Menu
Your Cart

Communication and Signals

Model: DFROBOT-DFR0504
..
€22.00
Ex Tax:€18.18
Model: DFROBOT-DFR0576
..
€8.50
Ex Tax:€7.02
Model: DFROBOT-DFR0565
..
€18.00
Ex Tax:€14.88
Model: DFROBOT-DFR0094
..
€4.50
Ex Tax:€3.72
Model: DFROBOT-DFR0095
..
€4.50
Ex Tax:€3.72
DFRobot Gravity I2C 12-Bit DAC Module
Unknown
Model: DFROBOT-DFR0552
..
€6.50
Ex Tax:€5.37
Model: DFROBOT-DFR0759
..
€2.50
Ex Tax:€2.07
DFRobot Gravity MCP23017 I2C 16 Digital IO Expansion Module
Unknown
Model: DFROBOT-DFR0077
..
€9.00
Ex Tax:€7.44
Model: DFROBOT-DFR0258
..
€11.00
Ex Tax:€9.09
Model: DFROBOT-DFR0259
..
€11.00
Ex Tax:€9.09
DFRobot Self-powered Wireless Switch - 433MHz
New
Model: DFROBOT-TEL0146
..
€12.00
Ex Tax:€9.92
Digi XBee3 Zigbee 3.0 Module - uFL connector
Unknown
Model: XB3-24Z8UT-J
An XBee3 Zigbee 3.0 module with an uFL connector to connect an antenna (antenna is not included). Compatible with the Xbee V3 Arduino Adapter Shield to connect to an Arduino. Specifications: Type: XB3-24Z8UT-J Data rate: 25..
€28.00
Ex Tax:€23.14
Model: ABT-ECAT-SHIELD
The EasyCat Shield is an EtherCat shield that can be used to make an EtherCat Slave from an Arduino. EtherCat is a modification of the well-known Ethernet protocol and offers the possibility to connect a bus of devices. Watch this video for a short ..
€72.00
Ex Tax:€59.50
Model: ABT-ECAT-GATEWAY
The EasyCat Gateway is a device that can exchange data between an EtherCat bus and a USB Host or Ethernet network. EtherCat is a modification of the well-known Ethernet protocol and offers the possibility to connect a bus of devices. Watch this vide..
€105.00
Ex Tax:€86.78
Model: EM4100TAG
EM4100 key tag for the RDM630 RFID reader. Frequency: 125kHz Color: Blue..
€0.80
Ex Tax:€0.66
Model: ES9023DAC
A DAC module that operates on the I2S (inter-IC sound) interface, suitable to convert a digital audio signal to an analog signal. Operates on a 5V input voltage. Specifications: Input voltage: 5VDC Samplerate: 192 KHz Chip: ES9023 of ES9..
€13.00
Ex Tax:€10.74
Model: ESPLINKV1.0
This ESP LINK can be used for firmware upgrades, serial port debugging and programming the ESP8266 ESP-01(S). This ESP LINK is supported by the "Arduino IDE", "ESP8266Flasher" and "Espressif Flash Download Tools". The ESP8266 ESP-01(S) can go directl..
€4.00
Ex Tax:€3.31
Model: ESP-PROG
This ESP Programmer is a handy module for programming and debugging an ESP32 or ESP8266. In addition, the JTAG debugging function is available for ESP32. The programmer is easy to connect to a computer using the Micro USB port. This ESP programmer ha..
€18.50
Ex Tax:€15.29
Model: ESP32-WROVERIPEXANT
This ESP32-WROVER WiFi module is an ESP32 based module with WiFi and Bluetooth. This module features the ESP32 REV1 chip (240Mhz dual core processor) with 4MB SPI flash and 4MB PSRAM memory. For more information see the datasheet under the t..
€7.00
Ex Tax:€5.79
Model: ESP32-WROVERPCBANT
This ESP32-WROVER WiFi module is an ESP32 based module with WiFi and Bluetooth. This module features the ESP32 REV1 chip (240Mhz dual core processor) with 4MB SPI flash and 4MB PSRAM memory. For more information see the datasheet under the t..
€5.50
Ex Tax:€4.55
Model: ESP8266-01-1M
This module offers you the possibility to connect your Arduino to WiFi for a very low price. The ESP8266 module works with the normal UART port on your Arduino and can connect to networks, form your own network (hot spot) or both. The possibilitie..
