Categories

Arduino

Arduino

Arduino, the most popular opensource hardware platform used for your hobby. The possibilities of Arduino are almost endless, yet very easy to use!

Sort By:
A 9V battery box with a DC jack (5.5*2.1mm) and a switch to, for example, connect a 9V battery to yo..
€3.00 Ex VAT: €2.48
A 9V battery clip with a DC jack (5.5*2.1mm) to, for example, connect a 9V battery to your Arduino...
€0.75 Ex VAT: €0.62
A 9V battery holder with a DC jack (5.5*2.1mm) to, for example, connect a 9V battery to your Arduino..
€1.50 Ex VAT: €1.24
A simple buzzer to eg. indicate errors with an Arduino. With this active buzzer one only has to offe..
€1.00 Ex VAT: €0.83
A simple buzzer for an Arduino, for example to indicate errors. With this active buzzer only an inpu..
€1.00 Ex VAT: €0.83
A simple buzzer to for example indicate erros with an Arduino. With this active buzzer you only need..
€0.50 Ex VAT: €0.41
A simple buzzer module to indicate e.g. errors with an Arduino. With this active buzzer one only has..
€1.50 Ex VAT: €1.24
On this mounting plate you can put the following:With an Uno/Leonardo:Uno or Leonardo (or..
€5.00 Ex VAT: €4.13
Based on 1 reviews.
On this mounting plate you can say the following:Uno or Leonardo (or similar to that format) Br..
€4.00 Ex VAT: €3.31
This Arduino 4 Relays Shield is a board with four individually controlled relays. Specifica..
€19.00 Ex VAT: €15.70
This is the original Arduino Due from Arduino itself. In addition to our own variant we also offer ..
€38.00 Ex VAT: €31.41
This is the original Arduino Due from Arduino itself. In addition to our own variant we also offer ..
€36.50 Ex VAT: €30.17
The Arduino Ethernet Shield 2 has a W5500 ethernet controller and a microSD card reader. Sp..
€23.00 Ex VAT: €19.01
The Arduino Leonardo is a microcontroller board based on an ATmega32u4. This processor can handle US..
€19.50 Ex VAT: €16.12
Based on 1 reviews.
The Arduino Leonardo is a microcontroller board based on an ATmega32u4. This processor can handle US..
€18.00 Ex VAT: €14.88
This is the original Arduino Mega 2560 R3 from Arduino itself. In addition to our own variant we al..
€35.00 Ex VAT: €28.93
A housing suitable for the size of an Arduino Mega R3. This gives you Arduino the protection it mig..
€4.50 Ex VAT: €3.72
The Arduino Micro is a very compact microcontroller with an ATmega32U4 processor. Specifica..
€19.00 Ex VAT: €15.70
The Arduino Micro is a very compact microcontroller with an ATmega32U4 processor. This is a version ..
€18.00 Ex VAT: €14.88
The Arduino Motor Shield is based on the L298 driver. This module is able to control DC motors, step..
€20.50 Ex VAT: €16.94
The Arduino Nano is a compact microcontroller board with an ATmega328 processor. Specificat..
€19.00 Ex VAT: €15.70
The Nano 33 IoT is a microcontroller board from Arduino based on the SAMD21 Cortex. With 48 MHz, thi..
€23.50 Ex VAT: €19.42
The Nano 33 IoT is a microcontroller board from Arduino based on the SAMD21 Cortex. With 48 MHz, thi..
€19.50 Ex VAT: €16.12
The Arduino Nano Every is a compact microcontroller board with an ATmega4809 processor. Compared to ..
€12.50 Ex VAT: €10.33
The Arduino Nano Every is a compact microcontroller board with an ATmega4809 processor. Compared to ..
€11.50 Ex VAT: €9.50
Arduino Pin Header kit 2-4 Weeks
Make your own shield with this kit!Includes 1x 6 Pin headers, 2x 8 Pin headers and 1x 10 Pin hea..
€2.00 Ex VAT: €1.65
This is the Arduino Starter Kit developed by Arduino itself. The kit contains a project book with 15..
€80.00 Ex VAT: €66.12
This is the original Arduino Uno R3 from Arduino itself. In addition to our own variant we also off..
€20.50 Ex VAT: €16.94
A housing suitable for the size of an Arduino Uno R3. This gives you Arduino the protection it might..
€3.50 Ex VAT: €2.89
Based on 1 reviews.
A black housing suitable for the size of an Arduino Uno R3.Specifications:Suitable for Ar..
€3.50 Ex VAT: €2.89
A transparent housing suitable for the size of an Arduino Uno R3.Specifications:Suitable ..
€3.50 Ex VAT: €2.89
The Arduino Uno R3 is the standard microcontroller board from Arduino. This version of the board has..
