Menu
Your Cart

Cables and Connectors

Model: RPICAMFPC50CM
This FFC flex cable can be used in combination with the most camera's for the Raspberry Pi using the standard camera interface (CSI) (not in combination with the Raspberry Pi Zero!)..
€3.00
Ex Tax:€2.48
Model: RPIHDMITOMHDMI-1M
An HDMI to micro HDMI cable from Raspberry Pi...
€6.25
Ex Tax:€5.17
Model: RPIZEROCAMFPC15CM
This FPC flex cable can be used in combination with the most camera's for the Raspberry Pi Zero using the narrowed camera interface (CSI)...
€3.00
Ex Tax:€2.48
Model: RCACONFEMALE-BLACK
An RCA/cinch connector for audio applications. The cables must be soldered on the inside of the connector...
€1.00
Ex Tax:€0.83
Model: CINCHMOUNTBLACK
An RCA/tulip/pin connector that can be soldered and mounted...
€1.00
Ex Tax:€0.83
Model: RCACONFEMALE-RED
An RCA/cinch connector for audio applications. The cables must be soldered on the inside of the connector...
€1.00
Ex Tax:€0.83
Model: CINCHMOUNTRED
An RCA/tulip/cinch connector that can be soldered and mounted...
€1.00
Ex Tax:€0.83
Model: RCACONMALE-BLACK
An RCA/cinch connector for audio applications. The cables must be soldered on the inside of the connector...
€1.00
Ex Tax:€0.83
Model: RCACONMALE-RED
An RCA/cinch connector for audio applications. The cables must be soldered on the inside of the connector...
€1.00
Ex Tax:€0.83
Model: RCACOUPLERFF-PLASTIC
An RCA/cinch coupler for audio applications...
€0.50
Ex Tax:€0.41
Model: RCABOARD
A small board with a RCA/Tulip female connector that can be placed between the audio input and the amplifier...
€2.50
Ex Tax:€2.07
Model: RCASPLITTERMDF-PLASTIC
An RCA/cinch/cinch splitter for splitting 1 audio signal into 2 signals. Note: It is not possible to use this splitter to combine 2 different signals...
€0.75
Ex Tax:€0.62
Model: 2PTERMPLUG
This screw terminal can be removed with an extra plug. This makes it easy to switch between different terminals without having to unscrew the terminals...
€1.00
Ex Tax:€0.83
Model: 4PTERMPLUG
This screw terminal can be removed with an extra plug. This makes it easy to switch between different terminals without having to unscrew the terminals...
€1.25
Ex Tax:€1.03
Model: REMSCREWT-3.81MM-2P
A removable screw terminal that can be easily inserted and removed from a terminal block...
€0.45
Ex Tax:€0.37
Model: REMSCREWT-3.81MM-3P
A removable screw terminal that can be easily inserted and removed from a terminal block...
€0.55
Ex Tax:€0.45
Model: REMSCREWT-3.81MM-4P
A removable screw terminal that can be easily inserted and removed from a terminal block...
€0.65
Ex Tax:€0.54
Model: REMSCREWT90-3.81MM-2P
A removable screw terminal that can be easily inserted and removed from a terminal block...
€0.65
Ex Tax:€0.54
Model: REMSCREWT90-3.81MM-3P
A removable screw terminal that can be easily inserted and removed from a terminal block...
€0.75
Ex Tax:€0.62
Model: REMSCREWT90-3.81MM-4P
A removable screw terminal that can be easily inserted and removed from a terminal block...
€0.85
Ex Tax:€0.70
Model: RINGLUG0.5-1.0MM2-M3
A ring cable lug that can be attached with a screw...
€0.15
Ex Tax:€0.12
Model: RINGLUG0.5-1.5MM2-M4
A ring cable lug that can be attached with a screw...
€0.15
Ex Tax:€0.12
Model: RINGLUG1.5-2.5MM2-M3
A ring cable lug that can be attached with a screw...
€0.15
Ex Tax:€0.12
Model: RINGLUG1.5-2.5MM2-M4
A ring cable lug that can be attached with a screw...
€0.15
Ex Tax:€0.12
Model: RJ12-6P-ADAP
This adapter can be used to connect your smart meter to an Arduino or to your Raspberry Pi or PC via USB in combination with a FT232 3.3-5V TTL USB Serial Port Adapter with Cable. See this pages for more information: Read smart meter (2) and P1..
€3.00
Ex Tax:€2.48
Model: SEEED-110990038
This is a Grove cable from Seeed Studio, for connecting Seeed Studio or other Grove modules. The connectors have a lock so that they do not come loose easily...
€5.50
Ex Tax:€4.55
Model: SEEED-110990028
This is a Grove to DuPont cable from Seeed Studio...