€4.00
Ex Tax:€3.31
Model: ESP-01S
This module offers you the possibility to connect your Arduino to WiFi for a very low price. This "S" version of the ESP-01 module has minor improvements in the PCB compared to the normal ESP-01 module. The ESP8266 module works with the normal UAR..
€4.00
Ex Tax:€3.31
Model: ESP8266-07S-4M
This ESP-07S is a version of the ESP8266 module series with 4MB memory and has an uFL connector on board for an external WiFi antenna. (this has to be purchased separately!) This module offers you the possibility to connect your Arduino to WiFi fo..
€5.00
Ex Tax:€4.13
Model: ESP8266-12F-4M
This module offers you the possibility to connect your Arduino to WiFi for a very low price. The ESP8266 module works with the normal UART port on your Arduino and can connect to networks, form your own network (hot spot) or both. The possibilitie..
€5.00
Ex Tax:€4.13
Model: ESP8266-12S-4M
This ESP-12S is an improved model with respect to the ESP-12F module, but is not a direct replacement in connection with the missing pins at the bottom of the module. Since these pins are not used in most cases, it is in most cases a replacement for ..
€5.50
Ex Tax:€4.55
Model: ENC28J60
This ethernet module can be connected to eg an Arduino Uno or Arduino Mega. The names of the pins are listed on the PCB. Specifications: Voltage: 3.3V DC Control: SPI Dimensions: 48.8 x 18.5mm For more information see this tutoria..
€6.50
Ex Tax:€5.37
Model: ENC28J60MOUNT
This module can be connected to eg an Arduino Uno or Arduino Mega. The names of the pins are listed on the PCB. Specifications: Voltage: 3.3V DC Control: SPI Has four 3mm holes for mounting Dimensions: 56 x 34mm For more informat..
€5.50
Ex Tax:€4.55
Model: W5100
You can easily use this shield on an Arduino Uno (5V), Arduino Mega (5V), Arduino Due (3.3V), etc. You can connect a micro SD card to store files such as images. For example, these images can be incorporated into a website. There are different versio..
€14.50
Ex Tax:€11.98
Model: FMAMANTEXT
This FM/AM antenna is extendable and can be tilted. In addition, it has a hole with which it can be mounted. Dimensions: Length of antenna (extended): ~230mm Diameter: 6mm For other dimensions, see the images..
€2.50
Ex Tax:€2.07
Model: FSC-BT836B-PCB
The Feasycom BT836B is a dual mode (BR/EDR+BLE) Bluetooth 5.0 module that can be used for high speed data transfers. It supports SPP, HID, GATT, ATT, GAP. Furthermore, this module supports MFi, Airsync, iBeacon and OTA (Over-the-air) u..
€8.00
Ex Tax:€6.61
Model: FSC-DB004-BT616
The Feasycom BT616 is a dual mode (BR/EDR+BLE) Bluetooth 5.0 module that can be used for high speed data transfers. It supports GATT, ATT, GAP, SMP, L2CAP. Furthermore, this module supports MFi and OTA (Over-the-air) upgrade. Specif..
€6.00
Ex Tax:€4.96
Model: FSC-DB004-BT646
The Feasycom BT646 is a single mode bluetooth BLE 4.2 module. It can be used as an application processor or data pump in a fully hosted system. Specifications: Supply voltage: 3.6 - 6V Data voltage: 3.3V UART interface (RX and TX) Dime..
€4.50
Ex Tax:€3.72
Model: FSC-DB004-BT826E
The Feasycom BT826 is a dual mode (BR/EDR+BLE) Bluetooth 4.2 module (HC-05 compatible). It supports SPP, BLE, ANCS, iBeacon and more.  Specifications: Supply voltage: 3.6 - 6V DC Data voltage: 3.3V UART interface (RX and TX) ..
€6.00
Ex Tax:€4.96
Model: FSC-DB004-BT836
The Feasycom BT836 is a dual mode (BR/EDR+BLE) Bluetooth 4.2 module. It supports SPP, HID, GATT, ATT, GAP. Furthermore, this module supports Apple MFi (iAP2), iBeacon. Specifications: Supply voltage: 3.6 - 6V DC Data voltage: 3.3V U..
€7.00
Ex Tax:€5.79
Feasycom DB004-BT836B Bluetooth 5.0 Module
2-4 Weeks
Model: FSC-DB004-BT836B
The Feasycom BT836B is a dual mode (BR/EDR+BLE) Bluetooth 5.0 module that can be used for high speed data transfers. It supports SPP, HID, GATT, ATT, GAP. Furthermore, this module supports MFi, Airsync, iBeacon and OTA (Over-the-air) u..
