LilyGO T-RGB ESP32-S3 - with 2.1 inch IPS Display en Touchscreen
- Availability: Directly available from warehouse in Eindhoven
- SKU: 004974
€37.00
Ex Tax: €30.58
A microcontroller with circular touchscreen display from LilyGO. It is easy to program, also like an Arduino.
Note: The display is not yet taped to the rest of the module. Carefully remove the module from its packaging by pulling the clear tab.
Note: Due to a built-in GPIO expander for the display driver, the display will not work with standard examples for the driver. So take a good look at the examples in the link below to get the display working.
See the following page for more information about this product: LilyGO T-RGB ESP32-S3 - with 2.1 inch IPS Display en Touchscreen
Reviews Over LilyGO T-RGB ESP32-S3 - with 2.1 inch IPS Display en Touchscreen
This product has 0 review(s) in total.
Report this review.
Tags:
LilyGO T-RGB ESP32-S3 - with 2.1 inch IPS Display en Touchscreen
, LILYGO-H583
, With Bluetooth
Specifications
General | |
Brand | LilyGO TTGO |
Manufacturer model/SKU | H583 |
Model revision | V1.2 |
Features | Battery charger Display Microcontroller Touchscreen SD-card adapter Programmable button(s) |
General physical appearance | |
Main color | Black |
Weight [g] | 44 |
Dimension X [mm] | 63 |
Dimension Y [mm] | 59 |
Form factor | Module (general) |
General electrical properties | |
Minimum supply voltage [V DC] | 5 (lower possible via Li-Po/Li-ion battery) |
Maximum supply voltage [V DC] | 5 |
Minimum IO-pin input voltage [V] | 3.3 |
Maximum IO-pin input voltage [V] | 3.3 |
IO-pin output voltage [V] | 3.3 |
Maximum IO-pin source current [mA] | 40 |
Maximum IO-pin sink current [mA] | 28 |
MCU/SoC | |
Manufacturer | Espressif |
Chip series | ESP32-S3 |
Maximum clock frequency [MHz] | 240 |
Number of cores | 2 |
Internal memory | |
SRAM [KB] | 512 |
PSRAM [MB] | 8 |
Flash memory [MB] | 16 |
EEPROM type | Emulated |
Communication | |
Hardware interface(s) | I2C I2S Native USB UART PWM ADC GPIO USB CDC |
Number of IO-pins | 2 |
Maximum available hardware PWM channels | 2 |
Maximum available analog input pins (ADC) | 1 |
Maximum available analog output pins (DAC) | 0 |
Maximum available hardware UART interfaces | 1 |
Maximum available hardware I2C interfaces | 1 |
Maximum available hardware SPI interfaces | 0 |
Supported SD card size | Micro SD |
Wireless communication | |
Interface(s) | Wi-Fi Bluetooth |
Wi-Fi chip/SoC | ESP32-S3 |
Wi-Fi frequency [GHz] | 2.4 |
Bluetooth chip/SoC | ESP32-S3 |
Bluetooth version | 5.0 |
Supported Bluetooth standard(s) | LE |
Display | |
Type | IPS |
Driver | ST7701S |
Screen diagonal [inch] | 2.1 |
Number of pixels long side | 480 |
Number of pixels short side | 480 |
Display shape | Round |
Pixel colors | RGB |
Touchscreen | |
Touchscreen controller | FT3267 |
Touch type | Capacitive |
Multi-touch support | Yes |
Battery circuit | |
Battery charger chip/SoC | TP4065 |
Supported battery chemistry | Li-ion Li-Po |
Maximum charging voltage [V] | 4.2 |
Maximum charging current [mA] | 550 |
Adjustable charging current | No |
Protection circuit | No |
Connectors | |
Power supply connector(s) | USB-C female |
IO-connector(s) | HY2.0 (Grove) male USB-C female |
Battery connector(s) | Molex Picoblade (compatible) male |
Wi-Fi/Bluetooth antenna connector | Built-in antenna IPEX MHF 1/uFL male (requires modification) |
Package contents | |
Package contents | 1x LilyGO T-RGB 1x Battery cable |