€5.50
Ex Tax:€4.55
Model: SRING-6.5MM-4W-1A
This slip ring makes it possible to connect cables to a rotating module without tangling the cables. For more information, see the datasheet under the tab "Downloads"...
€7.00
Ex Tax:€5.79
Model: SRING-6.5MM-8W-1A
This slip ring makes it possible to connect cables to a rotating module without tangling the cables. For more information, see the datasheet under the tab "Downloads"...
€10.00
Ex Tax:€8.26
Model: SRING-12.5MM-2W-5A
This slip ring makes it possible to connect cables to a rotating module without tangling the cables. For more information, see the datasheet under the tab "Downloads"...
€7.00
Ex Tax:€5.79
Model: SRING-12.5MM-4W-5A
This slip ring makes it possible to connect cables to a rotating module without tangling the cables. For more information, see the datasheet under the tab "Downloads"...
€14.25
Ex Tax:€11.78
Model: SMAF-UFLF-CABLE
A SMA female to uFL female cable...
€1.20
Ex Tax:€0.99
Model: SMAPCB1.6MMCON
This SMA connector can be soldered on the side of a 1.6 mm thick PCB...
€0.75
Ex Tax:€0.62
Model: SMAPCBCON90D
This right angle SMA connector can be soldered on a PCB...
€0.80
Ex Tax:€0.66
Socket Splitter Plug 2-way
New
Model: VM-EB2EU-G
A splitter plug with 2 sockets...
€4.50
Ex Tax:€3.72
Socket Splitter Plug 4-way
New
Model: VM-EB14
A splitter plug with 4 type C sockets...
€4.50
Ex Tax:€3.72
Socket Splitter with Switch - 2-way
New
Model: VM-EB2SWN-G
A splitter plug with 2 plug sockets and a switch...
€3.25
Ex Tax:€2.69
Socket Switch
New
Model: VM-EB1SWN-G
An electrical outlet adapter with a switch...
€2.50
Ex Tax:€2.07
Model: SONOFF-AL010
An adapter cable to connect old Sonoff sensors that have an audio jack to the new Sonoff TH Elite of TH Origin that have an RJ9 connector...
€2.25
Ex Tax:€1.86
Model: SONOFF-RL560
This extension cable has RJ9 connectors and is suitable for connecting sensors such as the Sonoff THS01 and Sonoff DS18B20 to Sonoff TH Elite or TH Origin...
€4.00
Ex Tax:€3.31
Model: SPKCABLERDBLK-0.75-10M
Standard speaker cable that is suitable for most amplifiers we offer. For more information, see the datasheet under the tab "Downloads". Note: Sold per 10 meters...
€6.50
Ex Tax:€5.37
Model: SPKCABLERDBLK
Standard speaker cable that is suitable for most amplifiers we offer. For more information, see the datasheet under the tab "Downloads". Note: Sold per meter. With multiple quantities, it will be sold in one piece...
€1.00
Ex Tax:€0.83
Model: SPKCABLERDBLK-0.75-25M
Standard speaker cable that is suitable for most amplifiers we offer. For more information, see the datasheet under the tab "Downloads". Note: Sold per 25 meters...
€16.00
Ex Tax:€13.22
Model: SPKCABLERDBLK1.5MM
Standard speaker cable that is suitable for most amplifiers we offer. For more information, see the datasheet under the tab "Downloads". Note: Sold per meter. With multiple quantities, it will be sold in one piece...
€1.50
Ex Tax:€1.24
Model: SPKCABLERDBLK2.5MM
Standard speaker cable that is suitable for most amplifiers we offer. For more information, see the datasheet under the tab "Downloads". Note: Sold per meter. With multiple quantities, it will be sold in one piece...
€2.00
Ex Tax:€1.65
Model: SPKCABLETRANSP
Standard speaker cable that is suitable for most amplifiers we offer. For more information, see the datasheet under the tab "Downloads". Note: Sold per meter. With multiple quantities, it will be sold in one piece...
€1.50
Ex Tax:€1.24
Model: SPEAKTER
You can (for example) build this into the an enclosure to make your own amplifier...
€0.60
Ex Tax:€0.50
Model: 230VCBLSTRIP1.8M
A sturdy standard 230V power cable with stripped ends. The ends are tinned for more firmness...
€4.50
Ex Tax:€3.72
Model: 230VCBLSTRIP1.8M90D
A sturdy 230V power cable with stripped ends and right-angled 230V plug. The ends are tinned for more firmness...
€4.00
Ex Tax:€3.31
Model: 230VCBLSTRIP1.8M-C13
A sturdy standard 230V power cable with an angled 230V Schuko plug and a C13 connection...
€4.50
Ex Tax:€3.72
Showing 501 to 550 of 619 (13 Pages)
1
false
true
true
Remove
Change
tr