€19.50 Ex VAT: €16.12
The Arduino Yun Rev 2 is a microcontroller board based on an ATmega32u4. This processor can handle U..
€51.50 Ex VAT: €42.56
The ATtiny88 Nano V3.0 is a compatible and cheaper version of the Arduino Nano V3.0. This variant is..
€5.00 Ex VAT: €4.13
This car can easily be assembled to a small car. The car is powered by 2 motors and has 1 caster whe..
€12.00 Ex VAT: €9.92
CAN Bus Shield - MCP2515 2-4 Weeks
With this CAN Shield you can make contact with your Arduino with a CAN bus, for example from a car. ..
€12.00 Ex VAT: €9.92
This car can easily be assembled to a small car. The car is powered by 4 motors for fast acceleratio..
€14.00 Ex VAT: €11.57
This car can easily be assembled to a small car. The car is powered by 2 motors and has 2 caster whe..
€12.00 Ex VAT: €9.92
This popular CNC shield can be used to make your own CNC. The shield can be used in combination with..
€5.00 Ex VAT: €4.13
This popular CNC shield can be used to make your own CNC. The shield can be used in combination with..
€5.00 Ex VAT: €4.13
A shield with an RTC(DS1307) and a SD card slot. (SD card is directly connected to the Arduino via t..
€7.00 Ex VAT: €5.79
Based on 1 reviews.
A very small Arduino with USB that is very suitable for smaller applications! The nice thing is tha..
€5.00 Ex VAT: €4.13
A very small Arduino with USB that is very suitable for smaller applications! The nice thing is tha..
€5.00 Ex VAT: €4.13
A very small Arduino with USB that is very suitable for smaller applications!   The nice thing..
€6.50 Ex VAT: €5.37
For more information about the Arduino Due you can check out the website: Arduino website - Arduino..
€25.00 Ex VAT: €20.66
Based on 4 reviews.
The EasyCat Shield is an EtherCat shield that can be used to make an EtherCat Slave from an Arduino...
€72.00 Ex VAT: €59.50
Ethernet Shield W5100 2-4 Weeks
You can easily connect his "Shield" onto for example an Arduino Uno(5V), Arduino Mega..
€11.00 Ex VAT: €9.09
Based on 2 reviews.
With this module you can determine with four addresspins(S0-S3) which of the 16 pins (C0-C15) is ult..
€2.50 Ex VAT: €2.07
This mosfet module based on IRF540 Mosfets makes it possible to control 4 different high-power devic..
€9.00 Ex VAT: €7.44
With this High-Power MOSFET module you can easily use the double mosfet through the separate connect..
€2.00 Ex VAT: €1.65
This TCA9548A module gives you the possibility to connect devices with the same I2C address to the s..
€3.50 Ex VAT: €2.89
With this module you can easily use the IRF520 MOSFET through the separate connections for power sup..
€1.50 Ex VAT: €1.24
Based on 1 reviews.
This shield has four handy buttons and a joystick. There are also pins available to easily connect y..
€5.00 Ex VAT: €4.13
This connector is often used to connect li-ion cells to a board. This cable can be connected to your..
€0.40 Ex VAT: €0.33
This handy keypad with 1x4 matrix buttons can be used to select a mode for example. There are many ..
€1.50 Ex VAT: €1.24
This handy keypad with 3x4 matrix buttons can be used to enter a pin code, for example, or to set a ..
€4.00 Ex VAT: €3.31
Based on 1 reviews.
This handy keypad with a 4x4 matrix of buttons can be used to, for example, input a pincode or set u..
€2.00 Ex VAT: €1.65
Based on 1 reviews.
This handy keypad with 4x4 matrix buttons can be used to enter a pin code, for example, or to set a ..
€4.50 Ex VAT: €3.72
Based on 1 reviews.
A 4x4 matrix keypad consisting of microswitch buttons. The module has four holes 3mm (M3) holes for ..
€1.00 Ex VAT: €0.83
A 4x4 matrix keypad consisting of tactile switch buttons.Four pins are thus used as 'x' c..
€1.50 Ex VAT: €1.24
Kingston 8GB Class 4 microSD card with SD-kaart adapter Discontinued
This microSD card is very suitable for simple applications, eg. to set up audio files or for eg. the..
€5.00 Ex VAT: €4.13
This microSD card is very suitable for simple applications, eg. to set up audio files or for eg. the..
€7.00 Ex VAT: €5.79
Kingston Canvas Select Plus 16GB Class 10 UHS-I A1 microSD card with SD-kaart adapter New!
This microSD card is very suitable for simple applications, eg. to set up audio files or for eg. the..