€7.50
Ex Tax:€6.20
Model: FT232USBCABLE
You can call it the most reliable USB to serial converter that you can find! Many operating systems support this standard chip. If it does not install automatically, then look for the driver for your operating system here . Specifications: ..
€11.00
Ex Tax:€9.09
Model: FT232USB
The most reliable usb to serial converter that you can find! This is almost indispensable if you want to be able to program Pro Mini (automatically) . Many operating systems support this chip by default. If it is not automatically installed, pleas..
€8.50
Ex Tax:€7.02
Model: GPSANTSMAUFLADAP
Specifications: Connector type: SMA (uFL/I-PEX adapter included) Input voltage: 3 - 5 VDC Gain: 5dBi Impedance: 50 Ohm Frequency range: CF (+/- 8 MHz) Cable length: ~3m Build-in magnet for mounting..
€5.50
Ex Tax:€4.55
Model: GPSANTUFLPCB
Specifications: Connector type: uFL (I-PEX) Gain: 3dBi Voltage: 3-5V DC Impedance: 50 Ohm Frequency range: CF 1575 MHz (+/- 30 MHz) Dimensions: 28x28x8.5mm Cable length: ~5cm..
€3.50
Ex Tax:€2.89
Model: GSMANTQBHELIX
Specifications: Gain: 2-3dBi Impedance: 50 Ohm Frequency range: 824MHz - 960 Mhz ofr1710 MHz - 1990MHz Length total: 24mm Diameter: 5mm..
€0.50
Ex Tax:€0.41
Model: GSMPCBANTQBUFL
Specifications: Connector type: uFL (I-PEX) Gain: 3dBi Impedance: 50 Ohm Frequency range: 800MHz - 960 Mhz of 1710 MHz - 2170MHz Length total: 15cm Adhesive strip for mounting..
€0.75
Ex Tax:€0.62
Model: GT-24-WLMOD-MINI
A wireless RF transceiver module that uses the 2.4GHz band and has a range of up to 1000 meters. This module is comparable to the NRF24L01+ module that we already sell, but the GT-24 has an additional power amplifier (PA) and low noise amplifier (LNA..
€4.00
Ex Tax:€3.31
Model: GT-24-WLMOD
A wireless RF transceiver module that uses the 2.4GHz band and has a range of up to 1000 meters. This module is comparable to the NRF24L01+ module that we already sell, but the GT-24 has an additional power amplifier (PA) and low noise amplifier (LNA..
€4.00
Ex Tax:€3.31
Model: GT-24-WLMOD-SHEADERS
A wireless RF transceiver module that uses the 2.4GHz band and has a range of up to 1000 meters. This module is comparable to the NRF24L01+ module that we already sell, but the GT-24 has an additional power amplifier (PA) and low noise amplifier (LNA..
€4.00
Ex Tax:€3.31
Model: GY-NEO6MV2
A GPS module that works with UART (TX and RX) signals. The required GPS antenna is supplied with the module. Specifications: Voltage range: 3.3-5V DC Voltage TX and RX signals: 3.3V (note: use a level converter for the RX signal if you hav..
€13.00
Ex Tax:€10.74
Model: HC-11
A wireless UART module that operates on 433 MHZ. This module can be used to transfer data wireless by serial communication. A compatible antenne is included. Specifications: Input voltage: 3.3 - 5 VDC Current usage: 3.4 mA (in "FU1" m..
€4.50
Ex Tax:€3.72
Model: HC-12
With the HC-12 module you can send data between two devices at a great distance. The module is equipped with an SI4463 Transceiver IC in combination with a STM8 microcontroller. Communication via an Arduino is very easy via UART (RX and TX) signals..
€8.00
Ex Tax:€6.61
Model: HC4067MOD
With this module you can determine with four addresspins(S0-S3) which of the 16 pins (C0-C15) is ultimately connected to the signal (SIG) pin. This way, with four digital pins and an analog pin, a total of 16 analog pins can be measured by alternatin..
€2.50
Ex Tax:€2.07
HL-340 USB to RS232 Adapter with cable
2-4 Weeks
Model: HL-340
A USB to RS232 adapter with the CH340 chip. The USB cable is ~80cm long. The drivers can be found here: Windows Driver Mac OSX Driver Linux Driver Android Driver Note: users report that the driver for Mac on both old and new co..
€5.00
Ex Tax:€4.13
Showing 51 to 100 of 259 (6 Pages)
1
false
true
true
Remove
Change
tr