of 200mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT..
€2.75
Ex Tax:€2.27
Model: GT2-BELT-280MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 280mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€2.75
Ex Tax:€2.27
Model: GT2-BELT-300MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 300mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€3.00
Ex Tax:€2.48
Model: GT2-BELT-320MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 320mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€3.00
Ex Tax:€2.48
Model: GT2-BELT-400MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 400mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€3.50
Ex Tax:€2.89
Model: GT2-BELT-610MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 610mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€4.00
Ex Tax:€3.31
GT2 Timing Belt - 6mm - 852mm - Closed
2-4 Weeks
Model: GT2-BELT-852MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 852mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€4.50
Ex Tax:€3.72
Model: GT2316T
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm. Specifications: 16 Teeth Inner diameter 3mm Outer diameter: 13mm Height: 8.5mm Suitable for belts of 6mm See image for the exact dimensions...
€1.50
Ex Tax:€1.24
Model: GT2316S
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm. Specifications: Toothless, but has the same diameter as a GT2-16 with 16 teeth pulley Inner diameter 3mm Outer diameter: 13mm Height: 8.5mm Suitable for ..
€1.50
Ex Tax:€1.24
Model: GT2520T
A GT2 belt pulley with an internal roller bearing and an inner diameter of 5mm. Specifications: 20 Teeth Inner diameter 5mm Outer diameter: 18mm Height: 8.5mm Suitable for belts of 6mm See image for the exact dimensions...
€1.50
Ex Tax:€1.24
Model: GT2320T
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm. Specifications: 20 Teeth Inner diameter 3mm Outer diameter: 18mm Height: 8.5mm Suitable for belts of 6mm See image for the exact dimensions...
€1.50
Ex Tax:€1.24
Model: GT2320S
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm. Specifications: Toothless, but has the same diameter as a GT2-20 with 20 teeth pulley Inner diameter 3mm Outer diameter: 18mm Height: 8.5mm Suitable for ..
€1.50
Ex Tax:€1.24
Model: GT2520S
A GT2 belt pulley with an internal roller bearing and an inner diameter of 5mm. Specifications: Toothless, but has the same diameter as a GT2-20 with 20 teeth pulley Inner diameter 5mm Outer diameter: 18mm Height: 8.5mm Suitable for ..
€1.50
Ex Tax:€1.24
Model: COOL11x11
Suitable for providing small chips with a little air cooling. Material is aluminum in combination with a black thermally conducting adhesive layer of 3M...
€0.40
Ex Tax:€0.33
Model: HEATSINKLED1-3W
This cooling block is required if you want to use the corresponding 1W to 3W LED at full brightness. These LEDs produce a lot of heat, which has to be cooled. The LED can be soldered to the cooling block. Try to place the LED as close to the cool..
€0.20
Ex Tax:€0.17
Model: HY-DIV268N-5A
Easy to set stepper motor control for a bipolar stepper motor .  Specifications: Voltage range (power supply): 8-42VDC (12-36V recommended) Voltage range (signals): 2.0-5.5V Maximum peak current per bridge (adjustable via dipswitch)..
€14.00
Ex Tax:€11.57
Model: KFL8
Mounting for rotating 8mm shaft. Used for the Z-axis of a 3D printer or CNC machine. Specifications: Dimensions: 48x27x11.2mm Inner diameter: 8mm Mounting hole: M5 See images for the exact dimensions...
€2.50
Ex Tax:€2.07
Model: KP08
Mounting for rotating 8mm shaft. Used for the Z-axis of a 3D printer or CNC machine. Specifications: Dimensions: 55x30x12mm Inner diameter: 8mm Mounting hole: M5 See images for the exact dimensions...
€2.50
Ex Tax:€2.07
Model: L293D
A commonly used motor driver with built-in H-bridges to control, for example, two DC motors or a (small) stepper motor. See the datasheet for more information...