€5.00 Ex VAT: €4.13
Kingston Canvas Select Plus 32GB Class 10 UHS-I A1 microSD card with SD-kaart adapter New!
This microSD card is very suitable for simple applications, eg. to set up audio files or for eg. the..
€7.00 Ex VAT: €5.79
Kingston Canvas Select Plus 64GB Class 10 UHS-I A1 microSD card with SD-kaart adapter New!
This microSD card is very suitable for simple applications, eg. to set up audio files or for eg. the..
€9.50 Ex VAT: €7.85
This shield is based on an Adafruit shield and offers control for two servo motors and four DC motor..
€5.00 Ex VAT: €4.13
Based on 1 reviews.
A shield with an LCD and 5 usable buttons. (The reset button can only be used for the reset function..
€6.00 Ex VAT: €4.96
Based on 1 reviews.
A shield with an LCD and 5 usable buttons. (The reset button can only be used for the reset function..
€6.00 Ex VAT: €4.96
A LED traffic light module.Specifications:Color LED: Red, yellow, green. Led diameter: ..
€1.50 Ex VAT: €1.24
For more information about the Arduino Leonardo you can check out the website: http://arduino.cc/en..
€12.00 Ex VAT: €9.92
This TTGO T-OI is a variant of the D1 mini and compatible with most shields. The CH340 USB to serial..
€7.50 Ex VAT: €6.20
An Arduino made to work on textiles!For more information about the Lilypad itself, please refer ..
€6.00 Ex VAT: €4.96
This module contains a AAA battery holder and a step-up converter that makes the battery voltage a 5..
€5.00 Ex VAT: €4.13
An accelerometer (ADXL335) especially for LilyPad products. The accelerometer must be powered with ..
€8.00 Ex VAT: €6.61
An Arduino made to work in textiles!For more information on the Lilypad itself, please refer to ..
€8.00 Ex VAT: €6.61
A buzzer especially for LilyPad products. This is a passive buzzer, so you have to generate a signa..
€3.00 Ex VAT: €2.48
This is conductive wire which can be used in combination with LilyPad products. ..
€1.50 Ex VAT: €1.24
A CR2032 battery holder with on/off switch especially for LilyPad products...
€5.00 Ex VAT: €4.13
A red LED especially for LilyPad products. This LED already has a series resistor so you can use it..
€2.00 Ex VAT: €1.65
An RGB LED especially for LilyPad products. This RGB LED already has a series resistors for all the..
€2.50 Ex VAT: €2.07
A breakout board with WS2812 LED especially for LilyPad products...
€2.50 Ex VAT: €2.07
A li-ion or li-po to 5V module especially for LilyPad products. This module has a connection for a ..
€6.00 Ex VAT: €4.96
An on/off switch specifically for LilyPad products...
€2.50 Ex VAT: €2.07
A standard push button especially for LilyPad products...
€2.00 Ex VAT: €1.65
A light sensor (TEMT6000) especially for LilyPad products. By reading out the analog voltage you ca..
€4.00 Ex VAT: €3.31
Like the Digispark, the LilyTiny has an ATTiny85 with bootloader on board so that you can program vi..
€8.00 Ex VAT: €6.61
An CAN bus controller with MCP2515 chip suitable to connect every standard microcontroller with a CA..
€3.50 Ex VAT: €2.89
For more information about the Arduino Mega 2560 R3 you can check out the website: http://arduino.c..
€17.00 Ex VAT: €14.05
This sensor serves as a replacement for a PIR sensor and works with a microwave and Doppler effect. ..
€2.00 Ex VAT: €1.65
A simple buzzer to for example indicate erros with an Arduino. With this active buzzer you only need..
€0.50 Ex VAT: €0.41
With this mini MP3 module you can play various formats of music and have it controlled by your Ardui..
€4.00 Ex VAT: €3.31
Based on 2 reviews.
This kit contains 35 modules with sensors and actuators to measure or control almost anything. The k..
€32.00 Ex VAT: €26.45
With this MP3 shield you can play various formats of music and have it controlled by your Arduino. ..
€15.00 Ex VAT: €12.40
A board to make the pins of an Arduino Nano slightly more accessible. On the DC jack a voltage of 7-..
€5.00 Ex VAT: €4.13
With this Screw Board you can easily screw the wires to the pins on Nano-layout compatible boards. A..
€3.00 Ex VAT: €2.48
TinyTronics now offers a very cheap variant of the Nano V3.0. The differences with a default Na..
€6.00 Ex VAT: €4.96
TinyTronics now also offers a very cheap version of the Nano V3.0 to. The differences with the stand..
€5.00 Ex VAT: €4.13
For more information about the Arduino Nano you can check out the website: http://arduino.cc/en/Mai..
€8.00 Ex VAT: €6.61
Based on 1 reviews.