€1.75
Ex Tax:€1.45
Model: MOTORSHIELD
This shield is based on an Adafruit shield and offers control for two servo motors and four DC motors or two bipolar/unipolar stepper motors. The shield has a shift register built in which can save a large number of pins. Specifications: ..
€5.00
Ex Tax:€4.13
Model: L298N
A motor controller for two DC motors. Specifications: Voltage range (signals): 0-5V Voltage range (power supply for the motors): 5-35V DC Maximum current (per bridge): 2A See the following page for a tutorial: Arduino Modules - L298..
€5.00
Ex Tax:€4.13
Model: L9110S
A motor controller for two DC motors or one bipolar stepper motor, consisting of two L9110S chips. The names of the connections are visible on the PCB. See the datasheet under the tab "Downloads" for more information...
€3.50
Ex Tax:€2.89
Model: LIGHTSLOTSENSORCARKIT
Two light slot sensor modules for the DIY car kits. With these modules the speed of the wheels can be measured. These light sensors have a small piece in which the light is sent to a phototransistor. The phototransistor then responds to this when ..
€4.50
Ex Tax:€3.72
Model: LILYGO-H530
The TTGO T-Motor from LilyGO is a microcontroller based on an ESP32 with a TMC2209 stepper motor driver and a magnetic encoder, making it suitable for use as a closed-loop stepper motor driver. The T-Motor can be easily mounted on a NEMA17 motor with..
€27.50
Ex Tax:€22.73
Model: LILYGO-H247
The LilyGO T-Thruster is a kit based on an ESP8266 microcontroller and two DC motors. The kit can be used to make a remote-controlled airplane, for example with styrofoam. See the following page to get started with T-Thruster and download the App,..
€11.00
Ex Tax:€9.09
Model: D2-1TRACKING-CARKITDIY
An intelligent DIY car kit that can follow a black colored line on the ground using 2 white LEDs and 2 photosensitive resistors. This car does not need to be programmed, and it is only necessary to solder all parts to the PCB mounting plate. The car ..
€9.00
Ex Tax:€7.44
Model: LM12LUU
A linear bearing of the LM12LUU type. This linear bearing is used to make the frame stiffer for example Anet A8 and DIY coreXY printers. Specifications: Internal diameter: 12mm External diameter: 21mm Dimensions: 21x21x57mm Weight..
€3.50
Ex Tax:€2.89
Model: LM12UU
A linear bearing of the LM12UU type. This linear bearing is used to make the frame stiffer for example Anet A8 and DIY coreXY printers. Specifications: Internal diameter: 12mm External diameter: 21mm Dimensions: 21x21x30 mm W..
€2.00
Ex Tax:€1.65
Model: LM6LUU
A linear bearing of the LM6LUU type. These linear bearings are used mostly in small 3D printers.  Specifications: Internal diameter: 6mm External diameter: 12mm Dimensions: 12x12x35mm Weight: ~12 grams Note: The linear bearin..
€2.50
Ex Tax:€2.07
Model: LM6UU
A linear bearing of the LM6UU type. These linear bearings are used mostly in small 3D printers.  Specifications: Internal diameter: 6mm External diameter: 12mm Dimensions: 12x12x19 mm Weight: ~6 grams Note: The linear bearing..
€1.00
Ex Tax:€0.83
Model: LM8LUU
A linear bearing of the LM8LUU type. These linear bearings are used in many different 3D printers. Specifications: Internal diameter: 8mm External diameter: 15mm Dimensions: 15x15x45mm Weight: approx. 26 grams Note: The linear bea..
€2.50
Ex Tax:€2.07
Model: LM8UU
A linear bearing of the LM8UU type. These linear bearings are used in many 3D printers, including the AnyCubic I3 Mega/Mega-S and the Prusa series.  Specifications: Internal diameter: 8mm External diameter: 15mm Dimensions: 15x15x24..
€1.00
Ex Tax:€0.83
Showing 51 to 100 of 231 (5 Pages)
1
false
true
true
Remove
Change
tr